Do-it-yourself cover for a 19 liter bottle. Do-it-yourself bottle cover: how to make an original decoration using different techniques. Materials and tools

25.10.2020

A decorative cover for a 19 l bottle is the best solution for those who prefer to use pumps instead of buying a full-fledged cooler. In this case, a practical, bright and aesthetic accessory allows you to adapt the water container placed in the interior to the overall style of the space. At the same time, you do not lose the comfort of filling containers with water, and the liquid is protected from direct sunlight, which can negatively affect its microbiological parameters.

Are you planning to buy decorative covers for 19 l bottles in St. Petersburg? Pay attention to the offers posted in our online store. The price presented here for purchases in small and large wholesale fully meets the most daring expectations of customers, provides the maximum benefit when placing an order. And prompt delivery becomes a pleasant addition to the high quality of service demonstrated by AquaBalt.

Decorative covers for bottles - it's convenient and beautiful

Do you still have decorative covers attached to the bottle from above? Such an accessory can become a real decoration of a home or office space, it will allow you to easily integrate a clean water supply source even in a small area. In our catalog you can easily find covers:

with romantic plots;
views of the most famous cities and countries;
characters of popular animated cartoons;
fruits and berries;
symbols of famous brands;
graphic ornament;
species of wildlife;
patriotic symbols;
many other drawings.

Original and practical cases for bottles are invariably popular in many countries of the world. They do not require complex care - it is enough to periodically subject the product to processing in washing machine and dry it thoroughly. Due to the presence of a wide transparent strip, the cover does not interfere with monitoring the level of water in the bottle. And the variety of decorative solutions makes such an accessory even more convenient to use. Change the covers according to your mood, seasons or other factors and create a positive mood in your kitchen or office space.

Why buy covers for 19 l bottles from us? In the online store "AquaBalt" you get the best combination of price and quality of such products, you can choose the appropriate solutions from a wide range of products. In addition to covers, we offer a wide range of pumps and coolers, as well as water for delivery in St. Petersburg. You can immediately make a large wholesale order, so as not to pay several times to suppliers, and get a decent level of products for a reasonable fee.

Increasingly, residents of modern megacities are resorting to the services of water deliveries. In almost every home there is a cooler or pump with a bulky bottle. It is often difficult to fit these units into the interior of the kitchen, but nothing is impossible for modern craftswomen: they came up with and brought to life the creation of cases for large bottles.

This practice was "transferred" from bags from small bottles and "clothes" for vessels with alcohol. If we can beautifully drape small containers, why not use the skill for voluminous, nineteen-liter bottles?

Moreover, for this it is not necessary to buy a large piece of fabric - you can make a cover from shreds left over from the main sewing. Or use them for the bottom, and make the “body” monophonic.

The prices for some fabrics "bite", so many of us simply do not raise our hands to throw out the shreds. Most needlewomen-seamstresses have a lot of such pieces, they lie idle for a long time. Therefore, you can “adapt” them to decorate a large (and not only large) bottle.

To do this, we cut the shreds into small squares - they do not have to be the same, the rest is simply cut off and overcast on a typewriter. But united by a common geometric shape, the rags will look prettier. The bottom of a standard bottle that water delivery brings has a diameter of 27 centimeters, and its circumference is 85 cm. It is better to take with a margin of 28-30 cm and, accordingly, 86-88 cm.

A cape for a large container is made quite easily. It is necessary to sew the bottom - do square shape cover or cut out a circle. We prepare a template from cardboard, cut off the sewn fabric of the bottom. If necessary, we overcast and beautifully stitch the squares in the center. To give shape, you can spur the patchwork bottom with a padding polyester or other bulky fabric. It is also a good idea to sew in a cardboard base - if the bottle is upside down in the cooler, over time the edges of the cover will not fall off or wrinkle. If the bottle is with a pump, it makes no sense.

For the main cover, you will need a meter of fabric in length and 55 cm in width. If you want to make a neckline with a tie, the width should be larger in order to bend and sew a pocket for an elastic band or braid. A tightened neck is not necessary for “cooler” bottles, but with a “pump-action” cape, an loose cape will fall off.

Sewing a cover for a large round bottle is quite simple. We already have the bottom, and the main fabric needs to be measured by the bottle, processed the edges and sewn to the bottom. To make the cover look stylish and elegant, we retreat small folds on the fabric, then the “bottle clothes” will look more voluminous and neater. The little thing can be decorated with pockets, beads or beads, or a unique inscription can be embroidered.

And if there is no desire to sew, it is enough to purchase a wide ribbon and creatively drape the bottle.

Even easier - buy a large square of fabric, put a bottle in its center, lift the edges and tie them beautifully at the neck. And the original cover will be ready in two minutes!

Discussion of the article

Sometimes it is so difficult to choose the right gift, especially for a man. But the secret can be hidden in the original gift packaging or an interesting presentation of the most trivial item. I want to tell you how to original packaging handmade gift. This package is a cover for a bottle or a cup, which will not only give the most simple gift zest, but can also be used later for decoration and maintaining the desired temperature of your favorite drinks.

We will sew a gift case for a bottle of wine, however, packaging for a simple cup or any other "glass container" is made in exactly the same way, you just need to adjust the dimensions of the original blanks.

Materials and tools:

2 scraps of bright fabric, about 30x20 cm each
4-5 buttons, ribbon, twine or braid for fasteners
felt or other similar fabric for the pocket
beads, buttons, ribbons, patches, etc. for registration
scissors, pencil, ruler, pencil, needle, thread
fabric glue or hot silicone glue gun
sewing machine (optional)

Progress

Think carefully about your choice of fabric. It will take quite a bit, but the external attractiveness of the whole work will depend on it. As the front fabric, you can use cotton with a bright pattern, velvet or even jeans if you want to give the case a more brutal look. appearance. The main thing is that the fabric is nice and does not stretch too much, keeping its shape (therefore, it is better not to use knitwear, it will stretch and simply slide off the cup or bottle).

For lining, it is better to take a soft and dense fabric that will help maintain the initial temperature of the drink. Personally, I used for these purposes a bike with a soft pattern, matching in tone to the front fabric. However, you can, on the contrary, choose a contrasting option or even make a double-sided case, decorating both sides.

We select the appropriate decor for the selected fabrics (buttons, ribbons, braid, etc.) and cut out two rectangles, according to the pattern. The pattern is given from the calculations of a standard wine bottle, since their sizes are quite universal, unlike, for example, tea cups. If you are going to decorate a vessel of an unusual shape, the pattern should be adjusted to its actual size. This is easy to do with a tailor's meter, remembering to add processing allowances.

Tip: if you are making a cover for a container for hot drinks, you can insert a pad of batting or synthetic winterizer inside the cover so that it keeps the temperature better.

Before sewing the details of the cover, you should draw up its front side. This is the moment when you can show maximum imagination and use all the little things at hand: fabric scraps, ribbons, stripes, buttons, beads, etc. I suggest making a small felt pocket on the front side, into which you can insert, for example, a card with the name of the donor or a banknote, and use it in a teacup to store a tea bag or sweets. It can be given the most bizarre shape, the main thing is that it does not turn out to be too large.

I suggest sewing it with decorative stitches using thick, bright threads such as iris or floss. The rule is simple: we do everything that you want to sew or embroider at the very beginning, we leave small details that we plan to simply glue to the cover until the product is almost ready.

We also sew buttons on the front side in a mandatory manner, with the help of which our cover will hold. It will be enough 4-5 pieces, located at an equal distance from each other. When sewing on buttons, be sure to leave about 2 cm between them and the edge of the fabric - this is a seam allowance.

Tip: you can replace the buttons with a zipper. It will look especially impressive in combination with denim. And if there is a desire to make a more feminine and romantic version of the packaging, the buttons on both sides can be replaced with ribbons that are tied with cute bows.

If the decor has already taken its place, it's time to sew the details of our cover by folding them front sides inside. It is most convenient to do this with a sewing machine, but if it is not at hand, it is quite possible to do it manually. To use for this, I recommend a frequent running seam or a seam forward with a needle, then the parts of the fabric will be connected quite firmly.

The side opposite to the one on which the buttons are sewn is sewn only along the edges, leaving an open area for loops. Through the same hole, we turn the product on the front side.

For loops, we make blanks of braid, twine or ribbon by eye. The main thing is that the case wraps around the bottle or cup tightly enough. We outline with pins or a pencil the location of the loops exactly opposite the buttons. They can be hand-sewn with a blind stitch, over-stitched on a sewing machine, or simply glued on using a hot glue gun or special fabric glue that can be found at any craft supply store. The hinges must be securely fastened, and the opening in the case must be completely closed.

Our gift box is almost ready. It remains to glue buttons and bows to it, to taste, invest greeting card and solemnly hand over to the addressee. The beauty of such packaging is that it will make even a simple gift very personal and can be used as a reminder of you for a long time to come.

In recent years, it seems that the world has become completely and completely littered with water bottles. Probably, people strive for nature and try to lead a healthy lifestyle. Water bottles, whether plastic, glass or metal, have filled the shelves of supermarkets and shops. This is very good, we are 100% supportive of people striving for healthy lifestyle life. Sometimes, going for a walk in the hot summer, you want to go light, but you can’t get away from a faithful companion - a bottle of water. But it is very inconvenient to carry it in your hand, so we offer you an idea on how to sew a bottle cover. A handy bag that will allow you to easily carry your favorite soft drink with you, as well as look interesting and stylish.

Required materials and tools:

glass bottle of your favorite drink;
canvas or linen, denim is also suitable;
threads (choose a bright color);
scissors;
ruler;
tape measure;
sewing needles;
sewing machine with zigzag stitch.

We determine the dimensions, cut out

Before you sew a stylish bottle cover, you need to know the dimensions. Using a measuring tape, measure the height (we advise you to measure to the end of the widest part of the bottle, and not to the neck), add 8 cm and the girth of the bottle, add 3 cm. This will be the main part of the case. Cut out a rectangle of the appropriate size fabric.

Sew the main part of the cover

First, we will process the sections, bend the edges of the fabric of the upper and lower sides of the bottle where we added 8 cm (4 cm on each side). And we lay a line, the width of the seam in the finished form is approximately 2 cm. Now we fold the fabric face to face and stitch the side seam (where the allowance is 3 cm), the width of the seam in the finished form is approximately 1.5 cm. The main part of the cover is ready.

We make the bottom of the cover

We cut out a piece of canvas measuring 10x15 cm. We will make the bottom of the cover from it. We sew the rectangle along the long side, turn the resulting pipe on the face. Align so that you get a rectangular strip. We put the strip inside the main part of the cover, and manually make bartacks along the line, to a width of 4 cm (see the figure below), fixing the bottom on both sides.

We make a pen

Determine the length of the handle at your discretion, and we suggest making a width of 4 cm. Fold it in half along the long side and lay a zigzag stitch. It's a long, narrow strip. We sew it manually with bartacks along the seam of the main part of the cover (more details in the figure).

Fitting

Our product is ready. You have learned how to make an interesting bottle case. Now you can always take a bottle of your favorite drink with you and transport it in a convenient and stylish handbag. You can also come up with a variety of decorations for your case, such as thread tassels or embroidery, all this will look organic and decorate the product. Wear it with jeans and cotton sundresses, to the city and to the beach. May it bring you joy.

According to tradition, on holiday table there must be some kind of alcoholic drink. It can become a real themed decoration if you make a bottle case quickly and easily with your own hands. Such an accessory would also be appropriate if alcohol is presented as a gift for any holiday.

We make New Year's bottle covers with our own hands in a step-by-step MK

New Year is one of the most beloved holidays in our country, on this day a table is set in every house. The highlight of the serving can be a bottle of champagne, decorated with a themed case.

The monkey is one of the brightest symbols of the Eastern calendar. On the occasion of the onset of her year, a bottle of champagne can be sewn into a cover in the form of a banana with a monkey.

For its tailoring, materials will be required:

yellow and brown felt;
needle and thread;
scissors.

The base of the cover will be made in the form of a banana. From yellow felt, cut out the details according to the pattern below.

We sew the parts in the direction from the handle to the tip, while not bringing the seam to the end, leaving a hole so that our banana can be freely put on the bottle.

According to the next pattern, we cut out the details for sewing a monkey.

We sew the details, for the tail we cut off a longer strip, we wind it on the banana stalk. The tail can be additionally fixed with a glue gun or carefully sewn on. Ready.

Such a cover will become a bright and symbolic decoration. New Year's table or original gift decoration.

Santa Claus is one of the most popular symbols of the New Year, a bottle on the table decorated with this character will come in handy.

You can sew such a cover in just half an hour. For it you will need red and white felt, scissors, threads and a needle or a glue gun.

According to the pattern below, cut out the details of the fur coat and hat. We sew with threads with a needle or fix it on a glue gun.

Ready! In such a simple and quick way, you can create a symbolic bottle case with your own hands.

Lovers of knitting with the help of their favorite hobby can also knit a beautiful, cozy cover on a bottle.

The easiest way is to tie a rectangle equal in height to the bottle and sew it with a mattress seam (no need to knit the bottom). You can also knit in the round on stocking needles. Knitted covers made in jacquard technique look especially beautiful.

On February 23, the bottle can also be decorated with an original case, such a design will look especially symbolic if its theme is related to the type of activity of the man who will be presented with the present.

For example, for someone who served in the airborne troops, you can crochet a cover in a couple of hours, as in the photo.

It will require yarn of dark green, blue, blue, white, yellow flowers and hook.

We collect a chain of air loops equal to the diameter of the bottom of the bottle. We connect in a ring, we knit in a circle with columns with a crochet. In the course of work, we apply the product to the bottle in order to make timely reductions.
Having reached the neck, for the collar we knit several rows with straight and reverse rows.
From white and blue yarn we knit a small triangle in strips - a vest, carefully sew between the lapels of the collar.
We knit a beret from blue yarn.
Add military attributes from yellow and red yarn.

Such an unusual design will make the gift not only beautiful, but also very symbolic!

For any military man or a man who served in the army, you can sew a simple but effective camouflage fabric cover.

It will require a small piece of khaki fabric, braid, a red patch, scissors, threads.

We measure the width and height of the bottle, cut out a rectangle of the following sizes from camouflage fabric: bottle width + 4 cm, two bottle lengths + 5 cm.
From the red fabric, cut out the application in the shape of a star. Sew it to the cut out rectangle of fabric (so that it is in the middle of the front part).
We carry out the side seams of the cover.
We hem the top so that there is a small hole for the braid.
We twist, thread the braid.

The cover is ready, it will definitely not leave indifferent any military man!