What can be done for the New Year with your own hands from paper: photo. We create voluminous New Year's decorations from paper Volumetric figures for the new year

21.08.2022

New Year decoration homemade, handmade, production create a very special atmosphere. This is the feeling of a holiday for which they were preparing, which they were waiting for, and for which there is no pity for time.

Manufacturing New Year's toys and DIY accessories can be a good family tradition. After all, this is a long process when you can get together in the evenings or weekends - and create together. Funny jokes, cozy conversations and, most importantly, without which a real family is not possible - a joint business.

Everyone can participate in the creation of New Year's toys for the Christmas tree in 2020 from a variety of materials - both adults and children, even the smallest ones. You only need to choose suitable options and ideas.

And when the holiday is over, put your handmade creations in boxes. Then, until the next New Year, you can sometimes look into them and remember how fun it was to do all this.

Perhaps the most simple toys- Christmas decorations made of paper. You only need scissors, a little glue and a maximum of imagination to make, for example, a beautiful garland.

A chain of snowflakes, decorated with large decorative beads, can become a decoration in 2020 not only for the Christmas tree, but also for the children's room. Having folded a sheet of paper several times, the shape of a snowflake is cut out in it. Then they unfold. Many of these parts are fastened with glue. The length of the garland can be any.

A colored paper ring will look spectacular on a large Christmas tree if it is itself large. Everything happens according to the following scheme:

A ring is cut out of a sheet of colored cardboard.
Then a strip of colored paper is taken, folded like an accordion and glued inside the ring.
Squares are cut out of colored sheets and placed along the folds of the accordion.

Old toys - in business

In families where children have already grown up, a lot of old toys - soft, plastic, wooden - often accumulate. Why would they gather dust in the closet when they can come up with new ideas and make original jewelry for the tree?

Toys can be darned a little, tinted, decorated with beads or rhinestones. Then attach ribbons to them - and hang them on the Christmas tree.

Paper Santa Claus

Santa Claus can be different. Paper ones too! Any ideas are welcome in 2020.

Here is one of them:

The basis for this toy is a paper plate. It needs to be covered in white. acrylic paint. Wait until completely dry.
Then make Grandfather's nose by crumpling a piece of paper and pasting over the ball with white stripes. Eyebrows and cheeks are also formed. Everything is glued to the plate and painted white.
Then the "face" is covered with a flesh tint. Cheeks and nose are a little red. You can add clarity to the features using a felt-tip pen.
The mouth and eyes are allowed both to draw and stick in the form of an application.
A hat for Santa is made of red paper. A triangle is cut out, and a cotton ball is glued to its top. A beard is also made from it - it is better to take a wide strip. And from thinner ones - stick on eyebrows and mustaches.

Ideas "grandfather" can be different!

For example, you can make it in the shape of a cylinder. A large or not very sheet of colored cardboard is bent so that a pipe is obtained. The cap is formed in red. And along its lower edge a white strip is attached. The eyes are cut out of paper, the beard can be made of cotton wool. The nose is made of a foam ball. If you attach legs to the “grandfather”, he will settle very well by the Christmas tree in 2020.

Such Santa Claus will turn out great from felt or other suitable materials.

Quite simply

There are very simple options for Christmas tree-2020. So, a garland of corrugated colored paper is made in just a few minutes. The main thing is to know the technology.

We simply cut the material into narrow strips, and then twist it, forming separate segments. And so on ad infinitum. We glue the parts. This is a very delicate decoration.

Other ideas - cut corrugated paper into wide bands. Make a fringe along both their edges. And then just twist a little.

A little more difficult is a garland of colored circles. You can buy such large confetti in the store. They are folded in half around the thread or fishing line and glued together.

In the course is everything that is at hand! Colored napkins transform before our eyes and turn into bright bouquets.

To do this, fold each napkin several times, and then give any shape to the “petals”. Fasten in the middle with a stapler and straighten. You can connect two napkins of different colors. When a lot of blanks accumulate, they are strung on a thread - a garland is obtained.

In addition to the garland, many different things can be made from napkins. New Year's crafts, for example, a Christmas tree. It is very simple in execution and anyone can cope with such a Christmas tree.

Garlands for every taste

Garlands can be made from anything. For example, from triangles of fabric. Or from squares of felt. Or from old small soft toys.

And even from popcorn mixed with beads! You can tie together a lot of sweets in a beautiful wrapper with bright ribbons.

The remnants of wallpaper, preserved after repair, are suitable as a material. They can be cut into strips, which are then glued into rings, inserting one into the other.

Knitted ornaments

Crochet or knitting enthusiasts can use their skills to create Christmas tree decorations in a big way. Various knitted things are in fashion in 2020. The ideas are simply amazing.

Knitted snowflakes from the remnants of yarn can be assembled into a garland and hung, for example, on a window.

They knit different animals for the Christmas tree, including the symbol of 2020 - the Pig. Good knitted Santa Claus and Snow Maiden. And you can tie the Christmas tree itself.

Balls and balls

What Christmas tree in 2020 without balloons? These Christmas decorations you can do it yourself from paper, felt from wool, make from other materials. The main thing is to find good ideas.

Old factory balls become an excellent basis for such products, it is better if they are made of plastic or foam. Then they won't break.

For decor, it is proposed to take beads - you can find plastic or glass beads in your grandmother's jewelry box, you can take beads. Today, many decorative beads are sold. This chain is wrapped around the ball in the form of a spiral. Each coil is glued.

An interesting solution in 2020 is to take 3 strands of beads of different colors and sizes. And alternate them in the design of the ball. When the entire surface is covered with beads, the tip of the thread is hidden and fixed with glue. The loop for hanging the toy is fixed to the cord.

A ball for a Christmas tree can be made from thick paper or cardboard. If it has a drawing on it, fine. The toy will look more spectacular if the material of two contrasting colors is used.

To create these Christmas decorations:

Twenty circles are cut out: equally of both colors.
Then each is bent in the middle, unfolded and bent at a right angle.
Again they unbend and make "wings" - only three.
Ten circles are glued together alternately - the side of the ball is obtained.
Then they make its “tops”, connecting five circles each.
Everything is assembled into a common structure.

winter flowers

A foam ball in 2020 can turn into a luxurious, exquisite French-style decoration. It will take only a pack of pins with decorative heads in the form of beads. AND colored paper from which flowers with four petals are cut. Such blanks can also be found in art stores.

Putting together two parts, they are pierced in the middle with a pin and attached to the ball. Unusual Christmas decorations are obtained.

Instead of flowers, you can use sequins or other ideas.

Threads, PVA glue and balloon ik is needed for making an openwork toy for a Christmas tree or decorating a room.

The technology is simple. First, the balloon is inflated. Then the glue is diluted in water. A thread is wetted in it, which is wrapped around the warp. You can make a toy of the same color or different shades.

The number of turns depends only on your desire. For drying, the product can be hung on something. And when everything dries well, pierce the rubber ball and remove it. Such a cobweb looks interesting and elegant. It can be decorated with beads, bows or something else. Christmas decorations in such a light style will appeal to many.

Bump after bump

Christmas decorations from cones are made quite simply, but they always look impressive. For example, a ring:

The basis for it can be ordinary clothes hangers made of thick wire. They form a circle. You don't have to touch the hook.
Having untwisted the connection of the ends of the wire, cones are strung on one of them. They can be used in their natural form or dyed, for example, with gold or red paint.
Before or after stringing, a small plastic ring is attached to each cone with glue.
Having finished picking up the wreath, the wire is connected again and twisted.
A large satin bow is tied to the base of the hook.
An additional charm is given to the wreath by sprinkling it with sparkles or decorating it with beads, ribbons, bows or artificial snow.

Such a decoration, made in the main shades of the decoration of the Christmas tree, will look especially stylish.

improvised material

Fans of everything unusual will love holiday decor ideas in 2020 from completely unexpected things.

So, a snowflake for a Christmas tree can be created from ordinary wooden clothespins:

You will need a few clothespins and glue. To begin with, each is divided into 2 parts. The spring is removed and set aside.
The halves are pressed with flat sides of 2 pieces and connected with glue. Then a snowflake is assembled from such details.
You can finish this or paint the product with silver paint, sprinkle with sparkles or beads, after lubricating the clothespins with glue.

Old notes also become a source of inspiration when creating New Year's decor:

First, a square is cut out of the sheet. Then it is folded in the form of an accordion, which is tied with a thread in the middle. The ends are left free to make a hanging loop out of them.
Straighten the accordion so that a circle is obtained and glue its edges.
You can decorate the toy with a circle of cardboard of the same shade as the paper. Sequins and rhinestones are also a suitable decoration.

Old photos and postcards turn into bright original balloons in the blink of an eye:

Each sheet is cut into strips with a width, for example, about one and a half centimeters. Then they pick up a needle with a thread threaded into it and sew the strips from one end, then from the other.
You can use a button with a long awl instead of a needle. Having pierced the strips with it, the tip is bent.
A loop or ribbon bow is glued to the upper edge of the ball. Several of these toys create an interesting elegant garland. You can put light bulbs inside the balls.

New Year paper crafts

Do-it-yourself volumetric paper snowflake

Such a voluminous snowflake made of paper is a wonderful New Year's decoration for any interior. A paper snowflake will surely please your children, relatives and guests.

For the snowflake big size we use only thick paper, and also add more lines.
The snowflake can be made from paper of any other color - it all depends on the color of your Christmas decor. You can also use wrapping paper.

materials, needed to make paper snowflakes:

six squares, cut out of paper, preferably white and the same size.

Any paper is suitable for making snowflakes. The side of each square cut out of paper can be from 10 to 25 cm.

Tools:

ruler;
simple pencil;
scissors;
stapler.

How to make a three-dimensional paper snowflake:

1. Bend each of the six squares diagonally in half. We make markings of three parallel lines on each of them. The width of the segments should be the same. We draw lines with a simple pencil(they are drawn in red in the photo only so that they can be seen better). Then we cut the outlined lines with scissors, starting from the edge and not reaching a little bit (leaving a couple of millimeters) to the middle.

2. Now we open the square folded diagonally and put it face up in front of us.

4. Then we turn the snowflake to the other side and connect the next two strips closest to the center, fasten them with a stapler.

5. We continue to turn the snowflake over and staple the remaining strips with a stapler.

6. We do the same with the five remaining squares of paper. Then we staple the three parts of the snowflake together in the middle with a stapler. We do the same with the remaining three parts of the snowflake.

7. Now we connect these two large parts of the snowflake to each other.

8. At the points of contact of each individual part of the snowflake, we also fasten it with a stapler. This is necessary in order for the snowflake to keep its shape.

9. Now we decorate the snowflake according to our own taste, for example, you can stick sequins, sparkles.

That's all! Christmas decoration is ready! A snowflake can be hung on a Christmas tree, a window, a wall ...

Another version of the snowflake. It is made from two sheets of plain or thicker paper.
1-2. First we bend the sheets as in the figure.
3. Cut out a checkmark from the resulting triangle.
4. We make cuts on the remaining checkmark, but do not cut through to the end, otherwise the snowflake will break.
5. We bend the rays so that the snowflake is voluminous.
6. We bend each middle beam on all four petals of the snowflake inward and glue it in the center.
7. Repeat operations 1-5 with the second sheet of paper. Then we put it under the first half of the snowflake, so that the lower rays are between the upper ones. Then we bend as in paragraph 6, but we glue the rays not in the center, but at the points where the rays diverge at the top snowflake.

Snowflake from strips of paper

See the photo master class for the sequence of making snowflakes:

Prepare two snowflake fragments, each of which is 6 strips of paper, then connect them, as in the photo

We glue the strips, as in the photo, and fix them with paper clips until completely dry.

We made two “half-snowflakes”:

Add them up back sides to each other
Connecting with glue

We fix with paper clips, we wait for drying:

This is how the junctions of the ends of the strips look like:

And once again, all in one photo:

More difficult option striped snowflakes:

Balls imitating cones from strips of colored cardboard different lengths , rolled accordion

You can also make such snowflakes from old magazines

master class from Tiffany Lin

Tiffany marked out inch petals for future snowflakes. We can focus on two centimeters, for example.

In total, you need to cut 140 strips. Of these: leave 20 strips along the length of the page, cut the next 40 by 1 cm, cut the next 40 already by 2 cm, and cut the last 40 by 3 cm shorter. Refer to the photo above.

Fold each petal using 5 strips of each size. The longest strips, for the central beam of the snowflake, are taken once, the rest twice (once on each side).

We glue and place under the press for the time of gluing.

For reliability, you can temporarily tie the tip of the petal.

In addition, we cut out more strips for the central part of the future snowflake.

We also glue this ring and fix it for the successful setting of the glue.

When the petals are glued, we process the end of the workpiece with a glue gun.

Glue is not to be regretted! We are processing well.

Then glue the petal blank to the central ring.

We act in this way with four petals, gluing them so that we get a cross.

Then glue the remaining petals. This method allows you to glue all the blanks symmetrically.

After that, we glue the petals together so that the snowflake does not fall apart.

Decorate the snowflake with sparkles.

How to make such snowflakes

Birds of happiness for your home:

Fold the paper in half and cut it out as in the photo on the left: Then unfold the wings and fasten them to the body of the bird. Glue the body halves.

How to make such a snowflake:

Nov 28, 2016 Galinka

New Year paper crafts

Do-it-yourself volumetric paper snowflake

Such a voluminous snowflake made of paper is a wonderful New Year's decoration for any interior. A paper snowflake will surely please your children, relatives and guests.

For a large size snowflake, we use only thick paper, and also add more lines.
The snowflake can be made from paper of any other color - it all depends on the color of your Christmas decor. You can also use wrapping paper.

materials, needed to make paper snowflakes:

six squares, cut out of paper, preferably white and the same size.

Any paper is suitable for making snowflakes. The side of each square cut out of paper can be from 10 to 25 cm.

Tools:

ruler;
simple pencil;
scissors;
stapler.

How to make a three-dimensional paper snowflake:

1. Bend each of the six squares diagonally in half. We make markings of three parallel lines on each of them. The width of the segments should be the same. We draw the lines with a simple pencil (in the photo they are drawn in red only so that they can be better seen). Then we cut the outlined lines with scissors, starting from the edge and not reaching a little bit (leaving a couple of millimeters) to the middle.

2. Now we open the square folded diagonally and put it face up in front of us.

4. Then we turn the snowflake to the other side and connect the next two strips closest to the center, fasten them with a stapler.

5. We continue to turn the snowflake over and staple the remaining strips with a stapler.

7. Now we connect these two large parts of the snowflake to each other.

8. At the points of contact of each individual part of the snowflake, we also fasten it with a stapler. This is necessary in order for the snowflake to keep its shape.

9. Now we decorate the snowflake according to our own taste, for example, you can stick sequins, sparkles.

That's all! Christmas decoration is ready! A snowflake can be hung on a Christmas tree, a window, a wall ...

Snowflake from strips of paper

See the photo master class for the sequence of making snowflakes:

Prepare two snowflake fragments, each of which is 6 strips of paper, then connect them, as in the photo

We glue the strips, as in the photo, and fix them with paper clips until completely dry.

We made two "half-snowflakes":

Place them back to back
Connecting with glue

We fix with paper clips, we wait for drying:

This is how the junctions of the ends of the strips look like:

And once again, all in one photo:

A more complex version of a snowflake made of stripes:

Balls imitating cones from strips of colored cardboard of different lengths, rolled accordion

You can also make such snowflakes from old magazines

master class from Tiffany Lin

Tiffany marked out inch petals for future snowflakes. We can focus on two centimeters, for example.

Fold each petal using 5 strips of each size. The longest strips, for the central beam of the snowflake, are taken once, the rest twice (once on each side).

We glue and place under the press for the time of gluing.

For reliability, you can temporarily tie the tip of the petal.

In addition, we cut out more strips for the central part of the future snowflake.

We also glue this ring and fix it for the successful setting of the glue.

When the petals are glued, we process the end of the workpiece with a glue gun.

Glue is not to be regretted! We are processing well.

Then glue the petal blank to the central ring.

We act in this way with four petals, gluing them so that we get a cross.

Then glue the remaining petals. This method allows you to glue all the blanks symmetrically.

After that, we glue the petals together so that the snowflake does not fall apart.

Decorate the snowflake with sparkles.

How to make such snowflakes

Birds of happiness for your home:

Fold the paper in half and cut it out as in the photo on the left: Then unfold the wings and fasten them to the body of the bird. Glue the body halves.

```````````````````````````````````````````````````````````````````````````

The New Year approaches imperceptibly and inexorably, like a snow leopard, on soft white paws. However, unlike a beautiful but predatory animal, a cheerful winter holiday gives us positive, joyful emotions. Every hostess wants her house to sparkle for the New Year not only with cleanliness, but also with beautiful, stylish home decor.

In stores there is a huge selection of all kinds of decorations for the house or apartment. But you can decorate your home before the New Year and Christmas holidays with your own hands! For example, paper decorations for the New Year 2019 will transform your home and finally prepare it for a meeting of a cheerful magical holiday.

Do-it-yourself New Year's voluminous vytynanka

In fact, it is quite simple to create a great New Year's mood, both for yourself and your loved ones. It is enough just to have a desire and some items necessary for this.

Such openwork products as will decorate the room favorably, as well as a voluminous vytynanka or a composition of many of these can be presented to grandparents, colleagues, friends. Just a few hours of your time and a real winter fairy tale can appear on the window.

To create a volumetric vytynanka you will need:

printouts of a drawing for a vytynanka;
stationery sharp knife and cutting stand (you can take a regular cutting board;
glue.

Step 1. First of all, you need to print the selected template, of which there are just a dime a dozen on the Internet, on paper in two copies for each drawing.

Step 2 Put the printout on the board and, using a clerical knife, carefully cut out all the drawings along the contour of the future “holes”, leaving a little space for the “fastener” below the drawings.

Step 3 When all the drawings are cut out, make paper “fasteners” at the base of the models and fix them with glue as shown in the photo.

Step 4 From above, two parts of one paper craft just need to be glued together.

DIY Christmas paper snowflakes

There is probably no adult in the world who has never cut a snow-white snowflake out of paper in his life to decorate a window or a Christmas tree at home, a classroom or an assembly hall at school. And, indeed, do-it-yourself snowflakes are fast, cheap and incredibly beautiful way decorate the room for the New Year.

Our site has collected for you a small archive with templates Christmas snowflakes, which you can safely use and, if desired, make your own adjustments to the finished design. Snowflakes in the blink of an eye can create a fabulous New Year's atmosphere at home!

To create snowflakes you will need:

paper;
scissors;
fishing line or thread to hang (glue or tape to stick a snowflake to a wall or window glass).

Step 1. First, you need to cut a square out of paper. To do this, fold a sheet of any format diagonally so that the edges of the resulting triangle are perfectly connected to each other. Trim off the excess. Your snowflake will be the size of this square.

Step 2 To make a snowflake, the square must be folded diagonally, and the triangle in half several times. The more folds of the triangle, the more rays the snowflake will have. But, at the same time, the more times the triangle is bent, the more difficult it will be to cut out, due to the multi-layeredness of not too thin paper.

Step 3 Now transfer the drawing from the template (or your own drawing, relying on imagination and creativity) onto paper.

Step 4 Take sharp scissors and carefully cut out the pattern along the contour.

Step 5 Expand the snowflake and admire the result. You can hang!

Multi-colored paper garland for the nursery

A very unusual and original can be made with your own hands from colored paper of the brightest shades. If using templates geometric shapes, you can create wonderful layouts, from which it is then easy and simple to assemble a garland.

This interesting decoration will bring liveliness and colors to both the nursery and the common room, because the funny garland will lift the mood of both children and adults. Also, the garland can be hung on the Christmas tree as Christmas tree beads.

To make a paper garland you will need:

colored paper or colored cardboard;
pencil;
ruler;
scissors;
glue.

Step 1. Download templates of geometric shapes and print them on colored paper, or, armed with a ruler and a simple pencil (preferably with an eraser), make a drawing of three-dimensional geometric shapes, again, on colored paper or colored cardboard.

Step 2 With the help of scissors, you need to cut out each future geometric figure along the contour.

Step 3 Now glue the figures, not forgetting to stretch the thread in time so that when assembled, the garland thread remains inside the figure. The garland is ready!

The main guests of the holiday - Santa Claus and Snow Maiden made of paper

What New Year is complete without the kind wizard Grandfather Frost and his beautiful Snow Maiden? Even if you already have worthy figurines of these heroes winter holidays, which you put under the Christmas tree every year - hand-made symbols of the New Year will seem to you a much better solution. If there are no figures at all - there’s nothing to think about, arm yourself necessary tools, materials, a bit of imagination and diligence, and on the way - to create beauty!

For creating New Year's heroes You will need:

white paper;
red and blue cardboard;
compass;
rod from the handle;
pencil;
glue;
paints;
markers.

Father Frost

Step 1. Draw a circle on red cardstock and cut it out.

Step 2 Bend the circle in half and cut off half, and roll the cone from the semicircle and glue the edges.

Step 3 white paper should be cut into strips, which, in turn, you will need to cut into fringes on one side, a little more than half a strip.

Step 4 Give the fringe a "curl" look by wrapping it around the refill of a ballpoint pen.

Step 5 Cut out a small oval from white paper and draw the face of Santa Claus on it, then glue the oval just above the middle of the cone. If the quality of the paints allows you to draw directly on the figure, it will be even better.

Step 6 Now, with the help of chopped and twisted fringe, make Santa Claus a fur coat (by gluing the fringe to the base of the cone - this is the hem of grandfather's robe), beard, eyebrows and hat edge.

Step 7 Draw mittens, a hat for Santa Claus with paints and decorate a fur coat with a pattern. The fairy tale wizard that all children love is ready!

Snow Maiden

Step 1. Make a blue cardboard cone, using a semicircle slightly smaller than for Santa Claus, and, in addition, cut out a small semicircle for the kokoshnik.

Step 2 On a small semicircle, you need to make a small cut and bend the edges into different sides so that you can “put on” the kokoshnik on the Snow Maiden. Make the top of the future kokoshnik with scissors slightly similar to a church dome.

Step 3 Now glue the kokoshnik to the cone.

Step 4 Draw your beautiful face (you can directly on the cone, or you can also on a small oval of white paper), also draw a bang, and a braid in the back.

Step 5 Make curly fringes from white paper and, like Santa Claus, decorate a fur coat, decorate the collar and make snow-covered cilia.

Step 6 Paint the Snow Maiden with mittens and patterns for a fur coat and kokoshnik at your discretion. Granddaughter is ready!

Helpful Hints

To decorate a Christmas tree or a house, it is not necessary to buy a lot of toys and decorations.

If you have colored paper, cardboard, glue, and a few extra simple materials, you can create a huge number of Christmas crafts.

Here is just a small part paper crafts for the new year:

On our website you will also find:

What can be made of paper for the New Year: tube decoration

You will need:

2 sheets of cardstock in different colors or 2 sheets of scrapbooking paper

Scissors

PVA glue

Ring with chain attachment (optional)

1. From one sheet of cardboard, cut out 14 squares with a side of about 2.5 cm.

2. From the second sheet of cardboard, cut out 14 squares with a side of about 3 cm.

3. Start folding the opposite ends of the squares as shown in the image - one end on top of the other. In the place where the ends overlap each other, add a little glue.

4. Cut out a circle with a diameter of 5 cm from any sheet of cardboard. Mark its center.

5. Apply glue to the circle and start gluing the prepared tubes - first large tubes, and then small ones - they are glued on top of the large tubes.

* Try to glue the tube evenly to the tube.

* You may not need all the prepared tubes for crafting - this is normal.

* Glue a few rhinestones to the craft as additional decorations (this is not necessary).

6. Add a ribbon - it can be glued or threaded into a ring attached to the decoration.

DIY paper cones

You will need:

Colored paper or cardboard

Ruler and pencil

Scissors

PVA glue or pins

Styrofoam ball

* If you did not find a foam ball, then it can be replaced with a crumpled sheet of paper in the form of a ball, wrapped with a thread that secures the shape.

1. Cut out strips 2.5 cm thick from paper or cardboard.

2. Cut each strip across into small pieces 2.5 cm wide - you will get several squares.

3. Fold each square as shown in the image - make an arrow by bending the opposite ends.

4. Prepare the ball and start gluing (or pinning) paper blanks to it as shown in the image. Do everything in layers - first the bottom row, then move up, creating new rows.

5. Glue a ribbon to the top of the head so that the tree can be hung on the tree, and you can also add some artificial leaves as a decoration.

New Year paper crafts in quilling style

You will need:

Pages from old magazines or newspapers

PVA glue

Baking tins (optional)

Thread or braid and bead.

1. Cut out strips 4-5 cm wide from paper.

2. Fold each strip in half lengthwise. Unfold the strip and bend again, but this time each side to the center, and then the entire strip in half again (see image).

2. Prepare the glue and start twisting the strips into circles, adding a little glue so that they do not come apart.

3. Take another paper strip and bend it as in step 2. Prepare a baking dish (in this example, it is in the shape of a star) and put a paper strip into it, carefully laying it out inside the mold.

4. Now start laying out the twisted paper circles inside the molds. Apply glue to them so that all the circles are connected to each other and to the strip inside the mold.

4. When the glue dries, remove the blank from the mold. You can add more glue to make the workpiece even stronger.

5. Pass the thread or braid through the craft and add a bead for beauty. Tie a knot.

* For such crafts, you can use different molds, a heart, for example.

Wall decoration made of colored paper for the New Year

You will need:

10 paper plates

20 sheets of green paper

stapler

Double sided tape

Scissors

Cardboard decorations (can be cut from old postcards or drawn and cut)

White braid (optional).

1. Cut out large squares from green paper - one square from one sheet. The square should fit inside the paper plate. If necessary, reduce its size.

2. Fold each paper square like an accordion, and then in half.

3. Fasten the ends of the accordion folded in half to get a semicircle.

4. Repeat steps 1-3 with other paper.

5. Connect the two semicircles together with double-sided tape or a stapler to form a circle.

6. Using double-sided tape, attach the circle to the middle of the paper plate. Glue double-sided tape or apply glue to the back of the plate so that you can stick it to a wall or other surface (you can stick it to plywood, a wooden tablet, cardboard and then put it on a shelf or hang it on the wall).

7. Make 10 similar blanks.

8. Start making Christmas tree decorations. Cut out paper Christmas decorations and glue them together to form a circle. After making several circles (3-4 pieces), they can be glued to the plates, like Christmas decorations.

* You can add a white braid to the top of the Christmas tree, on which the Christmas tree supposedly hangs on the wall.

Christmas decorations made of paper: 3D paper droplet

INwe will need:

colored paper

Pencil

Scissors

1. Draw a large droplet on cardboard and cut it out.

2. Use the drop template to create a few more - place a cardboard drop on paper, trace and cut out.

3. Put a few drops into one stack, fold the stack in half and cut out a circle in the middle (see image).

4. Start gluing the sides of each drop to end up with one voluminous drop. In this example, it took 16 drops to make one voluminous, but more can be done.

* You can add thread or ribbon to hang the decoration on the Christmas tree.

Christmas paper toys: cone balls

You will need:

Paper (can be old magazines)

Scissors

Thread and needle

Double sided tape or glue.

1. Cut paper circles of the same diameter (choose any size)

2. Make a cut along the radius in each circle.

3. Make two cones from each circle - twist the paper from one and the other end (from the notch) to the middle, and fix the workpiece with glue or tape (see image).

4. Also make two cones from each of the remaining circles.

5. Prepare a thread with a needle and thread them through each blank so that in the end a ball is obtained from 10 blanks. Tie a knot.

6. Add string or ribbon to hang the toy on the Christmas tree.

How to make Christmas lanterns out of paper

You will need:

Stationery knife

Pencil and ruler

Thick colored or decorative paper

Needle and thread

1. Prepare a sheet of paper, fold it in half and cut it into two rectangles.

2. Lay one rectangle on a flat surface that can be cut. Using a clerical knife, make several transverse cuts from one end of the paper to the other - the distance between the cuts is the same, and they should lag about 1.5-2 cm from the edges.