Brooch in the technique of tsumami kanzashi for the holiday Victory Day. Master class with step by step photo.
Shabanova Marina Gennadievna, teacher primary school, MBOU Sarasinskaya secondary school, Sarasa village, Altai district, Altai TerritoryST. GEORGE RIBBON
St. George's ribbon - and gunpowder, and fire,
And the bitterness of tears, and the joy of Victory Day.
Not just a proud symbol, but a silk epaulette,
For the good peace that our grandfathers got us.
St. George's Ribbon - like a surviving flower,
That I saw evil ruined childhood,
Burnt villages, deadly smog of ruins...
Not just a symbol - a legacy of memory *.
St. George ribbon - two-color simple stripes -
On the front roads blood and flames,
And the echelons of lives that have gone downhill ...
And a banner slashed with evil.
St. George's ribbon - and gunpowder, and fire -
And the sorrow of the soul, and the sun of a new life.
The pattern of two-color lines - the history of the palm,
Fate's ornament... Memorable word.
Natalie Samoniy
May 04, 2012
Let's make a brooch-symbol that will remind us of those distant days...
To work we need the following materials and tools:
- satin ribbon 2.5 cm wide in black and orange;
- St. George ribbon - 25 cm;
- a felt circle (two are possible);
- basis for a brooch (pin);
- the middle for a flower (beads);
- lighter (candle);
- scissors;
- tweezers, clamp;
- thermal gun.
Rules for labor protection when working with scissors:
1. Scissors should have blunt, rounded ends.
2. Work with well adjusted and sharpened tools
3. Put the scissors with the rings towards you, and with the closed blades away from you.
4. Do not leave cutting tools open.
5. Watch the blades move as you cut.
6. Pass the scissors rings forward, holding the closed ends.
7. Do not play with cutting tools, do not bring to the face.
8. When working with scissors, do not walk around the office. Work at the table.
9. Use these tools only for their intended purpose.
Rules for labor protection when working with a candle and matches, a lighter:
1. Remove loose hair.
2. Do not lean low over the flame of a candle or match.
3. The candle should be in a glass or tin container.
4. Do not throw burnt matches into the trash, but put them in glass, tin dishes.
Rules for labor protection when working with a thermal gun:
1. Do not leave unattended.
2. During operation, place the heat gun on a stand, and do not lay it on its side.
3. Work only with a serviceable tool.
4. Do not touch the tip of the gun and touch the hot glue.
5. At the end of the work, turn off.
Prepare the required number of pieces of satin ribbon.
Assembly.
Glue on a felt circle around the circumference with a thermal gun first row - 12 black petals.
For each of us, the month of May is associated not only with the beginning of warm days, the last sunniest month of spring and the landscaping of nature, but also with wonderful holiday Victory Day, which we all remember with respect. Even children know that May 9 is the main holiday for the country, that this is the day that reminds us of the great feat of our grandfathers and great-grandfathers.
Although many children have not found their veteran grandfathers alive, they will definitely go to the parade and proudly carry a photograph in the Immortal Regiment. Attached to the chest St. George ribbon. We offer you a detailed and understandable guide to creating an unusual version of such a victorious accessory.
1. On initial photo presents all the elements that will be needed for the base of the brooch and for modeling an elegant central flower. All of them are listed in the list, their sizes and quantity are indicated. Purchase wealth for creativity in any department for sewing and needlework.
2. Bend the tracks of the striped St. George ribbon 2.5 cm wide and 8 cm long across in half. Next, you need to cut each such part diagonally (obliquely). But this should be done not with scissors, but with hot metal, for example, a soldering iron or a wood burner. It is this method that will make it possible to obtain quadrangular (fastened together in the center) parts of two varieties.
3. By dividing all the prepared rep tracks in the above indicated way, you will get two types of petals, all of them will be pointed. From such details you get an unusual central flower.
4. From golden brocade, cut into squares with a side of 5 cm, make small inverted (convex) petals. Fold the squares diagonally.
5. Then bend the triangles again in the center. Glue the sharp corners in the resulting triangles. Then, without cutting the petals from the bottom, squeeze the inner part outward with your finger. Thus, beautiful golden petals are obtained.
6. To model a creative flower, prepare rep spiky, golden brocade convex petals, a hug and a bead that fits it in diameter.
7. Glue one part of the pointed quadrangular parts with an overlap, guided by the above photo. Due to the fact that the details are striped, the resulting model will look like a snowflake or even a cobweb. She looks very beautiful.
8. From the inside, glue a black felt coin.
9. On top of the presented model, lay out the golden convex petals, also placing them evenly around the circumference.
11. Make a characteristic loop from the orange and black track. At the bottom, cut the ponytails obliquely, select the length of the golden tire and glue to decorate the standard accessory.
12. Stick a flower on the loop (do not forget that there is black felt on the reverse side, which is intended for such fastening). Press a hugger with a half-bead into the center of the flower with your finger. A brooch needs to be attached to the back.
Now you know how to make a kanzashi brooch for Victory Day. Do not pass by this master class, in early May this information will definitely come in handy.
No one can argue that brooches have recently become an integral part of a person who follows fashion. I remember that our grandmothers always wore beautiful, shiny brooches for the holidays and it was believed that this sophisticated product emphasizes the taste of its owner. But like everything in the world, fashion changes a little, but the basics remain the same. So with the brooches there have been different changes. Modern craftswomen have developed this art so much that now everyone can choose an exquisite product for themselves or learn how to make such an ornament on their own. Here is one of the holidays where people massively put on a themed accessory is Victory Day. But why buy in a store and spend money if you can make brooches by May 9 with your own hands, while having a lot of fun?
Basically, these brooches are made with symbols this holiday. The most commonly used St. George ribbon or star. So in the master classes presented below, it will be possible to learn how to make a brooch, which should then be worn on Victory Day.
There is no limit to the imagination for creating such accessories. Some needlewomen also use beads in the manufacture of brooches, they are made from ribbons, badges, and artificial flowers. And the important thing is that every beginner is able to cope with such a task.
This workshop will show you how to quickly and easily make a very interesting kanzashi-style St. George ribbon brooch. This product is suitable for both adults and children. The execution technique is not difficult, it is important to adhere to step by step description and then everything will work out even for those who first decided to make such an accessory.
What you need to make:
We take an orange ribbon and cut into squares so that they are 5 cm in size, of which we should get 7 or 8 petals. We form a petal, for this we take one square and fold it diagonally. After, we should bend the corners of the triangle as shown in the photo below. With the help of a candle we fasten the corners, and we get a petal. Next, fold the side corners as indicated in the photo, carefully look. We fasten the corners with a candle, and now we have the first petal ready. In the same way we make the rest of the orange squares.
Now we make double petals, for this we cut 8 black squares and 6 orange ones. We fold each triangle and then put it on top of each other, as shown in the photo below.
Next, we need to solder the corners with a candle. We fold the resulting part in half and again connect it with a candle. The photo below shows how such a petal should look like. In the same way we form other petals.
Now you need to make sharp orange petals. To do this, cut 6 orange squares. Fold each square to make a triangle. Then we fold it again, and solder the corners. We connect the resulting corners and also fasten them with the help of fire. Get a corner. Then we fasten with the help of fire and get an angular petal.
Now, using a compass on the felt, make a circle, the diameter of which will be 3 cm. Then cut it out. We measure 25 cm on the St. George ribbon and cut it off. Now we fold it as you like, it can be in the form of a droplet or as indicated in this master class. When will we form desired shape, fasten the tape with glue.
Alternately glue double petals and pointed petals onto a circle of felt. When you get a flower, attach round petals on top of it with glue, as shown in the photo below. Glue a black round bead into the middle of our flower. And the next step is that we attach the flower to the tape using the same glue. And in order to keep our brooch, we fasten a clasp on the reverse side, which can be in the form of a pin. Our holiday brooch is ready.
Surely, everyone knows the kanzashi technique. In this technique, you can create a huge number of products that will have a very beautiful appearance. It is worth noting that crafts by May 9 from kanzashi look especially attractive. In our article you can find those ideas that will appeal to schoolchildren.
Beautiful brooches that are not difficult to make.
Even schoolchildren can make a beautiful brooch that can be fastened to the Victory Parade. In this case, the following materials will be required:
Progress:
Brooch for Victory Day using kanzashi technique.
If you decorate a Victory Day themed brooch with a flower that was made using the kanzashi technique, then it will also look quite beautiful. To make crafts you will need:
On a note! The process of creating the next brooch is more labor intensive. Therefore, you are advised to be patient.
Progress:
On a note! The number of petals on the brooch may be different.
How to decorate a St. George ribbon brooch with the colors of the Russian flag.
In this article, we list crafts for May 9 from kanzashi ribbons. To make the following craft, use the following materials:
Progress:
Finally
Basically, crafts for Victory Day from kanzashi look like beautiful brooches. Of course, these are not all ideas. And on the Internet you can find other master classes. But in this article, we have proposed only the simplest ideas that are quite pleasant to bring to life with your own hands.
DIY crafts for May 9- Part patriotic education preschoolers, they can be performed at home with parents, older sisters, and brothers, in kindergarten in a team with other children. As a rule, in kindergarten, pupils are offered the most simple ideas, for example, a three-dimensional star or several carnations tied with a ribbon. students also perform lower grades, a school exhibition is organized especially for the created works. At school, children already have enough skills to work with various materials so can make compositions.
Performing with young children DIY crafts for May 9, photo guided by a master class, you introduce the children to the history of the country, its tragic and heroic stories, explain to them the significance of this holiday, so that from early childhood they do not perceive Victory Day as entertainment and celebration, but put great meaning into this national holiday. In addition to children, craftswomen are also busy with creativity on the eve of the holiday, for example, they can make beautiful brooches using the St. George ribbon.
Of course, the most popular option is to perform for the holiday, which you can give to your grandmother. If veterans live on your street, you and your children can congratulate them and bow low for their courage and self-sacrifice in the struggle for the Motherland.
Postcard picture can be made by children senior group kindergarten, we will use a mixed technique that involves working with different materials, as well as a different approach. In this case, we need thick cardboard for the base, for example, gray or light blue, as well as white and colored paper. yellow color also, you can use the red colored paper Or red napkins. In progress crafts by May 9 do-it-yourself master will use scissors, a pencil and PVA glue. For a child, glue must be poured into a small container, for example, into an iron lid and provided with a brush to work with.
Our postcard will consist of two parts: a red star and snow-white flowers that resemble apple blossoms. For the red star, we will use paper lumps, and we will make the petals using the origami technique. Don't worry about origami too complex technique for the child, because in this case we need to make only a few folds to get a curved petal.
With your fingers, you need to cut off pieces of a red napkin and roll balls out of it. We recommend that you pre-roll a lot of balls and put them in a bowl, then stick them along the contour.
If the child will make a postcard, then the cardboard should be folded in half and decorate the front side. With a pencil, you need to draw the outline of a star, and inside it is the number "9", next to the word "May". On this contour it is necessary to stick red lumps, dipping them with the lower part in glue. While the glue dries, you can do the petals, for each you need to cut a circle 2.5 cm in diameter. Each flower will consist of five petals, and at least three of these flowers will be needed to decorate the postcard.
DIY postcard for May 9 can also be decorated with carnations, which are a symbol of the holiday. In this article, we will also tell you how to make a carnation flower using napkins, paper or corrugation.
For apple color, we need to fold one circle in half, and from the bottom we bend the corner inward and glue it, now when you open the petal, it will have a curved shape. The petals must be glued overlapping, and the core should be decorated with yellow balls.
Ideas on how to make voluminous crafts by May 9 with your own hands that can become part of the composition. You can make a three-dimensional star and make an eternal flame, you can make an airplane by printing templates on a printer and then gluing them together, or using corrugated cardboard, you can get a real tank. When you and your children do similar crafts, you can tell them about military equipment. Especially such creativity will be interesting to boys who are always interested in military subjects.
To create a tank, we will use the quilling technique, but we will not create small elements, but only large ones using corrugated cardboard. A student of an elementary school can cope with a similar task, and work with corrugated cardboard- pure pleasure. To make the tank look realistic, we will choose dark green or gray cardboard. In the process of work, we need a pencil, ruler, scissors, glue. For quilling, a special tool may also come in handy, but if it is not at hand, then you can use a toothpick.
The cardboard must be cut into strips: you will need one strip 2 cm wide, and 10 strips 1 cm wide. All prepared strips must be twisted into a spiral, and the ends fixed with glue. As a result, we got wheels for our tank (rollers). One row of rollers on each side will consist of five such spiral wheels, which must be glued together and wrapped in black paper.
A large spiral will be used as a tower, and you also need to twist the tube, which will serve as a muzzle. To assemble the tank, you need to glue all the details on a cardboard square: first the tracks, on top - a tank turret with a muzzle. Then it remains to glue additional elements, and draw a star on the tower.
Now you are ready do-it-yourself tank craft by May 9, if you want it to become part of the composition, then you can make camouflage for it, put small trees and tin soldiers next to it. Preschoolers can try to mold from plasticine.
The St. George's Ribbon is one of the main symbols of the Victory Day, so when creating it, children will definitely use it. In order not to have to glue the striped ribbon from separate strips of paper, you can go for a little trick and print the ribbon template on the printer, then cut it out and glue it. You can also find a ribbon bow template that can be used to decorate a postcard for a veteran.
The card can be decorated with red carnations, which are used to create corrugated paper. Ready-made flowers are glued to a cardboard base on one side, and the second remains lush, which allows you to create voluminous crafts. In addition to corrugations, napkins can also be used to create carnation buds.
Depending on the size of the flower, we need to cut circles of the required diameter from the corrugation, and then fold the circles so that as a result only a sector of a different eighth of the circle remains. You can see more details on how to fold a circle in the picture.
To do crafts by May 9 with your own hands, we need to get bulk flower, therefore, from the edge to the center, it is necessary to make many incisions, as we do "grass" for children's applications. Then the elements should be unfolded and the fluffy tips straightened. In the center of each circle, you need to drop a little glue, and then fold it in half.
From green colored paper, it is necessary to cut out the sepals and stalk with leaves. Form an application on cardboard: glue a red bud, stalk and sepal. From below, all flowers should be tied with a bow, which should be glued over the stems. In addition, the child can draw green stems with a felt-tip pen and write a congratulatory inscription.
For the smallest, you can offer to perform very simple do-it-yourself children's crafts for May 9. Pupils junior group kindergarten, it is difficult to work with scissors, so we have prepared for them original idea - bulk star, which should be decorated with paints.
For crafts, we need a template, which in duplicate must be printed on a printer. Each star will consist of two halves. Rays are separated on the star - they should be painted in orange and black, alternating them, as shown in the master class.
At the end, it is necessary to bend the blanks along the fold lines, this step can be started after the paint has dried. The two halves should be glued together with PVA glue.
If there is no template, and for the application or composition for the competition it is necessary to make a three-dimensional star, you can use another idea to create it. To do this, you need to use colored paper, on which with a pencil draw the outline of a six-pointed star. We will use one extra ray to make the asterisk voluminous. The resulting workpiece must be bent to determine the fold lines that separate the rays, then bend all the rays to the center to get clear fold lines.
Between the two beams, an incision should be made to the middle of the workpiece, put one beam on top of the other and glued. Now you have a star with a voluminous central part, and its rays should be glued onto a cardboard base when creating an application.
If you are wondering which original crafts by May 9 with your own hands a real craftswoman can make, then you should, first of all, pay attention to the St. George ribbon, because with its help you can get a beautiful brooch using the kanzashi technique.
On the Victory Day parade, it is customary to attach a St. George ribbon to a pin on a jacket or blouse, but you can do beautiful flower as when working with satin ribbons. You can add the colors of the Russian flag to such a brooch, make it multi-layered. Your friends will be delighted if you present them with such a gift on the occasion of a national holiday.
Even those craftswomen who are not familiar with the kanzashi technique can do DIY crafts by May 9, video will tell you in detail how to properly form the petals. When working with ribbons, it is very important to process the edges with a lighter so that the threads do not crumble. To work, place a candle on the table, first cut the tape into squares, then process its edges with fire, holding the cut with tweezers so as not to burn yourself. The finished brooch can be glued onto a pin.