Do-it-yourself cardboard hat step by step. How to make a beautiful hat with your own hands - types, photo ideas, step by step instructions. Step by step instructions with photo

Do not think that only ordinary crafts or toys can be made from paper. There are many ways to work with this material. Today we will look at a useful topic, how to make a paper hat without a lot of time and with a minimum of effort.

Newspaper painter's hat

This is a product familiar from childhood. Outwardly, such a hat resembles a cocked hat of pirates. It is quite possible that when you learn how to make a paper hat for a painter, you will put in a little effort, bring it to perfection and make it the main attribute of a pirate carnival costume.

Let's go back to the main purpose of this hat. Why is a hat classified as a painting job? In the process of refining the premises inside or outside, dyes can get on the hair, if there is no special hat, then this one is quite suitable. You give a second life old newspaper, and throwing away the product after use is not so pitiful.

Convinced of the usefulness of this product? Let's learn how to make a paper hat for a painter. For work you will need a newspaper sheet, choose a larger size. A1 format is ideal.

Stages of work:

That's the whole instruction on how to make a paper hat. You can sample the finished product. The work is simple and takes a few minutes, and with experience even less.

Cardboard carnival hat

Carnival coming soon? Will your child be dressed as a magician or a gentleman from London? Or maybe it will be a real lady who cannot go out without an elegant miniature hat? Then you must definitely learn how to make a paper cylinder hat. Of course, ordinary paper is not suitable for this work. The material should be denser, it is better to use cardboard.

What else is required for this work:

• the main material (cardboard) we select the color for the theme of the future costume;
• pencil for marking;
• adhesive tape;
• fleece;
• to create a beautiful overflow of varnish and a wide brush.

Before you make a paper hat with your own hands according to the instructions, you need to prepare for the upcoming work. It is impossible to make a top hat without measurements, of course, if it is not a miniature hat for decorating hair.

You are required to:

• measure the circumference of the child's head with a sewing meter;
• think over what height of the finished product you need, it is not recommended to make a very high cylinder, it can cause discomfort when worn.

Now we will explain step by step how to make a paper hat with your own hands:

For a spectacular result, cover the cylinder with varnish and leave to dry completely. Now you know how to make a paper cylinder hat with your own hands. But this option is suitable for little gentlemen, but what about ladies?

Small elegant top hat for girls

The following site instructions will tell you how to make a hat out of paper, which will decorate any holiday outfit. It is attached to the hair with hairpins or a hoop. This accessory can be used not only by children, but also by adult girls. Such mini cylinders can become good decision for photo shoots.

Prepare before work:

• thick cardboard;
• rod glue and gun;
• ruler;
• corrugated paper;
• quilling paper;
• braid;
• scissors.

Before manufacturing, as in the previous version of the cylinder, we need to determine the dimensions. There is no need to measure the circumference of the child’s head, the work can be done “by eye”. For those who are engaged in such creativity for the first time, we recommend using standard sizes, we will indicate them in the course of work.

And now the instruction itself on how to make a miniature paper hat:

Externally, the cylinder may appear ready. It needs to be decorated. We use corrugated paper and quilling technique. After practice, you can surrender to fantasy.

1. Cut out a circle from paper, it should be smaller than the base, apply it to the hat. We wrap the excess part inward and fix it with core glue. We decorate the top of the mini cylinder with braid;
2. We make flowers. Use paper that matches the color of the hat. Wrap the strips with a special stick. Form flowers. Do the same for the leaves. We glue the resulting products to the cylinder.
3. To prevent the finished accessory from falling off your head, attach it to the hoop, you can use an elastic band or braid.

This is just an example of the work, you can make the product any, with larger or smaller margins and decorated as you wish.

Cap in technology

So, you have already learned how to make a paper hat for painting, how to make a carnival top hat. Now consider another product that is made using the origami technique - this is a cap.

Such a thing is indispensable both for outdoor recreation and in the country while working under the scorching sun, and children will simply be delighted with such an attribute.

There are several manufacturing options. We will consider each of them.

classic cap

Let's start with classical model. To work, you need a square sheet, preferably with big size. Let's start adding:

1. Fold the square into a triangle. We do this at a 45 degree angle.
2. We turn the workpiece towards us with a wide part. The corner located at the top, bend down the formed figure.
3. Now the folded corner needs to be lifted. Elements located on the side must be placed on top of each other and pressed to the top of the product. The resulting figure should remind you of a trapezoid.
4. Lower one of the parts, which is located at the top of the corner side, and tuck it under the previously folded layers. Press the workpiece as hard as possible so that everything is securely fastened.
5. We turn the product. Fold the rest of the corner down. We unfold the workpiece from top to bottom. Open the product so that the inside of the cap appears.
6. Gently press on the sides of the product to give them shape. We lay the details on top so that the outlines of the cap appear. The corners should "look" at each other.
7. At the final stage, you need to make a visor. Roll it up first. Then return to the starting position. When doing these steps, leave a few centimeters from the bent line.

Perhaps the instruction on how to make a hat out of paper according to this principle will seem complicated. Not everyone succeeds in designing a product the first time, because the origami technique requires practice. But we are sure that already for the second time, you will get a great cap, which will take you a few minutes to create in the future.

square cap

Do you want not just a paper hat, but an original cap? There is nothing easier, let's design a square cap model. What should be done:

• take a sheet of paper, you can newspaper;
• fold the sheet forming a triangle, cut off the excess;
• expand the resulting figure, you should have a line passing through the square;
• fold the workpiece, on the other hand, for the second fold line;
• turn the product upside down;
• we lay each of the corners down;
• turn the product over and repeat the steps;
• if everything was done correctly, you should get a visor, bend it up;
• the last thing you need to do is bend the corners and secure the shape of the cap.

Nothing difficult. Now you are the happy owner of not a simple, but a homemade paper cap. According to this scheme, even children can be taught to make hats. They will definitely love this job.

You can sew such a hat with your own hands without any pattern.
The fact is that such a hat is sewn in a spiral. It can even be sewn from elastic braid or, like mine, from strips of any fabric, cut along the bias.
The advantage of this model is also the fact that you yourself can form just such a length and waviness of the hat fields that will suit you, your type of face.
So, we need cotton fabric (I needed 1 meter with a fabric width of 150 cm).
I note that if you want the brim of your hat to be bigger and wider, then take this into account when buying fabric, take a little more.

PREPARATION OF THE BIAS INLINE FROM FABRIC

First, we need to cut the fabric along an oblique strip 6 cm wide.

Now you need to connect all these stripes into one long ribbon.
Moreover, as you can see, the edges of the strips turn out to be cut off by 45-degree corners, so we connect them also along an oblique, as in the photo.
If for someone the connection of the oblique inlay is difficult, then you can simply cut these corners at 90 degrees and connect the strips in the usual way, across. True, in this case, the total length of the strip will noticeably decrease, do not forget to take this into account when buying fabric.
We sweep or chop off individual strips with needles, sew on a typewriter.

We should get one long strip with such oblique seams as you see in the next photo. Smooth out the seams. Fold the strip in half and iron.

We need to slightly round off one edge of the strip, literally the initial 30-40 cm.
This is necessary so that the bottom of the hat lies better, more flat.
To do this, you need to slightly stretch and round the strip when ironing.

Our strip - the workpiece is ready. It remains to process the open cut (zigzag on a sewing machine, the protruding corners of the fabric need to be cut off), and you can take on the formation of a hat.

FORMING THE HAT

We start from the bottom. In a spiral, we begin to build circles.
The meaning of the work is that the result should be a flat circle. If you, increasing the next turn, see that your strip is bent down and curved, then make a small pinch.
For those who crochet, this procedure will not present any difficulty at all.
As a result, we get a snail outlet. 17 centimeters in diameter.
It will, however, be better if you take some kind of panama hat or flat-bottomed hat (not a baseball cap) and start applying it from time to time, comparing. So you will be sure that the hat will sit well on you.

I also note that if you do not often sew on a typewriter, then it is better to sew this circle by hand (then you can lay a line on top of the hand stitches), it will turn out more accurately.

Now we move to the sewing machine. We need to sew a pipe.
That is, now we just continue to sew our strip in a spiral, but without adding anything and without making tucks.
The strip will begin to bend and we will get a pipe.
It is desirable that your sewing machine the sleeve was removed, so sewing is much more convenient.

In height, we need to add about 9 cm in this way (interrupt for fitting).

Now we have a cap and you can fully indulge in the design of the type of hat. As you understand, we are starting to form the fields.
To do this, we again need to expand the structure with small tucks. If you lay a lot of pintucks, the fields will be more wavy.
The length of the fields is also up to you. Experiment!

I will only note that when finishing the fields, we need to gradually reduce the band to nothing. By the way, I (in the last photo) did not do it very well. :)
The last row is obtained evenly folded in half with a strip.
Now it all needs to be ironed out carefully. That's it, you're done!

SOME TIPS

You can sew a hat according to the same principle, but in a more playful version. Here's how it looks in the photo from the magazine "MOD" No. 425.

The difference is that we do not process the cut of our strip, but on the contrary, we put it on public display! We sew a hat with a raw cut outward, and then further ruffle it.
I think that in order to make the fringe wider, you need to initially cut the strip not 6 cm wide, but more, 7-8 cm. You can sew the strips together in a zigzag, in order to simultaneously stop the further "spreading" of the fringe. You can first zig-zag the entire strip, stepping back a couple of centimeters from the edge (the length of the future fringe), and then sew the hat. So you are guaranteed to get a fringe of the same length.
If you take denim, then when you ruffle the fringe, it will be different in color, and it will look even more interesting (please note that with denim because of its thickness it is quite difficult to work).
You can even sew such a hat from used clothes or remnants of fabric.
Good luck!

It is very easy to make such a headdress as a hat out of paper! Making this craft will not take much of your time. In addition, a child can be attached to such a fun process.

To make a hat out of paper, we need the following materials and a few tools:

• dense colored paper or cardboard (any shade);
• scissors;
• glue stick or ordinary PVA;
• decorative tape;
• satin ribbon rose.

From a sheet of colored cardboard (A4 format), you need to cut a circle.

A circle can be made with a compass by circling any, round shape, subject, or create a freehand sketch, as in this case. Next, the center of the circle must be cut out.

The size of the hole should be small, as in the photo. Leave the cut out part, we will need it to create the upper part of the hat.

Make a cut on either side of the workpiece.

Apply glue to the back of the workpiece.

Now glue the cut and wait a bit until the glue dries and the workpiece is securely fixed.

The fields of our hat have acquired the necessary shape.

While the glue dries, we need to cut out a strip from cardboard (you can have a different shade).

Make small notches along its edges.

Then bend them, lift them up on one side and down on the other.

Leave this part until the glue is completely dry. After, we apply glue to the bottom of the workpiece.

Now we pass it through the hole and glue the hats to the brim.

Here's what should happen.

If necessary, the edges can be trimmed by cutting off excess cardboard. Now you can start decorating crafts. Attach a decorative, thin ribbon to the base of the hat, making a few turns.

Attach its tip with glue. In the same way, attach it to upper part hats.

First, attach a bow to the craft.

Now, in the center of the bow, glue the rose.

That's it, the paper hat is ready!

The final look of the craft. Photo 1.

The final look of the craft. Photo 2.

The final look of the craft. Photo 3.

The final look of the craft. Photo 4.

As you can see, making a paper hat with your own hands is not difficult at all!

A hat made by yourself out of paper can be a great addition. baby costume for a holiday at school or just a favorite hobby for teenagers and adults. For such a craft, no special additional materials are required, and it is also easy to perform, accessible even to those who have never done origami or other paper things before.

In addition, there is several types to make a hat out of paper, which allows you to choose the shape and instructions, which is perfect for you. A hat can be folded even from an unnecessary newspaper in a matter of minutes, so you can try yourself in this venture immediately after reading the article.

So, how to make a hat out of paper and what else is needed for this?

To begin with, consider the option from the newspaper, which is within the power of absolutely everyone and does not take much time.

The advantage of newspaper as a material for a hat is that it is quite large in size and also folds easily, unlike other thick paper. More often they make a paper hat for boys, it is needed for fishing or a picnic (below is a diagram).

The first thing to do is lay out a whole sheet of newspaper (two pages) on the table. Then fold it along the already existing fold, and then fold it in half so that you get a rectangle. This is necessary so that another even fold appears in the middle of the page.

It will come in handy later, when you need to bend one corner exactly to the middle, so that an unfinished triangle is formed. The second upper corner is bent in the same way.

Here are 2 options for diagrams of how to fold a newspaper:

So, we got two diagonal cuts. Now you can bend the bottom edge by 5-7 centimeters.

Important! Please note that only one edge is folded at this stage, that is, the end of one of the two pages folded together. If you make a mistake at this stage, the whole craft will be spoiled and you will have to spend time and a new newspaper page to redo everything from the very beginning.

The second end is bent in the same way, but on the opposite side. It is important to ensure that they are bent at the same distance, otherwise the hat will turn out to be disproportionate and ugly.

When these manipulations are completed, you can tuck the lower ends from the edges, also by 5-7 centimeters. It is best to secure them with tape so that the hat does not fall apart immediately after you unfold it.

This work is over, the hat can be unfolded and put on the head. The original thing is ready!

From paper

If you want the craft to be more durable, as well as more believable, then you can make a hat with paper brim. Children will surely like it, and they will want to quickly go for a walk in it.

Despite the fact that here the technology is a little more complicated, it does not require additional materials and is quite feasible if you follow all the instructions clearly.

From a sheet of paper you need to fold the correct square. Then it folds diagonally and in half twice to make the necessary markings that will be needed for further actions.

After that, you need to return the paper to the state of the square folded in half. The edges are bent inward without connecting the folds along the edges. After that, the folds are opened and pressed for the most satisfactory result.

It remains only to turn the craft over and bend the edges, and then the sides towards you, using the markings that were prepared in advance.

Important! Such a hat can also be made from a newspaper, the material does not matter. Even cardboard will do, but keep in mind that it folds more difficult.

With visor

Surely many will be interested in how to make a hat with a visor, that is, a real cap. It will come in handy on a hot day when there is nothing else at hand that could protect the eyes and head from the sun, and its implementation will not take much time.

A sheet of paper or newspaper should be bent at the "closed" corners, tucking the bottom edge outward twice. On the other hand, special corners are made that will fix the current position of the paper, after which the planes should be bent towards you, taking into account the size of the future cap.

Important! When making any hat, you need to be careful with the dimensions - of course, if it's just a hobby, then nothing bad will happen if the product is too small or large. When a hat is made for a child to play with, it can be extremely upsetting that the cap does not fit over the head. Instead of redoing a thing, you can immediately calculate the parameters at least by eye.

The lower end now needs to be bent along the edges, and from it to form peculiar understudy corners, which are subsequently wrapped inside the craft. Turn the future hat over and fold the larger corner to the bottom edge, tucking it into the “side”, like the side corners.

After that, you can straighten the original hat with a visor and put it on your head, forgetting about the harmful sunlight.

From cardboard

Cardboard is a very dense material, so you can make a real cylinder hat out of it, which will not lose its shape and will be a great gift for a child.

For this model, you will need several additional tools: wire, glue, scissors and, if desired, decorative elements - beads, ribbons or something else.

It will be very important to measure the circumference of the head in advance, because the cardboard will not be able to stretch like the same newspaper.

On cardboard, you need to draw a circle equal to the diameter of the circumference of the head, and also cut off the wire of the same size. Stepping back a few centimeters from the circle, draw the fields for the future hat. According to the size of the smaller circle, a cardboard rectangle is made, which is then bent into a circle and fixed with glue or a glue gun.

A small circle needs to be glued on top of this resulting circle.

A kind of frame for a hat is ready, you can leave it straight or glue it with a cloth and add a few decorating details.

Such a hat looks believable and beautiful, so it is useful not only for children's games, but also for various masquerades or even craft contests.

Corrugated paper

Another ingenious option - This sports cap made from corrugated paper . First, a sheet of paper is folded in half, and then smoothed again, after which a strip of non-liquid glue is applied under the fold. A tape of cardboard or any thick paper is placed on it so that a little corrugated paper remains around the edges. These edges need to be bent along the sides of the tape and glued to it.

Then you will need to cut a small ribbon from another sheet of corrugated paper and apply another strip of glue to its edge. It is glued to the first sheet so that the edge of the base coincides with the edge of the tape, which does not have glue on it. The bottom edge of the first sheet is folded over, and another strip of paper is glued to it. Then a kind of fringe is made with scissors.

Now along the lower edge of the product, a fold is formed - the edge is wrapped up. In the area of ​​\u200b\u200bthis fold, it is carefully glued together or fastened with a stapler. After that, you need to put the hat on your head, and collect the upper part in a bun and fasten it - grab it with a cord, and fluff the fringe. Decorating elements are added as desired. The hat is ready!

Now you know many ways to make a paper hat for every taste and skill level.

Hand-made hats from improvised materials are an original accessory for a fancy dress, a holiday in kindergarten, on wedding ceremony, Halloween, New Year celebration. After all, in different time years, they are relevant and in demand in everyday life and in stage images.

How to make a hat from improvised material?

Creating such an addition to the outfit is not difficult. For a small hat you will need:

• a piece of felt of any color;
• thick needle;
• bobbin threads;
• scissors;
• marker;
• knitted lace or lace fabric;
• beads;
• hair hoop;
• drill;
• a small piece of mesh;
• glue;
• feather.

Step-by-step instruction for making a hat with your own hands from improvised material - felt:

1. Take the source material and draw two circles, the diameter of which is respectively 3 cm and 7 cm (for a larger hat, you will need to increase the size).
2. Draw a rectangle with a length equal to the circumference of the small circle. It can be calculated as follows: 2x3.14x1.5. The width of the rectangle will be equal to the height of the hat.
3. Roll the strip into a ring and sew the ends together.
4. Attach a small circle on top and sew.
5. Attach a large circle to the bottom of the cylinder, placing it strictly in the center.
6. Sew lace or fabric around the cylinder.
7. Decorate the bottom of the hat with beads.
8. Make two small holes in the hoop and sew it to the base of the product.
9. Fold the mesh in half and tighten the edges with a thread.
10. Attach the resulting veil to the hat with stitches and stick the feather.

paper hat

Using simple tricks and unpretentious tools, you can create exceptional accessories for the holidays at home, in kindergarten and school from a sheet of whatman paper. To make a paper hat you will need:

• paper sheet;
• pencil, ruler, compasses;
• glue;
• tailor's meter;
• finishing material: flowers, braid, ribbons.

Step-by-step instruction:

1. Measure the circumference of the head, let it be 56 cm, and the fields - 14 cm.
2. Cut out a rectangle 56 cm long and 12 cm wide from paper (the height of the crown, it can be different if desired). Add from three sides (two lengths and width) 1 cm for gluing. On both sides along the length, make cuts on the allowances and bend them.
3. Draw two circles with a common center and radii: 56/2 x 3.14 = 8.9 cm, you can approximately take 10 cm - the radius of the first circle. This is the top of the hat; 10 + 14 \u003d 24 cm - the radius of the second circle.
4. Cut out the top of the hat.
5. The rest is fields. To give shape, cut out a small sector and make a 1 cm valve, spread it with glue and press it.
6. Lubricate the inner edge of the fields with glue and attach to the crown. Glue the crown, if it turns out to be too long, then it is cut off.
7. Glue the top of the hat to the crown. To do this, grease all the valves with glue and put a circle of a smaller radius on them. Turn the hat over, press the valves and hold for a while.

The paper hat is ready, it remains to decorate it. Here you have to be imaginative. In order to hide possible defects, stick a tape along the edge of the fields, the top and bottom of the crown. You can attach flowers or make a bow, decorate with sparkles, paint patterns, tie ribbons. It is also appropriate to use beads and beads.

autumn hat

This headpiece is perfect for autumn holiday which are often arranged at school. At this time, there are just a lot of fallen leaves and it will not be difficult to collect material, you can even choose the right color.

To make a leaf hat you will need:

• scissors or secateurs;
• awl;
• fresh autumn leaves.

Order of execution:

1. Trim the ends of the stems.
2. Take two leaves and fold them in half.
3. With a stem of one of them, pierce the other, as if to sew one stitch.
4. Spread the leaves in a circle, piercing each to the stem of the previous one.
5. To decorate the top of the hat along the edge, you need to make tucks, as on fabric. For this, it is better to use an awl, since the layer of leaves turned out to be thick. Insert the stem torn from the leaf into the hole. The stitch will require a second hole where the other part of the stem is inserted. Their ends will be inside leaf hats. Got the crown of the hat. You can end there.
6. For fields, again continue to make punctures with leaf stalks, folding them in half, as we started. So continue until you get the fields of the desired size.

The hat is made larger if it will not be used immediately. It will shrink as it dries. It should be noted that glue and paper clips are not needed in its manufacture. Leaves are attached only by stems.

Preparing to make a straw hat

One of the most fascinating crafts is straw weaving. This unique natural material has always been in the price of the masters. In terms of its qualities, it surpasses all synthetic ones. In autumn, when crops have already been harvested, straw remains on the fields. It is collected, sorted by length and diameter, dried. Before weaving the hat, the raw materials are soaked in water for 0.5 hours and wrapped in a film. From it weave 25 meters of ribbon, which is called catfish or four-ended. They do it like this:

1. Take two straws. One is placed horizontally (straw 2), and the other (straw 1) at an angle of 60 degrees to it.
2. They circle the first around the second.
3. Bend one end of the second to the left, and the other to the right and put it under the straw 1.
4. The end of straw 1, located on the right, is bent to the left, and the other, which is on the left, is bent to the right and slipped under straw 2.

Repeat weaving in the same sequence.

straw hat

The straw ribbon is woven, and you can proceed to making a hat with your own hands from the material at hand, which is straw.

For further work you will need:

• sewing needle;
• threads;
• iron.

Step instruction:

1. Twist the finished tape into a roll.
2. Bend its tail in the shape of a triangle and put the next row under it.
3. Sew rows with thread. When sewing, thread the needle into the tooth.
4. Then work in a circle, placing each row under the previous one and sewing.
5. The bottom for an adult is 20 cm, and for a child - from 13 to 18 cm.
6. Then every four rows of sewn tape roll out with a rolling pin.
7. Iron the finished tulle with the hottest possible iron.
8. Bend the tape in half in width and lay out the first row of fields.
9. Perform work to the required margin width.

After finishing work, iron the product and decorate as desired: with ribbons, flowers, beads.

Conclusion

Handmade hats are always relevant. They are in great demand at any children's parties. Each costume requires a specific headgear. It is not always possible to buy what you need.