Zhanna Osipova
April Fool's Day is fun and funny holiday with jokes, drawings and games for everyone without exception. Here we are with the children and decided to "bake" paper cake for parents. Yes, so that it looks like a real one culinary product. Thus, to joke and amuse adults. Design and construction cake of our execution, but the idea is borrowed from the Internet. Look what we got.
How we baked cake with roses - MK.
Have taken corrugated paper for making corrugated tubes and an empty box cake.
Painted the inside of the box with white gouache.
To cake was big and tall, they took the foam and the bottom plastic bottle (2 l).
We fastened all the parts with PVA glue.
Sliced out paper rectangles(10X15cm).
They screwed up corrugated tubes. (Tightly wind the rectangle paper along the length of a pencil and squeeze into an accordion.)
Corrugated tubes packaged in a box for ease of use.
We begin to glue the workpiece corrugated tubes alternating two colors.
We decorate the workpiece with "cream" - white corrugated tubes.
We make roses and leaves. We cut rectangles from red and lilac paper(5X10cm). We twist corrugated tubes(flower petals, leaving 2 cm from the edge. For leaves, do corrugated tubes green.
From 5 petals, gathered together and fixed with a thread, we make a rose. Green corrugated tubes fold in half and glue the ends - the leaves are ready.
The most interesting and exciting moment. Decor cake flowers start at the top.
Then decorate the sides.
That's all.
Bon appetit.
A do-it-yourself paper cake with a surprise inside is a great gift for a baby, teenager and even an adult. Such a cake looks very original, and in each separate piece the birthday boy and his guests can find a surprise, a souvenir, a wish. A do-it-yourself cake will be appreciated not only by the hero of the occasion, but also by the guests who have gathered at the celebration.
Come see 10 legal gift tips to give yourself some money! The gifts you made are very special. Present self made says you've spent time thinking, planning, researching and, of course, this. I mean, he has a lot of affection.
Many of the links to English language, but we tried to choose textbooks with self-evident photos only. He has gifts for all people. Every year, do you look in vain for how to wrap your Christmas presents in an original and impressive way? We bring you great tips and tricks. Thanks to the original gift box, you can give your loved ones twice!
It is very easy to make a do-it-yourself paper cake with wishes and prizes. The main thing is to take necessary material and be patient. Below will be step by step master class. So to make it out corrugated paper with your own hands you need to prepare the appropriate materials:
How to make a paper cake is described in the following step-by-step instructions:
General color. Roll toilet paper or other stamp. First, mix the color in a bowl and apply it to the stamps and rolls. You can also use the faster way - just dip the markers and rolls into the paint. Then make prints on white paper. Sometimes under your arms appears bright color, but it does not matter. Keep your children or partners. Then let the paper dry - and that's it!
Christmas paper can also be made using a computer and a printer. Just find your favorite Christmas patterns and print them on white paper. If you have a small printer, you can attach individual papers with insulator. And if you have kids, have fun making them with Christmas paper. Just get them colorless colors and a large paper roll available in all office supplies. Remove the paper roll from the roll and let them print it with their hands and feet.
To make a large cake, you need to glue 12 large pieces. You can make not 1 cake, but according to the number of guests, so that each guest can receive a small present with wishes. The most difficult moment is to tie all the pieces together with a ribbon. The main thing is not to rush.
You will see that you will be delighted and entertained at the same time. Various types and colors of Christmas paper. Or hand paper for wrapping.
Make sure you really care and choose interesting or funny subtitles.You can decorate a decorative cake with the most different ways, most importantly, turn on the fantasy. There are a few original ways decorations:
You should buy beautiful stickers, and stick them symmetrically on each piece. The theme of decoration should be chosen according to the style of the holiday. If it's a children's party, then stickers with famous cartoon superheroes will do. Classic is good for adults flower arrangements. Foil stars, corrugated paper hearts look good.
You can buy light plastic toys, figurines, flowers. They must be fixed on each piece with glue.
When decorating a product, you must adhere to some rules:
Before filling the elements with wishes and gifts, you need to make sure that the glue is dry. When gifts and wishes are in place, then each piece can be tied with a ribbon.
For cooking you will need:
In one tier, you should get 11 pieces of chocolate cake. Make the product as follows:
Patterns can be different: there are pieces that open at the back, and there are pieces that close with a lid on top. Both options are successful and original.
Cake with a gift is cool and unusual idea. Each guest will receive a small gift and will be able to take it home.
Having dreamed up, you can make a masterpiece, a whole work of art that will make a splash at the holiday. Cake doesn't have to be just for birthdays. He will have to court at any solemn event or a simple family party.
If you do not know what to give for a birthday or Valentine's Day, you should pay attention to such an original souvenir as a paper cake. This is very, because inside you can put small cards with wishes or another present. A box for a surprise in the form of a cake looks very interesting and unusual.
You can easily pack various gifts and goodies in a paper cake. For example, you need to make as many "pieces" of the cake as there will be invited to the holiday. And inside each place a note with sincere wishes.
It is possible to create a paper cake in a different way. In this case, you need to take:
To make such a cake, you will need to take the following materials:
Such a souvenir is just perfect for a present on March 8 or romantic evening with a loved man. Inside the paper cake you can put:
To make such a paper cake, you will need to take the following materials:
To decorate a paper cake with a candle, you will need to take the following materials:
Corrugated paper tube cake. Master Class
This festive creamy cake is made using the technique of twisting corrugated paper tubes. Let's call this technique - corrugated tubes.
It is very popular in some countries. There, usually the tubes are glued with a glue gun. But we will use two common types of glue: PVA and glue stick. PVA should be thick enough, preferably in a bottle with a spout, and the glue stick should be fresh. The main tools for this technique are large knitting needles with end limiter. For this work, pairs of knitting needles with a thickness of 4.5 mm, 6 mm, 8 mm were used.
To make a cake from corrugated tubes, you will need a base frame. You can use a ready-made cardboard box, or you can make it yourself from thick paper or cardboard. Draw two circles from the same center with radii of 10 cm and 11.5 cm. Cut out along the outer line. Make teeth from the edge to the inner line.
Dear guests, we invite everyone to a festive tea party!
Make the side edges of the bottom layer. The length of the strip of the bottom layer is 62.8 cm, the height is 10 cm. Cut out the strip with a margin for gluing or glue it from several strips. Bend all the teeth to one side. Glue the side edge. Glue the circle. You can glue the cloves inside, but it is much easier - the cloves out. You can put the circle on the table, put the cylinder inside and glue the cloves. Then turn over.
We carry out a double corrugated tube for surface decoration. Cut a strip 15 cm wide from the roll. Fold it in half and cut it, you will get two rectangles 15 × 25 cm. Mark the middle line by folding. Take knitting needles with a thickness of 8 mm (others are also possible). Place the needle on the edge of the strip (the limiter should hang off the table) and wind the paper tightly.
Wind up to the marked midline. On the other hand, wind the paper onto the second needle.
When winding the second knitting needle, hold the first one with your hands.
Place the needles vertically on the stops. Grasp the bottom of the paper with your fingers. With small movements from top to bottom, tighten the paper until it is all creased on the knitting needles. You need to do this in small sections, rearranging your fingers.
This is what the paper looks like when it's all compressed.
Now you can take it off the needle. It turned out a double corrugated tube.
Make enough of these in different colors.
To glue the tube to the bottom layer, first try it on in height. Stretch to the desired length, thickly grease the inside of the PVA tubes and press firmly to the base.
Make decorative decorations in the form of white semi-ovals. Draw a semi-oval 12 cm long and 4 cm wide on thick paper. It is better to make a template to draw 6 such figures. Glue on the other side a strip of white corrugated paper. Glue only with a glue stick.
Cut out 6 blanks.
Twist 6 double white tubes from 13x25 cm rectangles on 6 mm needles. Bend the tube, slightly open in the middle and flatten the ends.
Glue the tube along the edge of the workpiece. Make 6 parts.
Glue the pieces by slightly bending them along the top edge.
Twist double white tubules on 8 mm needles. Paste them over the upper plane inside out. Make two concentric circles.
but make roses. To do this, you need single corrugated tubes. Take a strip (along the corrugation lines) 7 × 25-30 cm. Lubricate the edge with an adhesive pencil. Put the needle on the opposite side. Roll the paper onto the needle.
Place the needle vertically, put your fingers on the gluing points (so that the seam does not diverge. Squeeze the paper a little from top to bottom.
Squeeze all the paper to the end.
Remove the single corrugated tube from the knitting needle.
To make a rose, flatten the end of the tube, grease with PVA glue and twist the spiral, trying to keep the shape of the tube.
Flatten the tip again and glue inside.
It turned out a spiral rose.
Just like the bottom do upper layer cake. First, draw two circles with radii of 5 cm and 6.5 cm. Make teeth. Cut out a 6 x 31.5 cm side edge tape (don't forget the gluing allowance). Glue the base. Wind the tubes from rectangles 13 × 25 cm. Take thinner knitting needles - 6 mm. Cut each tube in half so that their height is 6 cm. Glue the side edges.
Twist two double green tubes and a few single green tubes. Glue double tubes on top along the edges, then spirally glue single tubes until you fill the entire plane.
Glue the top layer to the middle of the bottom layer. Fill the remaining gap with double tubes on 6 mm needles.
To make a lily, twist three double tubes from 12x25 cm strips on 4.5 mm needles. Cut each in half. Stretch to 7 cm. Slightly turn from the center.
Flatten the ends on the right vertically, and on the left horizontally.
Glue the right ends, and glue the left ends overlapping each other.
Bend the petal by wrapping it around your finger. Trim the tip to make it pointed. Make 6 petals.
For stamens, take strips 3.5 × 9 cm. Wind a single tube onto a 4.5 cm needle. Squeeze a small area.
Remove the tube and twist the remaining, uncompressed part into a flagellum. Make some stamens.
Glue a bunch of stamens, glue three petals around it, and then three more. Outside, the petals can be pasted over with a thin strip of corrugated paper. Got a flower.
Make leaflets from thin single tubes.
Glue leaves and roses.
Make lights out of thin tubes. Insert a skewer with the sharp end. Put on a tube folded from white paper pasted over with yellow corrugated paper. Fix the candles on the cake.
Corrugated paper tube cake. Master Class
This festive creamy cake is made using the technique of twisting corrugated paper tubes. Let's call this technique - corrugated tubes.
It is very popular in some countries. There, usually the tubes are glued with a glue gun. But we will use two common types of glue: PVA and glue stick. PVA should be thick enough, preferably in a bottle with a spout, and the glue stick should be fresh. The main tool for this technique are large knitting needles with a limiter at the end. For this work, pairs of knitting needles with a thickness of 4.5 mm, 6 mm, 8 mm were used.
To make a cake from corrugated tubes, you will need a base frame. You can use a ready-made cardboard box, or you can make it yourself from thick paper or cardboard. Draw two circles from the same center with radii of 10 cm and 11.5 cm. Cut out along the outer line. Make teeth from the edge to the inner line.
Dear guests, we invite everyone to a festive tea party!
Make the side edges of the bottom layer. The length of the strip of the bottom layer is 62.8 cm, the height is 10 cm. Cut out the strip with a margin for gluing or glue it from several strips. Bend all the teeth to one side. Glue the side edge. Glue the circle. You can glue the cloves inside, but it is much easier - the cloves out. You can put the circle on the table, put the cylinder inside and glue the cloves. Then turn over.
We carry out a double corrugated tube for surface decoration. Cut a strip 15 cm wide from the roll. Fold it in half and cut it, you will get two rectangles 15 × 25 cm. Mark the middle line by folding. Take knitting needles with a thickness of 8 mm (others are also possible). Place the needle on the edge of the strip (the limiter should hang off the table) and wind the paper tightly.
Wind up to the marked midline. On the other hand, wind the paper onto the second needle.
When winding the second knitting needle, hold the first one with your hands.
Place the needles vertically on the stops. Grasp the bottom of the paper with your fingers. With small movements from top to bottom, tighten the paper until it is all creased on the knitting needles. You need to do this in small sections, rearranging your fingers.
This is what the paper looks like when it's all compressed.
Now you can take it off the needle. It turned out a double corrugated tube.
Make enough of these in different colors.
To glue the tube to the bottom layer, first try it on in height. Stretch to the desired length, thickly grease the inside of the PVA tubes and press firmly to the base.
Make decorative decorations in the form of white semi-ovals. Draw a semi-oval 12 cm long and 4 cm wide on thick paper. It is better to make a template to draw 6 such figures. Glue on the other side a strip of white corrugated paper. Glue only with a glue stick.
Cut out 6 blanks.
Twist 6 double white tubes from 13x25 cm rectangles on 6 mm needles. Bend the tube, slightly open in the middle and flatten the ends.
Glue the tube along the edge of the workpiece. Make 6 parts.
Glue the pieces by slightly bending them along the top edge.
Twist double white tubules on 8 mm needles. Paste them over the upper plane inside out. Make two concentric circles.
but make roses. To do this, you need single corrugated tubes. Take a strip (along the corrugation lines) 7 × 25-30 cm. Lubricate the edge with an adhesive pencil. Put the needle on the opposite side. Roll the paper onto the needle.
Place the needle vertically, put your fingers on the gluing points (so that the seam does not diverge. Squeeze the paper a little from top to bottom.
Squeeze all the paper to the end.
Remove the single corrugated tube from the knitting needle.
To make a rose, flatten the end of the tube, grease with PVA glue and twist the spiral, trying to keep the shape of the tube.
Flatten the tip again and glue inside.
It turned out a spiral rose.
Just like the bottom one, make the top layer of the cake. First, draw two circles with radii of 5 cm and 6.5 cm. Make teeth. Cut out a 6 x 31.5 cm side edge tape (don't forget the gluing allowance). Glue the base. Wind the tubes from rectangles 13 × 25 cm. Take thinner knitting needles - 6 mm. Cut each tube in half so that their height is 6 cm. Glue the side edges.
Twist two double green tubes and a few single green tubes. Glue double tubes on top along the edges, then spirally glue single tubes until you fill the entire plane.
Glue the top layer to the middle of the bottom layer. Fill the remaining gap with double tubes on 6 mm needles.
To make a lily, twist three double tubes from 12x25 cm strips on 4.5 mm needles. Cut each in half. Stretch to 7 cm. Slightly turn from the center.
Flatten the ends on the right vertically, and on the left horizontally.
Glue the right ends, and glue the left ends overlapping each other.
Bend the petal by wrapping it around your finger. Trim the tip to make it pointed. Make 6 petals.
For stamens, take strips 3.5 × 9 cm. Wind a single tube onto a 4.5 cm needle. Squeeze a small area.
Remove the tube and twist the remaining, uncompressed part into a flagellum. Make some stamens.
Glue a bunch of stamens, glue three petals around it, and then three more. Outside, the petals can be pasted over with a thin strip of corrugated paper. Got a flower.
Make leaflets from thin single tubes.
Glue leaves and roses.
Make lights out of thin tubes. Insert a skewer with the sharp end. Put on a tube folded from white paper pasted over with yellow corrugated paper. Fix the candles on the cake.
Techniques used: corrugated tubes, paper plastic ..
Master class class is designed for older children preschool age, school age, teachers and parents.
Purpose: interior decoration, good idea for a gift.
Target: to cultivate patience, perseverance, the desire to go towards the intended goal. Develop creative thinking and imagination.
Equipment: white cardboard, corrugated paper, wooden skewers or knitting needles, PVA glue, glue stick, hot glue or Moment glue (transparent), cardboard rolls from toilet paper, scissors, needles with balls.
To do original gift or just to create a beautiful interior decoration, it is not necessary to "puzzle" and run around the shops in search of something original, spend huge sums of money. Much of what is sold in stores, we can do with our own hands from various improvised means, from what we have already bought earlier for other work. For example, it could be a CAKE….
I bring to your attention a master class on making a CAKE from corrugated paper. Very original birthday present.
1. Here is such a handsome man - we will succeed in the cake.
2. This is all we need to get started.
3. We glue the required number of rolls with each other and glue them on a previously cut cardboard circle (the number of rolls depends on what size cake you want to get).
4. Glue another circle on top.
5. After the glue dries, cut off the excess cardboard (along the contour of the resulting figure). This is how the bottom tier of the cake is obtained.
6. We make a few more tiers (pp. 3-5) and “assemble” the layout of the cake. The number of tiers depends on your desire. You can make only 2 tiers).
7. Cut corrugated paper (color of your choice) into rectangles about 12 X 8 in size and twist each rectangle according to the pattern.