Star News
Crochet hat pattern. Stylish crochet summer hats. The transition from the round part of the bottom to the crown
Handmade accessories are in trend today. Almost every fashionista has a summer hat, lace mittens or bactus in her arsenal, crocheted. On a hot summer day, you want to protect yourself from the scorching rays of the sun with a beautiful wide-brimmed hat. Such an accessory will definitely not go unnoticed, and if the hat is made with your own hands, then it will be an exclusive thing in a single copy.
Knitting steps
You can crochet a summer hat simply and quite quickly. The main thing is to understand the principle. The model can be concise, without unnecessary patterns and decorations, made with simple double crochets. And maybe openwork, with beautiful pattern and color transition, with the addition of additional decorations, ribbons or flowers. In any case, the process of knitting a hat consists of three main points:
- Knitting the bottom (this is a circle, the top of the hat).
- Knitting a crown (the part that covers the head, connecting the bottom and fields of the hat). This is the easiest step. Here you do not need to add or subtract loops.
- Knitting is the most beautiful part. They can be wide or very narrow, at the discretion of the needlewoman.
bottom
Before you start crocheting a summer hat for women, you need to measure the circumference of your head. On average, it will be 55-56 centimeters. This value will be necessary in order to calculate the diameter of the bottom that needs to be crocheted for a summer hat. If the head circumference is 55 cm, then the bottom diameter will be 17.5 cm. It is calculated simply by the formula: head girth / 3.14 = bottom diameter.
Now about how to tie it. As a pattern for crocheting the openwork bottom of a summer women's hat, you can take a pattern of any napkin. If there is no specific pattern or bottom pattern, then it is always knitted according to a certain principle (description by rows):
- Knit one air loop and make 12 columns with a crochet (or without a crochet, if desired) into it.
- This row will double the number of columns. From each existing column in the previous row, you need to knit 2 columns. As a result, there will be 24 of them.
- We alternate: we knit 1 column as it is, we double 1, that is, we knit 2 columns from 1 column of the previous row. As a result - 36.
- Now we knit 2 columns as is, double 1, knitting 2 columns from it. As a result, there will be 48 columns.
- We knit 3 columns as is, we double 1 to 60 columns in a row.
And so on until we reach the desired diameter of the bottom.
Here is one of the possible schemes.
Tula
Now the easiest step in crocheting summer hats. The crown is knitted in simple crochets or crochets without increasing or decreasing the number of loops. You can choose any pattern for the crown of a crocheted summer hat, and feel free to use it without changes. The main thing is that this pattern is in harmony with the fields and the bottom of the hat. The tulle should be knitted until the required depth of the cap is obtained.
fields
The fields are knitted for expansion. This is the most beautiful and interesting part of a summer crocheted women's hat. Here you can dream up by applying original patterns, make the fields wide or narrow, rounded or flounced. The expansion of the canvas is achieved by increasing the number of loops in each next row. They can be enlarged as much as you like. Wide brim summer hats are in fashion today.
For little beauties, sometimes you shouldn’t get carried away and knit rather voluminous fields, as it will be inconvenient for them to look out from under them, and you need to save your eyesight, and if you really want to be fashionable and the brim of the hat turned out to be wide, then on the one hand you can stab them up beautiful brooch or a flower.
Stylish crochet hat
To create this crochet summer hat model, you need to prepare a fairly thick beige color and a suitable hook size. It might be #3; 3.5. And some brown yarn for the lace.
The bottom and crown are knitted simply with double crochets according to the description given above. The fields must be knitted according to the following scheme.
Then you can twist the lace or braid it and tie it around the crown of the hat.
White crochet hat
For this model, you will need white cotton yarn and hook No. 3 or 3.5.
Here is an interesting detail - the bottom of the hat. It is knitted according to the pattern.
Repeat the last 2 rows of the pattern until the top of the cap reaches the desired depth.
Then you need to tie the brim of the hat. To do this, 9 rows are knitted with double crochets, and in each row 5 double crochets are evenly added. The edges can be tied either with a crustacean step or with simple single crochets.
Crochet openwork hat
For this openwork model, you will need light beige cotton yarn and hook No. 3 or 3.5.
The bottom is knitted according to the description given above, and the crown and fields are knitted according to the scheme.
When knitting fields, the number of rapports in the pattern increases by adding loops in the rows of double crochets.
The edges of the hat must be tied with a crustacean step and a fishing line threaded through them. hat can be decorated satin ribbon in tone, passing it between the columns of the last row of the crown, or with a ribbon of a contrasting color and leaving the descending ends.
Conclusion
A crocheted summer hat will always look fresh, interesting and stylish. It can be decorated at your discretion with ribbons, brooches, knitted or fabric flowers. You can knit a hat in any neutral color and, by changing accessories, complete it with any summer outfit.
It used to be customary to starch Panama hats and summer hats, but modern models do not provide for such a need. If you want the fields of the hat to stay even, then you can insert a special fishing line into them.
If it is necessary that the fields are twisted up, then firstly, they must be knitted as tightly as possible, and secondly, after the required width has been reached, several rows should be knitted without adding, and the last row should be reduced by 2-3 columns.
In general, fantasize! The knitting process itself can bring great pleasure, and with diligence and diligence, the result of the work will please not only the craftswoman herself, but also those around her.
An openwork summer hat with a wide brim is simply indispensable in the wardrobe of the fair sex at any age.
hat first
Knitting pattern
Crocheted summer hats are not only an occasion to do needlework, but also an opportunity to acquire a wonderful and useful thing for summer.
Second hat
Knitting patterns:
The hat will protect your head from the annoying and tiring sun, add tenderness and femininity to your image.
hat third
Knitting patterns
Crocheted summer hats are a comfortable headwear.
hat four
The skin of the face does not tolerate prolonged exposure to the sun.
hat fifth
You will need 200 g of yarn, some lurex and hook number 1
Tie the bottom with a diameter of 16 cm according to the scheme.
Then knit with a tulle 8 cm high.
And finish with fields 18 cm wide.
Tie the fields with Lurex according to the scheme.
Starch the hat and dry it into shape.
6. Original hat, made in one motif
With a knitted summer hat with a wide brim, you can protect your face from the scorching sun.
hat seventh
A wide-brimmed knitted summer hat is perfect for going to the beach or protecting from the scorching sun while walking around the city.
Hat eighth
Hat 9
Hat 10
Yarn Troitskaya Astra (610m/100g) 100% mercerized cotton.
It is knitted from above, a pancake approximately according to this pattern 
You can knit not 6 wedges with increments in each row, but 12 wedges, two increments in each wedge through the row.
Tula knit according to the scheme 
After the pattern, we knit the finishing strip for the ribbon.
Two rows * st.b.n., air *, in the second row of st.b.n. knit over the air of the previous row.
A row of CC2H columns, and two more rows * st.b.n., air *.
Fields of knitting CCH, 24 wedges, one increase per wedge.
Tie reguilin into the edge.
11. Hat knitted from 200 g of mixed ribbon yarn, hook No. 4, wire
diameter 1.5 mm Be sure to tie the sample.
Work begins with a bottom with a diameter of 15 cm.
Then they knit with a tulle 7 cm high according to the scheme.
And finish with fields.
To give a stiffness field, a wire is laid in the last row of columns without a crochet.
Two hats connected with one pattern:
.
Red hat. This extravagant hat is easy to knit. Even those who are just starting to master crocheting will be able to replenish their summer wardrobe with such an accessory.
Size 54-56.
You will need: 120 g x / 6 red yarn; hook number 2; wire with a diameter of 3 mm.
The dimensions of the product are shown in Fig. 8. Start working according to scheme 8, after the 8th row (the diameter of the bottom should be equal to
15 cm) knit 5 more rows straight without additions. Depending on the density of knitting, the number of rows with
increments can be increased or decreased. Next, perform 3 rows of RLS around the perimeter of the crown, then proceed
to binding fields. To expand, divide the circle into 8 parts and increase as shown in diagram 8 a.
Knit in this way until the brim is 21 cm wide. In order for the hat to keep its shape, it is necessary
when tying the fields along the edge next to the RLS, lay the wire along the working row and knit the RLS in the girth of the wire.
Decorate the finished hat with a brooch.
Here are collected schemes of beautiful openwork hats and color schemes for them. There is also material on how to starch and dry these hats.
 |
|
 |
 |
 |
 |
Threads - begonia, hook 2.1. 1 skein was enough.
I'll try to write how I knitted (from memory)
Tied a strip of fillet net(4 rows) - in a circle - the bandage turned out like this
Then she attached the thread and knitted the strip on top with a fillet. Tried on my daughter. The holes were large. I tied them with fans, but at the same time I corrected the pattern so that it did not expand, but vice versa
Fields:
When moving to the fields, I tied 1 row of ssn (I always knit 2-3 rows of sbn, but here I didn’t knit it and the hat doesn’t fit so tightly to the head - I did it intentionally so that the hat was freer at sea)
then 3 rows of arches from 5 c. P.
And then fans according to your favorite scheme 
Then she tied a double ring of regilin sbn, then with a crustacean step.
Hat “Little Lady”
schematic and description of the side part
The scheme of the bottom and crown on the exhaust gas 49-50 cm.
My yarn
My knitted 13 rows of bottoms:
Up to 13 rows inclusive for all sizes we knit the same way.
* * *
ATTENTION:
When knitting a pattern in those places where we stick the hook into the column, it is advisable to use the "deep" sticking method. The hook must be inserted not under the two upper half-loops of the column, but into the body of the column itself. This method will not allow the pattern to move when we knit with a crown.
* * *
Starting from the 15th row for all sizes, we knit according to the scheme. Rows 15-20 are repeated two more times.
From the 15-20th they differ only in the last row. Instead of CH, I knitted it with RLS.
33-38 rows are also knitted according to the scheme.
38th row - RLS in each column.
The fields start from the 39th row.
We finish the TULIA and insert the FIRST regelin equal to the circumference of the head. I did one vein. This is where we complete the work of the RLS. We steam.
We knit FIELDS hats.
In the 39th row we make increases in every 3rd column,
In the 45th row - in every 4th, in the 51st - in every 5th.
The point is that in each row with increases, you need to add 56 CH (7 reports). That is, in the 39th 168/56 \u003d 3, in the 45th (168 + 56) / 56 \u003d 4, etc.
FORTIFICATION OF THE FIELDS.
After the last row of fields is connected, they need to be steamed well.
On a horizontal table surface, the fields should be in the shape of a flat circle.
We take the SECOND regilin (two veins at once) and tie it with RLS. The length of regilin is not measured in advance !!! Just trim off the excess.
We straighten the fields well.
Steaming!
We tie the same row of RLS again. And we tie the last row with a "crustacean step" through a column.
On the plane, the fields should still have the shape of a flat circle.
Once again, steam the fields with an iron through a damp cloth !!!.
To stiffen, I used SALVITOSE, which is used in felting.
Dried on a balloon.
DECORATION.
It must be made removable - on a pin or button.
Daisies are very easy to knit.
Dial a chain of 2 c. n. In the first of them, knit 8 half-columns and close in a circle in the 1st half-column.
When the whole chamomile is ready, tie each petal in succession with connecting posts. This will allow them to keep their shape and not curl up.
For the centers of daisies, we make small pompoms using an ordinary table fork.
We wind the thread on the teeth of the fork. Then we tie with an additional thread in the middle, remove from the fork and tighten the knot. Then fluff and trim. Sew to the middle of the chamomile.
Two daisies are small, and one is slightly larger. For her, the scheme is the same, only for the petals we collect not 7, but 9 c. P.
I made a decoration on a button fastener for bags.
We need a button and a knitted circle - this is what daisies will be sewn to:
Finished:
Attach button to hat
Scheme (only for petals):
Notation: the sketched points on the diagram are the loop that is on the hook; the numbers in brackets are the number of loops that we pull out of the connected column (in order to make it easier to count the loops)
Blind (connecting) loop
I knit from Soso threads (50g = 240m) with an ordinary hook No. 1.5 (without a handle)
step by step photo process:
1. In a sliding loop we knit 6 columns without a crochet
tighten the thread, close in a circle.
2. Capturing only the back half of the loops, we knit 11 columns without a crochet (1 stbn in the first half and 2 stbn in the next), we connect in a circle.
Half loops of the smaller circle will be needed for the upper petals.
3. We knit arches for the lower petals: we collect 5 air loops (in. p), skip 3 loops of the circle, fasten to the fourth; repeat 2 more times, fasten the last arch into the loop with which the first arch was knitted.
4. We begin to knit the first lower petal: We collect 4 in. p. If you turn the knitting a little, the back (purl) jumpers will be visible
there is one loop on the hook (filled dot on the diagram), from the purl jumpers we pull out one loop at a time (4 sticks), we pull the last one from under the arch (extreme stick)
There should be 6 loops on the hook
5. We close the row: we grab the working thread and knit the loops on the hook in pairs (they grabbed the working thread, pulled it through 2 loops, grabbed the working thread, pulled it through the next 2 loops). We got the first row (connected column)
6. If you turn the knitting a little, the purl jumpers will be visible,
We knit one in. P.; we pull the loops from the wrong jumpers (1 on the hook + 5 from the jumpers + 1 from under the arch = 7 loops).
We close the row in pairs.
7. Next, we begin to cut the loops. In the sixth row, we start knitting with a blind loop (we insert the hook into the first jumper, grab the slave thread and pull it through the loop on the hook). from further jumpers we pull along the loop and the last one from under the arch
We close the row in pairs.
To finish the first lower petal, we knit a blind loop into each purl jumper, and one under the arch
We make one blind loop in the next arch and begin to knit the second lower petal in the same way as the first. After you tie all three arches, it will turn out like this
To go to the upper petals, do 1 c. n insert the hook into the half loop of the small circle and knit a blind loop
On a small circle, 3 arches from 4 c. p (2 arches for the petals and 1 for the core)
8. We dial 5 in. n and knit the first connection. upper lobe column
First top petal:
two petals
We tie the upper petals with single crochets (I laid a thin wire along the contour to keep their shape better). The lower petals were tied with stbn (without wire). It turned out like this
Sew on beads small beads, and admire
Starching caps
1. We wash the cap in warm water (30-40 degrees). For white hats, I use bleach. washing powder, for colored - powder for colored things.
2. Cooking starch. To do this, pour 2 tablespoons of starch into a bowl and dilute it with 1/2 cup of cold water (to avoid the formation of lumps). Then pour boiling water, about 1 - 1.5 liters, stirring constantly. The mixture should be thick and clear. We leave to cool.
3. Thoroughly starch the washed caps, wring out (without twisting), removing excess starch.
4. For drying hats, I use ordinary balloons, after inflating them to the desired size.
5. In the process of drying, I periodically give the fields desired shape, I iron the fields of openwork hats through a layer of fabric.
A hat is an integral part of the wardrobe of a modern woman, giving the image charm and sophistication. And in summer period openwork little thing will give joy to little fashionistas. Any mother can create an original headdress for her daughter. A crochet children's knitted hat, a diagram and a description of the work on which are offered below, will become a child's favorite accessory and a source of mother's pride.
summer lace
Crochet is conducive to creating light things. An openwork children's hat, made in light colors, will prevent the child from overheating in the heat, but at the same time will be able to protect from the sun.
First you need to choose the right yarn and hook. In this case, preference should be given to cotton threads.
The work uses:
- Yarn (cotton) in three colors: light green, white and grassy;
- Hook number 1.25.
For beginner needlewomen, the master class is equipped with a scheme for making a headdress, focusing on which, the work will go easier and faster.
Knitting begins with white yarn.
Six loops are cast on the hook, which are subsequently connected into a circle.
The next row consists of 15 double crochets, knitted through the initial ring.
In the third line, two double crochets are knitted into each loop.
Knitting continues with the alternation of one column with a crochet and one air loop.
From the fifth row, lettuce yarn is turned on. It is performed with double crochets, knitted into each loop without exception.
The sixth line repeats the fourth row: alternating air loops and double crochets. Next, the yarn changes to white. The seventh row is similar to the fifth.
In the eighth line, the alternation changes slightly: two air loops are performed between the double crochets. The ninth row is knitted in a grassy color. Solid double crochets are created.
In place of the air arches, three columns are knitted into each.
The next line repeats the drawing of the eighth row.
White yarn is introduced. A continuous row of double crochets continues, where the arches are worked out with two such columns.
On the twelfth and thirteenth row, the analogy of the eighth and tenth lines is preserved. The only difference is the color change: starting from the thirteenth row, light green comes into play.
The bottom of the hat is knitted until the desired diameter is reached.
In the process, it is worth trying on the product or focusing on the table of the ratio of the age of the child to the circumference of his head.
The table will also help you navigate the height of the hat. Knitting continues with the alternation of the last two rows and three colors, respectively.
When the height of the headdress is reached, a series of simple columns should be knitted.
It remains to deal with the brim of the hat. For them, a denser knitting is provided so that the headdress retains its intended shape. The fields are knitted with white yarn with single crochets. And gradually the number of loops should increase.
In the initial row, one additional column is knitted in every fifth loop. Further, several lines are drawn in continuous viscous.
Then two columns are introduced into every seventh loop. And again, the usual knitting of the columns is repeated.
With this technique, the hat fields are knitted to the required width. A few rows before the end, you can skip the grass-colored thread.
Hat fields are ironed.
Lightweight headwear for the summer is ready to use.
A knitted hat is far from a seasonal option, as many used to think. Thick yarn, appropriate hook and tight knitting can create a completely warm thing, for which even winter is not terrible.
It is clear that such a hat is not quite suitable for girls, since children's hats require a tighter fit in the cold season. But for women, a warm headdress with small brim can serve as a spectacular accessory.
In knitting a hat for autumn or winter, it is recommended to use yarn with the addition of wool. The headdress can be made using the single crochet technique, thereby achieving a tight knit. But to make such an accessory look decent, you should “play” with the color combination or add a cute brooch.
If you add a little variety to the drawing, then the hat will definitely not go unnoticed. Nice variant crochet headdress - the use of a relief facial column with a crochet.
In this case, the product will look connected by the now very fashionable gum technique.
Here are collected schemes of beautiful openwork hats and color schemes for them. There is also material on how to starch and dry these hats.
|
|
|
|
|
|
|
|
|
Threads - begonia, hook 2.1. 1 skein was enough.
I'll try to write how I knitted (from memory)
I tied a strip of sirloin mesh around the circumference of the head (4 rows) - in a circle - such a bandage turned out
Then she attached the thread and knitted the strip on top with a fillet. Tried on my daughter. The holes were large. I tied them with fans, but at the same time I corrected the pattern so that it did not expand, but vice versa
Fields:
When moving to the fields, I tied 1 row of ssn (I always knit 2-3 rows of sbn, but here I didn’t knit it and the hat doesn’t fit so tightly to the head - I did it intentionally so that the hat was freer at sea)
then 3 rows of arches from 5 c. P.
And then fans according to your favorite scheme
Then she tied a double ring of regilin sbn, then with a crustacean step.
Hat “Little Lady”
schematic and description of the side part
The scheme of the bottom and crown on the exhaust gas 49-50 cm.
My yarn
My knitted 13 rows of bottoms:
Up to 13 rows inclusive for all sizes we knit the same way.
* * *
ATTENTION:
When knitting a pattern in those places where we stick the hook into the column, it is advisable to use the "deep" sticking method. The hook must be inserted not under the two upper half-loops of the column, but into the body of the column itself. This method will not allow the pattern to move when we knit with a crown.
* * *
Starting from the 15th row for all sizes, we knit according to the scheme. Rows 15-20 are repeated two more times.
From the 15-20th they differ only in the last row. Instead of CH, I knitted it with RLS.
33-38 rows are also knitted according to the scheme.
38th row - RLS in each column.
The fields start from the 39th row.
We finish the TULIA and insert the FIRST regelin equal to the circumference of the head. I did one vein. This is where we complete the work of the RLS. We steam.
We knit FIELDS hats.
In the 39th row we make increases in every 3rd column,
In the 45th row - in every 4th, in the 51st - in every 5th.
The point is that in each row with increases, you need to add 56 CH (7 reports). That is, in the 39th 168/56 \u003d 3, in the 45th (168 + 56) / 56 \u003d 4, etc.
FORTIFICATION OF THE FIELDS.
After the last row of fields is connected, they need to be steamed well.
On a horizontal table surface, the fields should be in the shape of a flat circle.
We take the SECOND regilin (two veins at once) and tie it with RLS. The length of regilin is not measured in advance !!! Just trim off the excess.
We straighten the fields well.
Steaming!
We tie the same row of RLS again. And we tie the last row with a "crustacean step" through a column.
On the plane, the fields should still have the shape of a flat circle.
Once again, steam the fields with an iron through a damp cloth !!!.
To stiffen, I used SALVITOSE, which is used in felting.
Dried on a balloon.
DECORATION.
It must be made removable - on a pin or button.
Daisies are very easy to knit.
Dial a chain of 2 c. n. In the first of them, knit 8 half-columns and close in a circle in the 1st half-column.
When the whole chamomile is ready, tie each petal in succession with connecting posts. This will allow them to keep their shape and not curl up.
For the centers of daisies, we make small pompoms using an ordinary table fork.
We wind the thread on the teeth of the fork. Then we tie with an additional thread in the middle, remove from the fork and tighten the knot. Then fluff and trim. Sew to the middle of the chamomile.
Two daisies are small, and one is slightly larger. For her, the scheme is the same, only for the petals we collect not 7, but 9 c. P.
I made a decoration on a button fastener for bags.
We need a button and a knitted circle - this is what daisies will be sewn to:
Finished:
Attach button to hat
Scheme (only for petals):
Notation: the sketched points on the diagram are the loop that is on the hook; the numbers in brackets are the number of loops that we pull out of the connected column (in order to make it easier to count the loops)
Blind (connecting) loop
I knit from Soso threads (50g = 240m) with an ordinary hook No. 1.5 (without a handle)
Step by step photo of the process:
1. In a sliding loop we knit 6 columns without a crochet
tighten the thread, close in a circle.
2. Capturing only the back half of the loops, we knit 11 columns without a crochet (1 stbn in the first half and 2 stbn in the next), we connect in a circle.
Half loops of the smaller circle will be needed for the upper petals.
3. We knit arches for the lower petals: we collect 5 air loops (in. p), skip 3 loops of the circle, fasten to the fourth; repeat 2 more times, fasten the last arch into the loop with which the first arch was knitted.
4. We begin to knit the first lower petal: We collect 4 in. p. If you turn the knitting a little, the back (purl) jumpers will be visible
there is one loop on the hook (filled dot on the diagram), from the purl jumpers we pull out one loop at a time (4 sticks), we pull the last one from under the arch (extreme stick)
There should be 6 loops on the hook
5. We close the row: we grab the working thread and knit the loops on the hook in pairs (they grabbed the working thread, pulled it through 2 loops, grabbed the working thread, pulled it through the next 2 loops). We got the first row (connected column)
6. If you turn the knitting a little, the purl jumpers will be visible,
We knit one in. P.; we pull the loops from the wrong jumpers (1 on the hook + 5 from the jumpers + 1 from under the arch = 7 loops).
We close the row in pairs.
7. Next, we begin to cut the loops. In the sixth row, we start knitting with a blind loop (we insert the hook into the first jumper, grab the slave thread and pull it through the loop on the hook). from further jumpers we pull along the loop and the last one from under the arch
We close the row in pairs.
To finish the first lower petal, we knit a blind loop into each purl jumper, and one under the arch
We make one blind loop in the next arch and begin to knit the second lower petal in the same way as the first. After you tie all three arches, it will turn out like this
To go to the upper petals, do 1 c. n insert the hook into the half loop of the small circle and knit a blind loop
On a small circle, 3 arches from 4 c. p (2 arches for the petals and 1 for the core)
8. We dial 5 in. n and knit the first connection. upper lobe column
First top petal:
two petals
We tie the upper petals with single crochets (I laid a thin wire along the contour to keep their shape better). The lower petals were tied with stbn (without wire). It turned out like this
We sew on beads, you can use small beads, and admire
Starching caps
1. We wash the cap in warm water (30-40 degrees). For washing white hats, I use a bleaching detergent, for colored ones - a powder for colored things.
2. Cooking starch. To do this, pour 2 tablespoons of starch into a bowl and dilute it with 1/2 cup of cold water (to avoid the formation of lumps). Then pour boiling water, about 1 - 1.5 liters, stirring constantly. The mixture should be thick and clear. We leave to cool.
3. Thoroughly starch the washed caps, wring out (without twisting), removing excess starch.
4. For drying hats, I use ordinary balloons, after inflating them to the desired size.
5. In the process of drying, I periodically give the fields the desired shape, I iron the fields of openwork caps through a layer of fabric.
