Vases from threads with their own hands. We make balloons from threads and balloons. How to make a vase from a ball and thread. Step by step job description

A handmade vase made from threads is an easy-to-make and elegant souvenir. It can be made in two ways - on a balloon or using a solid frame. Even a child can master the process of creativity. The principle is based on the fact that the threads are wetted with glue, which then hardens. The structure hardens into the shape you gave it.

What you need

For the manufacture of the product you will need:

• Threads - knitting, floss, twine or even sewing. The thinner they are, the longer it will take to wrap the structure.
• Balloon. It's better to have several at once - suddenly something goes wrong.
• A plastic or glass container (if using a solid frame) on which the thread will be glued. The base must be wrapped with cling film.
• Stationery glue or potato starch paste. For strength, you can add a little PVA to it.
• Decor that depends only on your creative imagination. Lace trim, bows, flowers look cute and touching.

To attach decorative elements, it is convenient to use a glue gun with silicone.

Step-by-step instruction

The process of creating a vase is as follows:

1. The first step is to inflate the balloons. You can create quite large vases - the glued thread will keep the shape well. Naturally, the more the product is needed, the more the balloon inflates.
   
2. From a tube of glue, you need to build a structure through which the thread will pass, wetting with the composition. It will be convenient for someone to soak the whole skein in the mixture or come up with another way. It is important that the threads are fixed on the ball, and their entire mass is well saturated with glue.
   
3. After careful winding, the structure is sent to dry. It is better to do this in the sun, but you can use a battery or a hairdryer.
   
4. After all the threads have dried and the workpiece has hardened, you can remove the ball. First, the tail is cut off. Then the ball is pierced with a needle. You will hear how it hisses and crackles, gradually deflating and separating from the walls of the thread frame.
   
5. You can get the ball after the hole is cut. The frame cuts very well. You can give the vase any look - a shallow bowl, a spherical vase, a basket, a house with a window. From one oval blank, two products are obtained if the frame is cut in half.
   
6. After the hole is made and the ball is removed, it's time to decorate. You can decorate the surface of the vase with flowers, lace, fix butterflies or ladybugs on it.

To freshen up a familiar interior or decorate a house for the holidays, it is not necessary to make expensive purchases. Gossamer balls always look spectacular as pendants, craft items, christmas toys, vases and even chandeliers. Let's consider a simple way how you can make a ball out of thread and glue with your own hands.

The essence of making a gossamer craft lies in the technique of wrapping a ball shape with threads impregnated with an adhesive composition. The glue dries, the base is removed - the decoration is ready. Then the ball can be cut or decorated, combined into groups to create a composition, etc.

A few secrets to successfully making gossamer balls

In order to make a ball of thread, first of all, you need to choose the right materials: yarn, glue, shape, glue container, brush, and prepare the workplace.

There are a few simple rules to keep in mind:

1. The thinner the threads (for example, sewing), the faster and more likely the finished product is deformed. To avoid this, they should only be used for small balls (less than 8 cm in diameter). for crafts bigger size thicker threads are needed (mulina, yarn, twine, etc.), as they hold their shape better.
2. However, if you have to do volumetric decoration from thin threads, they should be applied quite tightly and, in addition to glue, be fixed additionally (for example, with hairspray or building clear varnish).
3. To make a gossamer ball, you need liquid glue. Suitable silicate and PVA. (sold in tubes) is more liquid, building (in cans) is thicker and therefore “holds stronger”. Secondary glue, like hot glue, is not good at all.
4. Dip the threads before serving on the form should be entirely. This can be done in two ways. In the first case, the thread will be dipped into the glue poured into an open container. In the second - go through the jar of glue, through the opposite holes at its bottom. The "correct" holes in the tube are slightly larger than the thickness of the thread (it is well wetted with glue), but the contents of the container do not flow onto the desktop.
5. No need to insert candles inside crafts or install in a room with high humidity. In the first case, the ball can easily catch fire, in the second case, it can lose its shape and “go soft”. In order not to abandon the idea of ​​​​installing lighting inside the ball, we advise you to choose LED bulbs based on batteries.

Detailed instructions for making balls of thread

Consider the whole process step by step. It is simple, and it can take only 15-20 minutes to get the first blank.

Step 1. Let's choose a base. For this, it is most often used Balloons different diameters or fingertips (sold in pharmacies) - for small crafts. They are good because at the end of the work they are easy to take out: pierce them and, after the air has escaped, get them through the gap without damaging the shape of the threads.

Harder bases: rubber balls and foam balls (used most often for topiary), are perfectly rounded than inflatable forms. But at the same time, they are more difficult to extract at the final stage.

Step 2 Let's prepare the form. The base, which will be tied with threads, should easily lag behind the adhesive layer of the product after drying. To do this, the entire form should be coated with petroleum jelly or oil (from a pharmacy), or liquid silicone (inexpensive, in small jars or in the form of a spray, which is much more expensive, can be purchased at sports equipment stores or auto cosmetics). It is better to remove excess lubricant with a napkin so that the yarn does not slip off the surface during operation.

Step 3 We wrap the base. Threads well moistened in glue are placed randomly on the ball. It is advisable to do this so that the threads do not intersect in one place more than 2 times. You should not stretch the winding too much (especially on an inflatable base), but nothing should sag either. In places where there is not enough glue, you need to additionally apply it with a brush.

Step 4 Drying. At this stage of work, you need to let the whole craft dry. To do this, it is desirable to hang it in a dry and warm place so that it does not touch any surface (it will not stick). Depending on the size, thickness of the winding and humidity, the product can dry up to two days. To get the finished result much faster, it is permissible to use a hair dryer.

Step 5 We take out the base. After the ball is completely dry, you need to remove it from its original shape. If this balloon, then it is usually pierced and removed through any suitable opening.

Step 6 We decorate. Any fairly light materials are suitable for decorating gossamer balls. These can be applications or inscriptions made of paper, beads, rhinestones, sequins, ribbons, etc. Balls collected in a group look spectacular. For example, for a New Year's wreath or garland.

The filling in balls will look beautiful: large beads, tinsel, serpentine, foil, confetti, etc. If necessary, the product can be painted. Aerosol paints are best for changing colors. With their help, it is easy to get shiny or matte gold and silver balls.

Advice! Hot glue is best for attaching jewelry: it is transparent, quickly hardens and gives a very strong connection.

Some interesting options for crafts from spider webs

A fairly dense ball of thread and glue can be used for topiary or other types of crafts. The main thing is that the fragile base can withstand additional decorative elements. Consider the technique of performing some of them.

Snowman

You will need:

• three different-sized balls of white (or blue) yarn,
• eye buttons,
• orange paper nose cone
• branches for hands
• round pieces of cotton for legs,

To assemble a pyramid of balls - a blank for a future toy - you need to lightly press on larger ball on both sides to make neat dents. Glue a medium-sized ball to one of them, and place the other on the work surface. The third part (head) is also attached.

All remaining parts are glued to the finished base. At the end, you can tie a bright yarn scarf.

Advice! To make even dents on the ball, lightly moisten this place with a wet brush.

Topiary - "tree of happiness"

For its manufacture you need:

• one ball ("crown" of the tree),
• a small pot with filler (pebbles, coffee beans, beads, etc.) to “plant” our “plant”,
• wooden or wire stick for the "trunk",
• glue,
• ornaments ("leaves" and "flowers").

Making a topiary is not so difficult: just assemble the frame (attach the ball to the stick), place the “trunk” in the pot, fill it with filler and decorate.

Most often, crepe paper flowers, bows made of satin ribbons, coffee beans, beads, quilling paper strips and much more. All this is attached to hot glue with a gun.

Flowers

Making them is very easy. All that is needed is to cut the petals around the diameter of the ball with cloves. From one ball, 2 identical blanks are obtained. Flowers can be decorated with beads, beads, "stamens" made of wire, etc.

Birds, animals

Since such crafts are very simple, they are great for competitions in kindergarten or to decorate the Christmas tree. For their manufacture, paper blanks of “wings”, “paws”, “tails”, “tufts”, etc. are needed, which are glued to the “trunk” - a ball of thread.

Vase or bowl

To get a vase or a deep plate from a gossamer ball, you need to carefully cut it in half. For the bottom, you need to slightly moisten the bottom and press it inward. When the product dries again, it will retain the desired shape.

To make the hemisphere of threads stronger, it is recommended to cover it on both sides colorless varnish. True, it will be possible to use such an item only for decorative purposes: it will not withstand moisture and a significant load. But at the same time it will become a highlight of any interior.

Helpful Hints

If you want to decorate the interior, then start with a simple craft, such as a vase, which can be made from old plastic or glass bottles using paper, twigs, tubes, newspapers and magazines, and many other materials.

There are a huge number of master classes for making vases with your own hands.

One of the most interesting and at the same time quite simple vases you can find here.

DIY paper vase. A kaleidoscope of flowers.

An ordinary glass jar or bottle can be turned into a colorful vase. To do this, you just need to glue the container with small pieces. corrugated paper different colors.

It is better to use a transparent glass container, and for gluing paper, either special decoupage glue or regular PVA glue will help you, which must be diluted with water in a ratio of 1: 1.

Weave the bottom of the vase:

Make 4 bundles of 4 bundles

Fold all the harnesses crosswise

In turn, "run" each tourniquet in a circle so that it wraps around the rest of the tourniquets

The first 3 rows are woven in the same way. After that, four bundles need to be divided in pairs and weave 3 more rows in a familiar way - you should already have 6 rows of weaving

Wrap each bundle separately to get this bottom:

3. Weave the walls of the floor vase:

Protruding paper tubes need to be bent up

Start braiding each tube - you should have formed a vase leg

Prepare a pot lid or any other disk-shaped object wider than the bottom of the vase

Insert the lid between the stacks of paper tubes

* The lower the lid, the wider the vase will be.

Using the already familiar technique, you need to weave another 10 rows

Now you need to start bringing together the edges of the racks - we are preparing the neck of the vase

The neck of the vase needs to be braided until you reach the stage when you will need to braid two racks instead of one.

Now again spread the bundles to the sides and start weaving the border of the vase

In turn, begin to bend one rack after another

A house or apartment will look, seem or be perceived much more comfortable if you add a few do-it-yourself elements to the decor of the premises.
After all, we all know for sure that everything that is done by hand, with soul, keeps the warmth of the master and, accordingly, looks much more interesting than soulless, serial, stamped compositions.
Today, we will review step by step process decorating a vase - with the most common threads. So, how to make a vase of threads? Master Class.
For work, you need to prepare the following items: a transparent glass vase (a tall glass or a jar of pickles), a disposable cup, a spool of thread, a stationery knife (or scissors), PVA glue, rhinestones, ribbon, a metal tag (optional, optional).


We take a disposable cup, with scissors, an awl or a needle we make two through holes from below (as in the photo).


We thread a thread into the holes formed, with which we will later decorate the vase. Then here, in a glass with a thread, pour PVA glue.

We begin to carefully wind the sewing threads on a glass vase. We wind in random order, freely crossing already pasted threads.

This is what a vase should look like, completely wrapped in threads. Next, the workpiece must be left for about a day, until the glue dries completely.


After the specified time has passed and the adhesive threads have completely dried, we tie the neck of the vase with any ribbon that matches the color.


In addition, the vase can be additionally decorated by sticking beautiful, shimmering rhinestones on its front part.


Now back to the ribbon, you can tie it with a single or double bow, or you can leave a simple knot. Our vase is tied with a bow with a metal tag with rhinestones (sold in sewing studios). And a white heart is pasted on the bow itself, also with a strazik.


Well, now we can sum up: we answered the question of how to make a vase from threads and showed clearly how to make it.




As a result, we got a small, exclusive, blue vase (20 cm high), decorated with threads and rhinestones, which wonderfully complements the interior, giving warmth and positive emotions!

Bright vase of threads with your own hands

Bright vase made of threads. Photo

We present an excellent master class on creating a bright vase from the remnants of threads of various colors. The process of creating from scraps of thread can be quite simple, so even a child can be involved in this process.

To create a vase of threads, you will need the following materials:

Remains of yarn of various colors;

The shape you want to repeat: vase, ball, etc.

Foil;

- ½ cup flour;

2 tbsp. hot water;

2 tbsp. cold water;

3 art. l. Sahara

The process of creating a vase of threads:

Glue paste preparation

Mix in a bowl 2 tbsp. cold water and ½ cup flour. Boil 2 cups of water in a saucepan and pour in the well-mixed flour-water mixture. Bring the mass to a boil and remove from the stove. Next, add 3 tablespoons of sugar there. Leave the paste to cool slightly, and as it cools it should thicken a little.

Creating a vase - gluing threads

Pick a suitable glass container in the shape you want the thread vase to be. Top it with foil. Take the rest of the thread and soak it in the glue paste. Next, well-impregnated threads must be arranged in random order over the entire surface of the vase. Leave until completely dry.

After that, you need to carefully remove the multi-colored base from the glass vase and eliminate the remnants of the foil. An airy light vase of knitting threads is almost ready.

But you shouldn't stop there. With this technique, you can create various crafts for interior decor, for example, you can create balls of multi-colored threads. If you make several balls and tie them together, you get a snowman for decorating a New Year's interior or as a gift. You can also involve children in this process, for whom the process will bring a lot of pleasure!