Men's slippers with knitting needles with a description. Knitted slippers with a description

12.10.2020

Cast on 60 sts, garter stitch 6 rows in main color, 2 rows in another color, 2 rows in base. tsv., 2 rows other tsv., 2 rows main. tsv., 2 rows other tsv., 6 rows main. col. Close loops.
Fold the details like a loop and dial 12 sts on one narrow side, + 3 air sts. and from the second narrow side another 12 pet. There are 27 sts on the needle in total. On these loops, the toe part is knitted in the form of a triangle in garter stitch:
1 row - 27 pet. main col.
All even rows - according to the pattern, i.e. persons. pet.
3 row - 27 pet. other colors
5 row -12 persons., 3 vm. persons., 12 persons. main col.
7 row - 25 pet. other colors
9 row - 11 persons., 3 vm. persons., 11 persons. main col.
Continue to decrease by 3 pet. in the center in every 4th row of the main. col. There should be 12 strips in total. col. and 11 strips in other colors.
Cast on 27 sts from the center of the heel, then 26 sts on one side of the triangle, and 26 sts on the other side. and another 27 pet. to the center of the heel. There are 106 sts on the needles in total. Knit back and forth 6 rows of basic. tsv., 2 rows other tsv., 2 rows main. tsv., 2 rows other tsv., 2 rows of main. tsv., 2 rows other tsv., 6 rows main. col. Knit either on stocking needles or on circular needles (fishing line).
I knitted in a circle, alternating faces. and out. ranks. I knitted only 10 rows, then knitted in shortened rows, increasing the bow back and forth:
1 row - 80 faces., turn
2 row - 54 persons., turn
3 row - 47 persons., turn knitting
4 row - 40 persons., pov. elm.
5 row - 33 persons., pov. vyaz.6 row - 26 persons., pov. elm.
7 row - 19 persons., pov. elm.,
8 row - 12 persons., pov. elm.
9 row - 58 persons.
10 row - 106 persons. (In my case - out. pet.)
11 row - we start knitting the sole: 57 persons., 2 vm. persons., pov. work
12 row - 1st pet. sn., 8 persons., 2 vm. persons., pov. work
Next, repeat row 12 until 5 sts remain. from the sides. Next, knit 3 sts. vm.at the end of each row ("pet. from the sole and 1 pet. lateral), knit the last 2 pet. together and sew the heel. My heel was solid, so I reduced the st. pet heel linen and sewed the loops with a needle).

Footprints are soft and comfortable

Many of us prefer to wear shoes instead of slippers and socks at home, they are soft, comfortable and warm enough. We bring to your attention a method of knitting footprints from the fingertips to the heel, without a single seam.
For knitting sledkov you will need 100 g of semi-woolen yarn (100g / 100m), a set of stocking needles No. 4 - 5 pcs.

To start knitting, you need to make a set of loops simultaneously on two knitting needles, which is presented in detail .
Dial about 10 loops on each knitting needle, twist the ends of the threads and knit two rows in a circle with facial loops.

Next, start making additions on the sides, for this, first knitting loops from the knitting needle, pick up the bottom loop of the lying row with the right knitting needle, put it on the knitting needle and knit together with all the loops, at the end with the freed left knitting needle, pick up one more loop from the bottom of the lying row and also knit her facial. Repeat the additions again for the other side, thereby adding 4 additional loops in a row of 2 on the sides, then knit the next row without additions.

So alternate a row with and without additions until the toe reaches the width of the foot.

Then knit without adding to the top of the rise and divide the knitting in the center. To do this, after knitting to the central part * the front row, knit the last two loops with the front one, then turn the work, remove the first loop (thread before work) and knit the wrong row - with the wrong loops, knit the last two loops together with the wrong one, turn the work again, remove the first loop (thread at work) and knit the front row, repeating from * 3-4 more times, thereby making a decrease from the center of the track.

Next, knit without decreasing a straight fabric to the center of the heel. Then divide all loops into three parts and knit a regular heel upwards. To do this, in the purl row, knit the purl loops of the first part and the middle one, and * knit the last loop of the second part together with the first loop of the third part - the purl. Turn the work, slip the first loop (thread behind work), knit the loops of the middle part of the front and knit the last loop together with the knit with an inclination to the left with the first loop from the next knitting needle (slip the last loop, knit the first loop from the next knitting needle and stretch the knitted through the removed one) . Turn work again, slip first st (thread before work) and repeat from * until all sts have been decreased from edge needles. Bind off the remaining sts on the middle needle and you're done.

FOOTWEAR WITH EASILY REPLACEABLE HEEL

Slippers

VIDEO

photo

FOR SIZE 37-38

FOR SIZE 36-37

Slippers with knitting needles

STRIPS

From the author: "I knitted in 4 colors of threads: brown, white, turquoise and blue. You can take any colors and not necessarily 4. Cast on 29 loops. Then knit in short rows without knitting 3 loops each:
1-2 rows - 29 pet.
3-4 rows - 26 pet.
5-6 rows - 23 pet.
7-8 rows - 20 pet.
9-10 rows 17 pet.
11 row - 14 loops, but knit 1 person., 1 sn. thread at work
12 row - 14 pet.: 1 person., 1 sn. thread before work.
Now increase by 3 pet.
13-14 rows - 17 pet.
15-16 rows - 20 pet.
17-18 rows - 23 pet.
19-20 rows - 26 pet.
21-22 rows - 29 pet.
23-24 rows - knit on 29 pet. 1 person., 1 sn. like 11-12 rows.
25-26 rows - 29 pet.
This turned out to be 1 wedge of the pattern, in total they need 4. After 4 wedges, pet. close, sew with a set edge, and pull off the spout, fasten the thread. Then cast on 40 sts on the stocking needles, starting from the middle of the third wedge with dots to the middle of the second wedge and knit the fabric of the desired length to the beginning of the heel, knit the heel on the middle 10 sts. according to the principle of knitting the heel of the sock. Crochet the edge.
For a wide foot, cast on not 40 sts, but 2-3 more sts. from each side.
Easy loops for you and pleasant leisure!"

FOOTPRINTS - SOCKS SPOKING

FROM HOPE TOKARENKO

The tracks are knitted on two needles. They are very comfortable to wear and look beautiful on the foot. They are knitted from the remnants of yarn, but it is best to use yarn that contains more wool, because. they will be warm and follow the shape of your foot.
Cast on 30 stitches.
1p - 6p: person.p.
7r - 22r: knitted smooth surface (odd rows - knitted p., even rows - purl)
23 - 41r: knit the heel, for this knit 19 persons.p., and 20 and 21 pet. knit faces together, turn work. Knit 9 purl, and knit 10 and 11 sts together purl. Again, turn the work, knit 9 persons.p, 10 and 11 p. knit together persons., and so knit, alternating 24 and 25 p. until there are 10 sts left on the needle.
42r: dial 10 loops from the braids of the side of the heel, turn the work.
43r: Knit 20 knit sts and cast on 10 more sts from the other side of the heel. = 30 p.
44 - 74r: knit persons. satin stitch.
75r: start management: 7 persons., 3 persons together., 10 persons., 3 persons together., 7 persons.
76r: purl
77r: 6 persons., 3 persons together., 8 persons., 3 persons together., 6 persons.
78r: purl
79r: 5 persons., 3 persons together., 6 persons., 3 persons together., 5 persons.
80r: purl
81r: 4 persons., 3 persons together., 4 persons., 3 persons together., 4 persons.
82r: out. P.
83r: 3 persons., 3 persons together., 2 persons together., 3 persons together., 3 persons.
84r: 9 out and knit the 10th from the pigtail (in total, cast on 18 loops from the braids on each side).
85r: 4 persons., 3 persons together., 3 persons. and the 4th from the pigtail.
86r = 84r.
87r = 85r.
Repeat 84 and 85 r until all the loops of the braids are knitted.
Bind off remaining 9 sts.

Cast on 59 stitches and knit with a hollow elastic band, the height of the elastic band as desired.
Then we find the middle loop, this is the 30th loop and in each front row we knit three from one loop (faces, yarn, faces).
I knitted the side of the slipper with a pattern -. :
1st row: (right side) Thread A, 1 person. n. * 1 removed out. p., 1 person. p., rep. from * to the end of the row. 2nd row: 1 persons. p., * thread in front of the product, 1 removed out. p., thread behind the product, 1 person. p., rep. from * to the end of the row.
3rd row: Thread B, 2 persons. p., * 1 removed out. p., 1 person. p., rep. from * to ate, p., 1 persons. n. 4th row: 2 persons. p., * thread in front of the product, 1 removed out. p., thread behind the product, 1 person. p., rep. from * to ate, p., 1 persons. P.
The repetition of these 4 rows forms a knitting pattern.
So knit a slipper to the desired depth, then on the middle 13 loops we knit a trace, and then a heel.

Description:
Dial 22p.
1p-15p.main color, 6p.other color
2p-12p.main color, 6p.other color
3p-9p.main color, 6p.other color
4p-6p.main color, 6p.other color
5p-3p.main color, 6p.other color
6p-2p.main color, 4p.other color
7r-like 5r.
8p is like 4p.
9p-like 3p.
10-like 2r.
11r-like 1r.
12p-the whole row of main colors. 22p. 1 photo.
** Repeat again with 1p. for 12 rubles. 2 photos.
**This is the middle.
1p-7p.main color, 14p.other color
2p-6p.main color, 12p.other color
3p-5p.main color, 10p.other color
4p-4p.main color, 8p.other color
5p-3p.main color, 6p.other color
6p-2p.main color, 4p.other color
7r-like 5r.
8p is like 4p.
9p-like 3p.
10p is like 2p.
11r-like 1r.
12p-the whole row of main colors. 3 photos.
** Again we knit from 1p to 12p - 2 times. 4 photos.
**Knit 5 rows in garter stitch.
We launch.
Cast on loops along the edge of the semicircle, and tie the sole on the middle ones.
** On the sides of the sole, dial 17p. And knit to the required length.
Run heel.
Crochet.
Slippers ready

Slippers with knitting needles.

MK from L. Myasnikova.

Yarn - brown Semenovskaya *Natasha*. 100g - 250 m. 50% wool. 50% - acrylic. SECTIONAL - Trinity *Baby*. 50 gr.- 135m. 20% - wool. 80% - acrylic. Needles number 2.5. We collect 23 loops - knit 2 or 4 rows with a brown garter stitch. 1st petal - 1 row - Cr. 13 loops OTs (Main color - brown) 6 loops DC (additional color - sectional). There are 3 loops left on the left knitting needle, we do not touch them, turn the knitting to the wrong side and knit 6p. DC. 13 OC loops. Cr. 3rd row - Cr. 12 pts. 6 DC. 5 row - Cr. 11 OTs 6 DCs. 7 row - Kr. 9 OC. 12 DC. 9 row - knit like 5 row 11 row - like 3 row. 13 row - as 1 row. 21 row - 1 cr. 20 OC.
ERROR - NOT ROW 21, -- ROW 15

2nd petal - 17th row - Kr. 10oc. 6DC. 19 row - Kr. 9 OC. 6 DC. 21 row - Cr. 8 OTs.6DTs. 23rd row - Cr. 6 OC. 12 DC. 25 row - like 21 row 27 row - like 19 row. 29 row - like 17 row 31 row - Kr. 17 OC.

3rd petal - CENTRAL 33 row - Kr. 7 OC. 6 DC. 35 ROW - Cr. 6 OC. 6 DC. 37 row - kr. 5 OC. 6 DC. 39 row - Kr. 3OC. 19 DC 41 row - like 37 row 43 p - like 35 row 45 row - like 33 row. 47 row - Kr. 17 OC.

4 PETAL WE KNIT LIKE THE 2nd PETAL, BUT IN THE REVERSE ORDER - FROM ROW 29 TO ROW 17

WE KNIT THE 5TH PETAL AS THE 1ST PETAL - FROM ROW 15 TO ROW 1. and knit 2 or 4 rows with garter stitch brown thread. ALL KNITTING IS A GARSTER STITCH, I.E. FACE LOOP ON THE FACE AND ON THE INSIDE OF THE WORK.

On the last row, do not close the loops.

We sew along the sole. We collect 23 loops on the typesetting row + 23 loops remained with us unclosed. Only 46 loops and knit the length of the foot to the heel. Here you can knit with any pattern. enter DC thread. It all depends on your imagination. I started a path from the front loops on the sides, and knitted the top with a DC with an elastic band 1-1. We knit the heel as usual. I crocheted the top with a two-color twisted border. Light loops for you.

Simple tracks on two needles

http://klubok.kg7.ru/1/53/5459/

Model No. 3. We collect 22 loops and knit 10-12 cm with the main color. We begin to knit * RAINBOW * in short rows. 1-2p -20 loops red. 3 - 4 p. - 18 loops orange. 5-6 p. - 16 loops yellow. 7 - 8 p. - 12 loops green. 9 - 10 p. - 10 loops blue. 11-12 p. - 8 loops blue. 13-14 p. -purple.6 loops. 15 - 16 row. - with the main color all 22 loops. IT IS NECESSARY TO CONNECT 7 SUCH WEDGES. Then we also knit 10 - 12 cm with the main color. fold in half and sew

Model number 4 knitting is the same. Only after knitting a color row - we knit a row with the main color, also shortened rows. Try on the leg - how many wedges need to be connected. 3-4 is enough, and sometimes you knit 6-7. It all depends on the size, yarn, number of knitting needles.

In these footprints, the shortened rows are the colored rows. knitted 20 loops with colored thread --- you have 3 more loops on the knitting needles. You don’t touch them - turn the knitting inside out and start knitting with a colored thread back to the beginning of knitting with a colored thread.

2 knitting options

1: we collect for example 6 loops and knit the tongue in each even row, add 1 loop at the edges, the length of the tongue depends on how high your slippers should be. Then we add new color and we knit the footprint itself with a new color, here we add again in each even row along the loop along the edges. Do the addition until you have tied that length as well as the length of the tongue. Then we knit the sides and the sole with any pattern or plain, when you knit the length you need, knit the heel and close everything. At the end, sew on the tongue as in the picture and you're done.
2: We start knitting like normal tracks from the heel, knitting up to about a little more than the middle of the leg, on the contrary, we begin to decrease. The first time we close 2 loops in the middle and then in each 2 row along the loop along the edges and so on until you have, for example, 25 loops. Then close these 15 loops and separately knit the tongue according to the length you need, sew it on at the end.

HA 3-X

Cast on 24 sts, knit 4 rows with the main color. garter stitch.
Next, we proceed to knitting the pattern in short rows, i.e. we do not knit loops in a row. All even rows are knit in color.
1 row - 14 pet. main tsv., 7 pet tsv.A, turn knitting;
3 row - 15 pet. main tsv., 7 pet. color A, pov. elm.;
5 row - 10 pet. main tsv., 7 pet. tsv.V, pov. elm.;
7 row - 11 pet. main tsv., 7 pet. tsv.V, pov. elm.;
9 row - 6 pet. osn.tsv., 7 pet. tsv.D, pov.vyaz.;
11 row - 7 pet.basic. tsv., 7 pet. tsv.D, pov. elm.;
13 and 14 rows - 24 pet. main tsv., pov. elm.;
15th and 16th rows - 24 stitches with any of the colors A; B; D, knit;
17 and 18 rows - 24 pet. main tsv., pov. elm.;
It turned out one wedge of the pattern. You need 5 more such wedges. Finish the pattern with 4 rows of the main colors.
The loops can not be closed. Fold the knitting in half and make a seam along the sole.
Then cast on 24 sts. from the edge where knitting began. For convenience, distribute all pet. on 3 stocking needles and knit a straight fabric to the heel. Knit the heel on the middle 9 pet.

Very lazy slippers

Tatyana Kozhevnikova (Ivanova)

Dial the required number of loops, knit slippers from above. Knit with a pattern: 1st row: (person. side) Thread A, 1 person. P.
* 1 removed out. p., 1 person. p., rep. from * to the end of the row.

2nd row: 1 persons. p., * thread in front of the product,

1 removed out. p., thread behind the product, 1 person. p., rep. from * to the end of the row.

3rd row: Thread B, 2 persons. p., * 1 removed out. p., 1 person. p., rep. from * to ate, p., 1 persons. P.

4th row: 2 persons. p., * thread in front of the product,

1 removed out. p., thread behind the product, 1 person. p., rep. from * to ate, p., 1 persons. P.

The repetition of these 4 rows forms a knitting pattern. Next, we divide the loops into 3 parts, I have 23-12-23. We knit the cape to the desired length. Then cast on the loops along the edges of the cape and knit the height of the slipper. .finished the height of the slipper with one corn pattern and switched to knitting the trace, sewed the heel

The number of loops for American elastic is a multiple of 3 plus 2 hem.
1st row (person. side): - * 2 persons., 1 out. *
2nd row (wrong side): - * 1 person., 1 nakida, knit 2 facial and stretch them into nakida *
3rd row - repeat from 1st.

ON 2 SPOKES

Women's slippers with an ornament knitted with two knitting needles

Size: 36-38

You will need

Thick yarn (50% wool, 50% acrylic) - 100 g dark of blue color.

The remains of gray-blue, light blue for embroidery.

Needles number 4.

Hook number 5.

Facial surface: faces. rows - persons. loops, out. rows - out. loops.

Description of work

Slippers consists of three parts - upper, lower and back.

Upper part: type on knitting needles with a dark blue thread b p. And knit faces. stockinette stitch, inc 1 st at the beginning of each row until there are 18 sts on the needles. Then knit 20 rows straight. Close the loops. With blue yarn, embroider any pattern with a loop-to-loop seam, guided by the photo.

Lower part: knit as the upper part, but after knitting 20 rows straight, do not close the loops, but continue to knit, decreasing 1 st at the beginning of each row until 6 sts remain. Cast off the loops.

Back: Cast on 6 sts, knit faces. stitch, adding at the beginning of each row 1 p. until there are 18 p. Knit 2 more rows straight and close the loops. Connect all the details with a crochet 1 next to a st b / n with a gray-blue thread.

Embroider the ornament as shown in the diagram.

Embroidery pattern:

SOCKS

Master class of knitting socks on 5 knitting needles with a detailed photo report. Shown here are the basics of knitting the heel, shaping the wedge of the toe lift, and dropping the toe. Having learned these basics of knitting socks, in the future you can knit them in various techniques.

For knitting socks, choose half-woolen yarn with the addition of acrylic, for this master class we used pekhorka yarn 50% wool, 50% acrylic, 300m per 100g and stocking knitting needles No. 3 - 5 pieces. To make a sock right size, first you need to link a test sample facial surface and count how many loops are in 10 cm. Then we measure the ankle with a centimeter tape, the foot in the widest part - at the instep and at the base of the fingers, of course, the length of the foot and the height of the heel.

In our example, the knitting density sample was 10 cm 28 loops, ankle dimensions: 20 cm, instep 23 cm, foot width 20 cm. Thus, to start knitting the cuff, you need to dial 56 loops (always make the number of loops even) and distribute them on 4 knitting needles, 14 loops.

Next, we continue to knit the cuff in a circle with an elastic band 1x1 or 2x2, alternating 1 front or 1 purl or 2 front and 2 purl and in the following rows, knit over the front - front loops, over the purl purl. For decoration, you can enter threads of a different color without cutting the thread of the main color, and knit several rows of colored stripes.

So, when the cuff is connected to the required length as desired, we begin to knit the heel. To do this, we continue knitting with the front stitch of the loop only on two knitting needles, moving them to one, knit the front loops on the front side, turn the work and on the wrong side - the wrong loops. We knit the fabric to a heel height of about 4-5 cm, 15-17 rows.

Next, mentally divide the loops into 3 parts: 28 loops / 3 \u003d 9 side loops and 10 central loops each (always transfer the remainder to the center) and from the wrong side we begin to form the heel: we knit 9 loops (side part) with purl, 9 loops (central) and we knit the last 10th loop of the central part together with the first side purl, thus reducing the left side part by one loop. Next, we turn the work, * remove the first loop, thread at work and knit 8 front loops, and we knit the last 10th loop of the central part together with the side front with a slope to the left (we remove the 10th loop on the right knitting needle, without knitting, we knit the next side loop, and then we stretch the untied through the knitted loop). We turn the work, remove the first loop (the thread before work) and knit the purl row, knitting 8 purl loops, we knit the last loop together with the side purl. Then repeat from * until only the loops of the central part remain.

Having knitted the heel, we begin to knit the sock again in a circle, picking up loops along the side of the heel, it is more convenient for me to simply insert the knitting needle into the extreme half-loop and knit the front or back loop from it.

Thus, in the first row, from the sides of the heel, I collect 16 loops and distribute them on 2 knitting needles, adding 5 loops of the central part of the heel to them, I get 21 loops on the bottom of the toe and 14 loops (unchanged) on the knitting needles of the upper sock parts.

In the next rows, we begin to form a wedge of the ascent, decreasing on the sides one loop at a time, knitting together 2 loops of the front extreme loops from the knitting needles of the lower part of the sock, in each row or through a row in accordance with your measurements.

After decreasing the required number of loops, continue to knit in a circle with the front surface to the base of the thumb. Then begin to form a toe, reducing 2 loops on the right and left in each row, knitting two knits together from the top with an inclination to the left, knit 2, knit 2 together and so decrease until 4 loops remain, cut the thread, crochet the trim through the remaining loops and fasten it from the wrong side.

In each front row, 5 loops were knitted from this loop (faces, yarn, faces, yarn, front). I knitted the purl rows as knitting looks. When 97 loops were knitted on the needle (this is size 37), I knitted 6 rows of garter stitch, that is, all with facial loops, and began to run the sole on 13 loops (like a heel). Then sewed on the back. That's all!
From the comments: Without knitting 6 loops on the knitting needles, I begin to decrease the middle 3 loops of the sole in each person. in a row until one of the soles remains, and then I don’t sew with a needle, but I connect it with knitting needles, like a border for a shawl. Do not forget about the decrease on the sides.

FOR SIZE 39

Warm footprints

This simple model is suitable for both women and men. Slippers are knitted on two needles. For knitting, choose thick woolen yarn or make a thread in several additions, pick up thick knitting needles.

Total used for knitting slippers size 39 100 gr melange yarn, for the second option 50 g of dark blue yarn and 50 g of gray-blue, knitting needles No. 4.5.

Before knitting, measure the foot - measure its length and width.

Description of knitting slippers:

Make a set of loops for a length equal to twice the length of the foot minus its width. The number of loops must be odd. You will need marking rings to mark the places where you need to make additions, for this you can tie loops from a bright thread and put them on the knitting needles to the left and right of the center loop.

First, the sole of the slipper is knitted with a garter stitch - in the front and back rows, knit only the front loops. Through the row, make additions, knitting new loops from the crossed broaches raised between the loops. Increase after the first edge stitch, after the first marker mark, before the second mark, and before the last stitch on the needle. Thus, 4 loops are added through the row, of which 2 loops are added in the central part, marked with markers.

Knit the sole with a garter stitch, half the width of the foot high, then proceed to knitting the side of the slipper with the front stitch - knit the front loops in the front rows, and purl loops in the purl rows.
Knit in stocking stitch to a height of 2 cm without decreases or additions. Then, in each front row, decrease from the central part marked with markers, before the first mark, knit 2 front loops together with a broach, after the second mark, 2 front loops together.

Having made such decreases at the central part in three front rows, after knitting 2 loops together, do not continue to knit the row, but * turn the work, remove the first loop, knit the central loops from the wrong side, knit the last loop of the central part and the first side stitch together from the wrong side.
Turn work again, slip the first stitch, knit the center stitches, knit the last stitch of the center part and the first stitch from the side together with the knit stitch. * Repeat from * to * until you knit the top part.

Then knit the cuff with an elastic band 3 x 3 for a height of 8-10 cm. When you finish knitting the cuff, close the loops and sew the slippers on the wrong side, making the back seam along the cuff and the central one along the sole.

The second option for knitting slippers from yarn of two colors without a cuff. Knit the sole with a dark thread, and the upper part with a light one. Instead of a cuff, knit 2 rows of garter stitch, again introducing a dark thread into the work. Close the loops and sew a seam along the back of the slipper.

Tracks with braids around the edges from Ivushka

Why are slippers better than knitted socks? Firstly, they can be knitted faster, secondly, it will take you much less yarn, and thirdly, this option looks much more feminine. The main thing is to choose a delicate yarn, colors that are pleasant for you. And these slippers will become your favorite. And most importantly, you can knit none of these slippers, but under each home suit or a robe.

In this collection, I tried to pick up the most beautiful knitted slippers () with knitting needles. All slippers are given with detailed description and knitting patterns.

Practical and at the same time elegant knitted slippers with embroidery.

Size: 36-38

To knit slippers you will need: thick yarn (50% wool, 50% acrylic) 100 gr. dark blue, remnants of gray-blue, blue for embroidery, knitting needles No. 4, hook No. 5.

Pink knitting slippers

Size: 35/37 — 38/40 — 42/44

Foot length: 22 - 24 - 27 cm

Needles number 6 - or the size required to obtain 13 loops x 17 rows = 10 x 10 cm.

Garter Stitch (straight and reverse rows): all rows are knit.

Instructions for adding loops: add 1 loop on the front side, making a crochet. In the reverse row, knit the yarn over the back wall so that there are no holes.

Slippers: knit in straight and reverse rows from toe to heel.

Cast on 12-13-14 sts on needle size 6 (leaving the end of the thread about 30 cm for sewing). Mark 4th and 9-10-11 sts with a marker. K st, at the same time inc 1 st on each side of both markers, and repeat inc on every other row 4 times in total = 28-29-30 sts.

When piece measures 9-10-11 cm, work next row as follows: 7 sts in garter st, 14-15-16 sts, 7 sts in garter st. Continue in the same way until a height of 22-24-27 cm, close.

Assembly: sew and pull off the toe of the slipper with a thread

Tracks with leaves very soft and warm.

Knitted footprints with knitting needles. A very simple model even for beginner needlewomen.

Size: 35/37 – 38/40 – 41/43.

Leg length approx. 22 – 24 – 27 cm

Knitting density: 26 p x 34 p = 10 x 10 cm

You will need: 50g Drops delight by Garnstudio for all sizes; double pointed or circular needles 2.5 mm (40 cm)

Additions: inc 1 st in each section of stockinette stitch, working 1 yarn over with right side from each out. loops. Following. in a circle, knit a crochet with a crossed front (i.e. behind the back wall). The next addition is done on the left side of each out. loops.

Description of work. The item is knitted in the round. Cast on 72-81-90 sts on circular needles 2.5 mm. 3 circles - out. and 1 circle - persons. Continue with an elastic band 2 persons x 1 out. When piece measures 3 cm inc 1 st in each section of stockinette stitch = 96-108-120 sts. Continue with K3. x 1 out. When piece measures 6 cm inc 1 st in each section of stockinette stitch = 120-135-150 sts. Continue for 4 knits. x 1 out until the length of the part reaches 9-91/2-10 cm. Loosely cast off according to the pattern (how the loops look). Similarly, knit the second piece.

Assembly: Fold the product in half and sew.

Another very simple model of footprints, which is knitted on two knitting needles shawl pattern in short rows.

Size: 35/37-38/40-41/43

Foot length: 22-24-27 cm.
Materials: yarn DROPS ESKIMO (100% wool, 50 g / 50 m) - 100-100-150 g, knitting needles 6.0 mm.

Knitting footprints on two knitting needles: the work is done in a garter pattern back and forth on ordinary knitting needles.
Handkerchief pattern: all rows knit facial loops.
Cast on 28-31-35 sts on needle size 6 mm, mark sts after 22-24-26th sts with front side(remaining 6-7-9 loops for the toes).
We knit back and forth with a garter pattern, but every 4th row knit short - turn the work immediately after the mark.
Please note that when turning the work, we tighten the thread tightly to avoid holes.
We continue in this way to a height of 8-9-10 cm (we measure the larger side).
On next row from RS, bind off first 14-16-17 sts = 14-15-18 sts.
We continue to knit as before for another 2-2-3 cm (we measure the larger side).
On next row from WS cast on 14-16-17 sts at end of row = 28-31-35 sts.
We continue to knit as indicated until a height of 8-9-10 cm (measure the large side).
Close loose loops.
We stretch the thread through the extreme loops of the toes, pull off the thread and fasten from the wrong side, sew the seam under the foot and along the heel.

The second track is knitted in the same way.

Stunning not only warm, but also fun.

SIZE: 38/39

FOR KNITTING SOCKS YOU WILL NEED: 100 g white Rgia Silk (55% wool, 20% silk, 25% polyamide, 200 m/50 g). Remains of Regia Silk yarn (4 strands) in green, pink and apricot. Set of stocking knitting needles No. 3.5–4.5. Hook No. 3.5–4

garter stitch: persons. and out. R. - persons. P.

FACE SURFACE: persons. R. - persons. p., out. R. - out. p., in circular rows, knit faces.

KNITTING DENSITY, persons. surface: 20 p. and 28 circular p. = 10 x 10 cm.

POM-POMS: cut out two identical circles with a hole from cardboard, put them together. Take the thread folded in half, thread it through the darning needle and wrap the thread around the cardboard rings until the inner circle is filled. Cut the threads along the outer circle. Stretch a double thread between both circles and tie all the threads in the middle with it. Remove the cardboard circles and trim the pompom with scissors.

Attention! Knit socks with a thread in 2 additions.

DESCRIPTION OF WORK: Cast on 44 sts and work in 12 cm straight and reverse rows in garter st. Transfer the loops to 4 stocking knitting needles and distribute them (11 sts on each knitting needle). Continue knitting in circular rows. satin stitch. At a total height of 20 cm, perform a toe general rules knitting socks. Fold the edge in half and sew. Crochet the top edge of the socks with 1 circular p. Art. b / n, finish 1 connection. Art. Then knit 1 circular p. from the arches as follows: 1 tbsp. b / n, * 3 tbsp. s / n in the next 2nd p., 1 tbsp. b / n in the next 2nd p., repeat from *. Make pompoms (3 cm in diameter) in three colors and sew them to the middle of the upper part.

Advice: instead of small pom-poms, you can make one large colorful pom-pom. To do this, you can use multi-colored threads at the same time or wrap paper rings in separate colored sections.

Delicate slippers are knitted from soft yarn . In such slippers it is very pleasant to meet a frosty morning.

Description of knitting slippers

Dimensions: 36/37 (38/39)

For knitting you will need: 50 g lilac, 50 g each or the remains of pink and yellow Leggero yarn (100% microfiber, 160 m / 50 g); knitting needles No. 4; hook number 3.

Garter stitch: persons. and out. R. -persons. P.

Flower A: tie 1 air. p. and knit as follows: 3 air. p. (= 1st st. s / n), * 1 picot (= 3 air. p., 1 conn. st. in the 1st air. p.), 1 tbsp. s / n in typesetting air. n., repeat from * 3 times, finish with 1 picot and 1 connection. Art. in the 3rd air. n. start.

Flower B: tie a chain of 6 air. n. and conclude it 1 connection. Art. in a circle. Then knit as follows: 1 air. n. (= 1st st. b / n), * 2 st. b / n, 1 semist., 1 tbsp. s / n, 1 half. and 1 tbsp. b / n in a circle, repeat from * 3 times, finish 2 tbsp. b / n, 1 semist., 1 tbsp. s / n, 1 half. and 1 conn. Art. in the air n. start.

Knitting density, garter stitch: 16 p. and 33 p. = 10×10 cm.

Description of work: 1 slipper consists of a sole and an upper part. For the sole, dial 8 sts with a lilac thread and knit with a garter stitch, while for rounding, add on both sides in each 2nd p. 2 x and in every 4th p. 3 x 1 p. = 18 p.; knit straight. On a total length of 19.5 (21) cm, subtract 1 p. for rounding on both sides, in each 4th p. 3 x and in the next 2nd p. 1 x 1 p. On a total length of 24.5 (26) cm, close the remaining 8 p. For the upper part, dial 8 p. with a lilac thread and knit with a garter stitch, while for rounding, add on both sides in each 2nd p. 2 x and in every 4th p. 3 x 1 p. \u003d 18 p. On a total length of 8.5 (9.5) cm, close the middle 4 p. And first knit the left half, set aside the rest of the p. For rounding, close from the inner edge in the next 2nd p. 1 x and in the next 4th p. 1 x 1 p. = 5 p.; knit straight. On a total length of 18 (19.5) cm, add 1 p. from the inner edge, in each 2nd p. 3 x and in the next 4th p. 1 x 1 p. \u003d 10 p. On a total length of 27.5 (29) cm, set aside the loops. Symmetrically tie the right half.
Assembly: sew the reserved loops of the upper halves with a knitted seam, then sew the upper part to the sole so that the seam is inside. Tie the upper edge with a lilac thread for 1 circle. R. Art. b / n and “crustacean step” (= st. b / n from left to right). For straps, cast on 17 sts with a lilac thread and knit with a garter stitch, while after 1 cm make 1 hole for a button (= knit the 3rd and 4th sts together on the right side, 1 yarn over); close the loops at a total height of 2 cm. Sew along the strap to the inner edge of the slipper. For each slipper, tie 6 yellow flowers A and 6 pink flowers B. Sew the flowers evenly onto the slippers, while using 1 pink flower as a button

Slippers with a button.

Description.

Dial 5 loops and knit with a garter stitch, making additions at the beginning and end of the row (through the row). From two you need to add 10 loops, you should get 25 loops on the needles. Then we knit as follows: remove 1 loop without knitting, 1 person., * from one loop, knit 2 out., from one loop, knit 2 persons. *, finish the row of 1 persons., 1 out.
1 remove without knitting, we knit all the following loops according to the figure: 2 faces, 2 out. etc.

It is necessary to knit about 30 rows with an elastic band, then we knit two loops together where we added them, facial-facial, purl-purl. Now we switch to garter stitch, decreasing at the end and beginning of the row (through the row) until 5 loops remain on the needles. It remains to tie the strap of the required length, do not forget to make a hole for the button, knit 2 together and double crochet, this will be the loop. The final stage is sewing slippers: fold in two knitted canvas and sew the heel and toe of the slipper, the sections are knitted with an elastic band. Sew on a beautiful button, the slippers are ready

Warm and comfortable slippers from Drops.

Beautiful footprints knitted with Norwegian pattern will be a great gift for your family and friends.

Cozy slippers knitted. A simple pattern that even beginner knitters can do.

Comfortable slippers-socksknitting needles.

Description:

Cast on 7 stitches and knit 12 rows in garter stitch (all knit stitches or purl as you prefer)

13 row: K1, yarn over, knit 1, yarn over, purl 1, yarn over, knit 1, yarn over, purl 1, yarn over, knit 1, yarn over, knit 1.

14 row: 4 out., 1 persons., 3 out., 1 persons., 4 persons.

15 row: 2 knit., yarn over, 1 knit., yarn over, 1 knit. 1 out., 1 knit., yarn over, 1 knit., yarn over, 1 knit. 1 out., 1 knit., yarn over, 1 knit. , yarn over, 2 persons.

16 row: 6 out., 1 person., 5 out., 1 person., 6 out.

17 row: 3 knit., yarn over, 1 knit., yarn over, 2 knit. 1 out., 2 knit., yarn over, 1 knit., yarn over, 2 knit. 1 out., 2 knit., yarn over, 1 knit. , yarn over, 3 persons.

18 row: 8 out., 1 person., 7 out., 1 person., 8 out.

19 row: 4 knit., yarn over, 1 knit., yarn over, 3 knit. 1 out., 3 knit., yarn over, 1 knit., yarn over, 3 knit. 1 out., 3 knit., yarn over, 1 knit. , yarn over, 4 persons.

20 row: 10 out., 1 person., 9 out., 1 person., 10 out.

21 row: 5 knit., yarn over, 1 knit., yarn over, 4 knit. 1 out., 4 knit., yarn over, 1 knit., yarn over, 4 knit. 1 out., 4 knit., yarn over, 1 knit. , yarn over, 5 persons.

22nd row: 12 out., 1 persons., 11 out., 1 persons., 12 out.

23 row: 6 knit., yarn over, 1 knit., yarn over, 5 knit. 1 out., 5 knit., yarn over, 1 knit., yarn over, 5 knit. 1 out., 5 knit., yarn over, 1 knit. , yarn over, 6 persons.

24 row: 14 out., 1 persons., 13 out., 1 persons., 14 out.

26th row: purl 8, purl 2 together, turn knitting, in fact, we begin to knit the sole of the slipper like a heel at the toe. So we knit until we reduce all the loops. and 9 loops will remain on the knitting needles.

Now we string the loops on the sides of the slipper and knit with one piece to the beginning of the heel, it remains to tie the heel of the slipper, the middle 9 loops are in work, we start decreasing from both sides, as we knit the heel. The slippers are ready;

Knitted slippers with rice pattern

Size(s): 35/37 — 38/40 — 41/43
Foot length: 22 - 24 - 27 cm.

Yarn: DROPS ESKIMO by Garnstudio (100% wool; 50g ~ 50m)

Number of balls: 150 gr.

Tools): straight knitting needles 4 mm.

Knitting density: 15 p. x 19 p. = 10 x 10 cm.

Garter stitch in straight and reverse rows. Knit all stitches. 1 rib = 2 rows L.

Addition: Increase on both sides of the central two loops with the help of crochets. On the next row, knit yarn over twisted to avoid holes.

Description of knitting slippers

Knit in straight and reverse rows from top to bottom, starting from the middle of the back side.

Cast on 40-44-48 sts. Work 8 rows in garter stitch. Place a label in the middle. Continue in stockinette stitch, work edge stitches as before in garter stitch. At the same time, in the first row of the front surface, add 1 p. On both sides of the central two p. - See instructions for adding. Repeat inc on each row (i.e. with both RS and WS) a total of 13-14-16 times = 66-72-80 stitches. Work one row after the last inc. Now the length of the product is 11-11-12 cm. Continue with a garter stitch, while after the 6th row close 1 st at the beginning of the next four rows (i.e. close 2 sts on each side) = 62-68 -76 sts. After knitting a total of 10 rows in garter st, cast off all sts loosely.

Assembly

Fold the item in half. Sew a seam under the foot and a back seam.

Knit a second slipper.

Slippers footprints knitted

Cast on 30 stitches.
1p - 6p: person.p.
7r - 22r: knitted smooth surface (odd rows - knitted p., even rows - purl)
23 - 41r: knit the heel, for this knit 19 persons.p., and 20 and 21 pet. knit faces together, turn work. Knit 9 purl, and knit 10 and 11 sts together purl. Again, turn the work, knit 9 persons.p, 10 and 11 p. knit together persons., and so knit, alternating 24 and 25 p. until there are 10 sts left on the needle.
42r: dial 10 loops from the braids of the side of the heel, turn the work.
43r: Knit 20 knit sts and cast on 10 more sts from the other side of the heel. = 30 p.
44 - 74r: knit faces. satin stitch.
75r: start management: 7 persons., 3 persons together., 10 persons., 3 persons together., 7 persons.
76r: purl
77r: 6 persons., 3 persons together., 8 persons., 3 persons together., 6 persons.
78r: purl
79r: 5 persons., 3 persons together., 6 persons., 3 persons together., 5 persons.
80r: purl
81r: 4 persons., 3 persons together., 4 persons., 3 persons together., 4 persons.
82r: out. P.
83r: 3 persons., 3 persons together., 2 persons together., 3 persons together., 3 persons.
84r: 9 out and knit the 10th from the pigtail (in total, cast on 18 loops from the braids on each side).
85r: 4 persons., 3 persons together., 3 persons. and the 4th from the pigtail.
86r = 84r.
87r = 85r.
Repeat 84 and 85 r until all the loops of the braids are knitted.
Bind off remaining 9 sts.

There are more threads on this topic:

We also have a very good selections knitting for children:

Knitted blankets (11 models with description)

The article was prepared for the Dashkin Dom website. When copying a link to the site is required.

Chapter: ,

Do-it-yourself shoes have long earned well-deserved love from those who knit and those who wear them: needlewomen have learned to knit everything - starting warm boots and ending with stylish sandals - even fashionable beach slippers can be knitted by yourself!

But if such work is sometimes only possible for masters, not only an experienced knitter, but also a beginner in this industry of needlework can knit slippers. Knitting patterns are incredibly simple, but at the same time, the products themselves are amazing, warm and beautiful. And from some types of yarn it is also delicate, like a lilac mist. In just a few days, you can make soft indoor shoes for all family members.

Slippers for women can be knitted and crocheted. At the same time, the number of knitting needles varies - each knitter chooses a knitting method for her hand - whether she will create a future masterpiece for the home on 2 knitting needles, or 4 x, or even on circular ones. Below we will discuss these methods.

Knitting slippers with knitting needles can not only be an experienced knitter, but also a beginner in this industry of needlework

Knitting slippers in this way is possible even for those who, up to this point, have never held knitting needles in their hands. If you are looking for simple and easy slippers for the first experience - you are here! The scheme is very simple, even a child can handle it.

We knit step by step:

Cast on 48 stitches and knit the first row.
Having started the second row, attach a yarn of a different color and knit a couple of rows with it.
Alternating color every couple of lines, make 13 cm of the product.
After that, close eight loops on both sides and knit the remaining section with a length corresponding to the length of the foot.
Then knit a row with a decrease in a loop on each side.
Make the next row without decreasing, and on the last row again remove a couple of stitches.
Crochet the thread through the stitches, pull them together and fasten.
Make the top seam of the foot and the seam on the heel.

By the same principle, knit the second sock.

Gallery: knitted slippers (25 photos)

Simple knitting slippers for beginners (video)

How to knit slippers on two knitting needles: a description of creating a model

Guided simple description, you can knit original indoor slippers on just two knitting needles. This greatly simplifies the knitting process. You can easily create seamless patterns. Yes, and the size of the product can be any, just increase or decrease the number of loops. Try it and make sure that even with just 2 knitting needles you can create real masterpieces!

Guided by a simple description, you can knit original indoor slippers on just two knitting needles

Progress:

Dial a total of eight loops, then knit one row with facial ones.
In the next row, increase according to this scheme: a pair of facial, yarn over, four facial, neck and a pair of facial.
Again make a line without an increase.
At the next stage, make an increase according to the following scheme: four knit, yarn over, a pair of knit, yarn and four knit.
After that, continue knitting pearl pattern until the product is nine centimeters long.
At the end of the next pair of lines, cast on nine loops.
Continue knitting with a pearl pattern until the product acquires a length of 21 centimeters.
After that, knit nine facial and turn the work, start knitting the reverse row.
Close the first twenty-one loops, and knit a couple of rows on the remaining ones and finish knitting.
Pull the thread through the initial loops, pull off the sock and sew the socks along the central part, while leaving an open segment of six centimeters from the top of the product.
Sew the edges along the back.

Children's slippers with knitting needles: step by step instructions

When making your own slippers for children, you need to consider that such products should not only be soft and warm, but also beautiful. From cheerful multi-colored yarn, you can create bright and unusual models - these can be slippers in the form of cars, or reminiscent of marshmallows, or pig slippers, popular this year. The most unusual option home shoes for a child - slippers-mouse. The kid simply does not want to part with them, and, accordingly, his legs will always be warm.

Progress:

Initially, dial 28 loops and knit, alternating front and back twelve lines.
After that, continue knitting with the front stitch.
In order to form the heel, divide the loops into three parts and place them on three knitting needles (there should be ten loops on the extreme ones, and only eight on the central one).
Knit only the central knitting needle, and at the end of the row, connect the last loop with the first on the other knitting needle.
After there are no loops left on the side knitting needles, continue knitting in a circle. To do this, lift ten loops from the side of the elastic, dial ten more on the third, and lift ten from the elastic on the fourth.
In a circle, knit six centimeters of the product.
After that, start knitting a pair of loops together when switching to a new knitting needle.
When there is only one loop on each of the knitting needles, they must be knitted together, and the thread pulled off and hidden on the wrong side.
Crochet eyes and nose.
Crochet and tie the ears, for starters, simply dialing three air loops.
In the first row, make a couple of single crochets.
The second has three, and the third has four.

When making your own slippers for children, you need to consider that such products should be not only soft and warm, but also beautiful.

sew on ready ears to slippers.

How to tie men's footprints

Links for adults are no more difficult to tie than for children.. For men, these socks will be simply indispensable. For an experienced needlewoman, making them is a matter of a couple of hours. You can’t, of course, say that they are downright lazy, but they fit quite simply even for beginner knitters.

Links for adults are no more difficult to tie than for children.

Progress:

Cast on sixty stitches at once.
Knit fifteen rows with an elastic band.
Immediately distribute the loops on a pair of knitting needles, and leave one in the center.
Knit one half in garter stitch, yarn over, knit the central part.
Yarn over again and knit another piece.
Thus, to make the tedious depth of the future footprint.
Divide the work into three parts, selecting fifteen loops in the center.
Initially, half is knitted, then the middle ones from the loops, leaving only the last one.
Knit it with the first loop of the second half.
Turn the product and therefore knit this row with the same principle.
Continue to work until only fifteen loops remain in the center.

The loops that remain, knit in several lines and finish with the first part, not the side.

Japanese knitting needles: master class

Slippers and slippers in ethnic style are very popular - for example, Turkish slippers, or Scandinavian slippers with a pointed toe and beautiful Norwegian patterns.Japanese traces look incredible. It even seems to many novice needlewomen that their manufacture is already very complicated and beyond their power. But this is not so, having dealt with the scheme, the work will be exciting and simple.

Japanese traces look incredible

Progress:

On the knitting needles, dial 40 loops and knit with an elastic band, alternating a pair of facial and a pair of purl eighteen centimeters in height.
Continue to knit already garter stitch, while subtracting a pair of loops from each of the two sides.
Continue knitting in this manner until there are only five stitches left on the needle.
Knit twenty rows of tie.
Do the same on the other side.

Fold the workpiece in half and immediately sew from the sides.

Home boots: knitting with knitting needles

Such little chuni will help to warm the child's legs in winter. They fit very simply, while they look quite impressive. And the child is unlikely to want to take them off, unlike ordinary slippers.

Progress:

Dial ten loops and tie the sole of the desired length on them.
After that, dial on all sides of the loop.
In a circle, knit five lines with facial stitches.
On the next three rows on the front knitting needle, knit three purl, then six facial and again three purl.
On the next line, turn the loops to form a coil. To this end, knit three purl loops and remove three stitches on the same knitting needles.
Remove the next three stitches on the hook and move the stitches from the first needle.
Knit alternating six purl and only three facial ones, not putting the loop, which is located near the last knitting needle, into work.
Move the left loop to the front knitting needle and knit together with the next one.
After that, knit in accordance with the pattern until only one stitch remains, it will need to be knitted with the side.
Expand the row and continue knitting, knitting the last loop with the adjacent one.
Knit six rows in total.
Continue knitting in a circle (24 rows in total).
Close loops.

Insert drawstring at ankle.

Knitted slippers (video)

Home slippers can be both simple, classic and original. If they are hand-tied, then they have a lot more advantages. The feet are very warm in them, and the skin does not dry out at all. After all, they are made in accordance with personal preferences. Any needlewoman very carefully approaches not only the choice of model, but also yarn. Naturally, the shoes are of high quality.

Elizabeth Rumyantseva

For diligence and art there is nothing impossible.

Content

At home, a person wants to feel comfortable and cozy. Slippers are of particular importance. They create that same home environment. Knitting slippers with knitting needles is an easy way to create your favorite thing for yourself self made, which will allow you to feel the unique comfort of home. Knit slippers for yourself, men, children, following our detailed step by step instructions and following all the above recommendations.

We prepare materials and tools

For knitting slippers you will need knitting needles. Their thickness depends on the type of knitting chosen. For lace slippers, thick knitting needles are suitable, but dense and durable footprints need to be knitted on thin knitting needles.

Choose your yarn carefully. It should be durable, not fade, not shed and be pleasant to the touch. For knitting children's slippers, you need to pay attention to the slipperiness of the finished product. Threads with the addition of synthetics are suitable. Pure wool will be prickly and slippery. The needles can be on a fishing line or straight. The article will also discuss how to knit slippers on five knitting needles.

You will also need a centimeter tape, a hook, a gypsy needle. For the insole - dense fabric, and better - felt or leather.

We determine the size of the product

The choice of the size of a child or an adult depends on how the slippers will be knitted. Footprints are measured in exactly the same way as socks. In this case, you can use the standard scheme for determining loops for knitting socks.

In other cases, when a dense sole is used or slippers are knitted in a different way, the size is determined depending on the size of the shoe. You can measure your ankle circumference and instep height. Add these two numbers and divide by two. The number of loops is calculated depending on the density of knitting, which is determined by the sample.

Knitting slippers based on knitting needles: a step-by-step master class with a photo

The easiest way is to knit house slippers on the basis. Best Option for the base there will be a felt insole. You can circle the foot on paper and cut out two soles according to the resulting pattern. Please note that they must be symmetrical. We put the finished insoles aside and start knitting slippers with knitting needles, following a simple step-by-step pattern:

To create slippers for size 36, we collect 42 loops on two knitting needles. We knit with a garter or facial knit 1.5-2 centimeters.
We divide the loops into 4 parts: we leave the extreme quarters on the knitting needle, and we continue to knit in the middle, that is, 20 loops.
We continue to knit only in the middle. You can change the thread or choose a pattern. We knit until the length of the product reaches the end of the little finger.
If you used a different thread, break off the end. We continue knitting with the same thread as we started. Along the resulting rectangle, we collect 25 loops.
We form a toe. Knit unfinished rows until four loops remain. We continue knitting, picking up loops along the edge on the second side of the rectangle.
We knit 6-8 rows with the selected knitting to create the height of the future product.

On this you can. But, before closing the loops, try on the workpiece on the leg - does the knitted fabric cover the foot. If not, knit a few more rows.

Having closed all the loops, you can start collecting slippers. To do this, using a gypsy needle and a thick thread, we sew the knitted fabric to the insole. At the same time, we sew the seam on the heel. So, according to the correct knitting technology, in a short period of time you will knit comfortable and warm slippers.

Footprint slippers with embroidery

There is another way to create slippers. In this case, the seamless technique of knitting socks is used, but without elastic. To complete, follow the description:

It is necessary to dial the required number of loops for quickly knitting slippers-sledkov (depending on the calculation according to the table).
We knit 2-3 rows of satin stitch and proceed to. We set aside two knitting needles and continue to work on the other two. We knit the height of the heel.
We begin to knit two loops together on each side to create a heel wedge.
As soon as all side loops are closed, we make a set of edge loops and continue knitting in a circle.
To form the desired size, we make removals in even rows on the 1st and 3rd knitting needles.
We knit to the desired length - the product should cover the little finger or reach the bone of the thumb.
We close on the 1st and 3rd knitting needles 2 loops in even rows until the number of loops is halved. We continue to decrease already in both even and odd rows. We tighten the remaining four loops with a thread.
Ready-made slippers are decorated with embroidery. You can use floss threads or multi-colored yarn. It is easier to do this using a gypsy needle. The choice of drawing depends on your desire.

Tip: do not place the embroidery so that the threads are in the area of contact with the floor, that is, on the sole or side parts.

This technique will be especially familiar to those who have already knitted socks. But for beginner knitters, creating footprints is not difficult. If you have any questions about this technique, you can find answers to them in our video tutorial.

Baby slippers or flight of fancy

Knitting children's slippers is a separate topic that requires not only developed imagination, but also great skill. You can knit the footprints and simply decorate them with embroidery, pattern and appliqués. If skill allows, then mom will have great idea- knit slippers for a baby in the form of muzzles of animals or any other shape. In slippers made of thin openwork knitting, the baby can even sleep.

When choosing a model, consider the tastes of your child. For a boy, an unusual and beautiful knitted in the form of a tank slipper.

A cool idea for footprints for a girl in the form of little animals - a hedgehog, a dog or a tiger's paws. If a girl goes to dances, then knitting Czechs will be a wonderful and stylish solution. In order for the child to have an unusual pair of shoes for school, take the trouble to weave ballet flats for him. The technique for making such shoes is more complicated, but after several trainings you will be able to knit such a product. Great gift idea for New Year for a child - do-it-yourself slippers in the shape of a Christmas tree.

But still, the most exciting activity for you will be knitting slippers for babies. These are unique models that seem complicated only at first glance. To create them, you can use the above master class, which will help you a lot.

Decorate the slippers with whatever you want. by the most simple method is the thread embroidery described above. Models with appliqué look great. You can do voluminous application and create interesting faces or flowers.

Skilled craftswomen decorate slippers knitted with a lace pattern, rhinestones, beads and stones. They can be located along the edge of the product or on its upper part. Thanks to these methods, you can make elegant slippers, even with a minimum of skill.

Slippers knitted using a complex pattern look especially attractive. No less interesting are the multi-colored models.

Pro Tips

When knitting slippers, use dense threads that cannot be separated into individual fibers.
In the toe and heel area of the trail, you can strengthen the wedges by adding a second synthetic thread.
Don't make the tracks loose. Having a short length, they will fall off the leg. To prevent this, you need to knit a couple of rows with a tight elastic band and only after that continue knitting according to the pattern.
For embroidery, use threads that do not shed. Do not be too lazy to pre-wash a piece of thread and rub it on a white cloth. If there are no traces left, feel free to use threads for embroidery. The same applies to applications. The canvas of the fabric should not shed, otherwise your slippers will not be so attractive after washing.
The most practical are slippers with soles. For winter evenings, you can knit footprints or slippers using the sock technique, and reinforce the finished product with an insole sewn over a knitted fabric. These slippers will last you a long time. They are especially suitable for men and children. In the latter case, try to use a non-slip cloth. Leather or rubber soles are ideal.

If step by step master class too complicated for you, we suggest you try to learn how to knit slippers by following the instructions of the video tutorial. You can watch the video until the end, then stop at any convenient place, and if necessary, watch it again and again. We are sure that thanks to the video you will be able to master a new hobby, as well as create any home slippers not only for yourself, but for all your loved ones.

Did you find an error in the text? Select it, press Ctrl + Enter and we'll fix it!

you learned to knit simple loops: knit and purl, why don't you try to knit slippers with knitting needles? Slippers are essential footwear for every day at home. Even if you are warm and comfortable at home, in slippers, knitted with your hands you will feel much more comfortable.

Slippers with knitting needles can be knitted from thick yarn of the same color, or you can choose fun colors and spend the rest of different threads. Multi-colored slippers are knitted using lazy jacquard or patchwork technique. Both of these techniques are interesting and unusual. It is worth trying them on simple things, like slippers, and then using them in large products.

Sole for knitted slippers

The weakest point in knitted slippers is the sole. It wears out quickly, so to strengthen the sole, you can add a thick nylon thread to ordinary threads. Alternatively, you can buy a ready-made sole for slippers, knit a double sole, sew a leather insole to a knitted sole, or buy a special yarn for knitting socks. She passes pre-processing and is resistant to abrasion and does not peel.

Yarn for knitting slippers with knitting needles:

Alize Superwash - 75% superwash wool, 25% polyamide; 420 m/100 gr. (Türkiye)
Yarn Opal (Germany). This yarn has many colors and patterns, but it is expensive.
Yarn Trinity sock Waterfall - 70% wool, 30% capron; 400 m/100 gr. The most affordable. Suitable for plain slippers. (Russia)
Yarn ZitronTREKKINGXXL - 75% virgin wool, 25% polyamide; 420 m / 100 gr); (Germany).
Yarn Pekhorka Nosochnaya - 50% wool, 50% PAN; 200m/100gr (Russia). This yarn has the smallest amount of wool in the composition.
Schachenmayr Regia yarn for socks is of high quality and beautiful, composed of 75% wool and 25% polyamide. She has one minus - the price. Yarn from Germany.

What knitting needles to choose for knitting slippers

The choice of knitting needles depends on the model of slippers. Some slippers are knitted on 5 stocking needles, and some on two knitting needles. A crochet hook is often used to knit soles. And yet, do not forget to purchase markers, they are needed for complex patterns.

But for starters, it’s still worth choosing the model you like and buying yarn for it, choosing knitting needles. We have already talked about yarn, and now we offer you a selection of more than 30 models of slippers with knitting needles. Knit for your pleasure.

Slippers with knitting needles. Models from the Internet

Rectangular knitting slippers: a step-by-step master class!

interesting selection on the site Selection for knitting on 2 knitting needles

The basis of these wonderful knitted slippers is the most ordinary rectangle, knitted on two knitting needles, and then sewn along the sole. Brilliant solution, right? Here are two options for rectangular slippers, green and red-brown. See detailed master class with a pattern from Elena Gotlib and please yourself with a new thing!

Slippers knitting from T. Brazhnikova

Scandinavian slippers knitting

Let's knit slippers for the house, soft, beautiful and comfortable. They will be pleasant to walk around the apartment, easily and silently.

They are knitted from Vintage yarn (200 m/100 g), in two colors - Oats and Promenade. We take one skein of each color. The thread of yarn includes fibers of wool (40%), acrylic (52%) and nylon (8%). It differs in endurance, softness and good preservation of appearance.

We will knit with 4.5 mm knitting needles and 4 mm crochet. You will need a stitch marker (pt).

Knitted slippers knitted garter stitch

Yarn: two skeins of fine sock yarn (each yarn needs about 35 g / 160 yd / 150 m). Since these two yarns will be joined together, you can choose the appropriate thickness of yarn for knitting in one thread.
Yarn in a contrasting color for the seam and hem (fine for knitting in 2 strands or thicker yarn).
Size: female large (EUR41). The size can be easily selected by changing the number of loops and the length of the sock.
Gauge/Needle: Gauge: 19 sts / 10 cm (4 inches) in garter st.
Needles: 3.5 mm (circular or stocking). One additional knitting needle for closing loops using the 3-needle method. Hook 3.5 mm. Darning needle for stitching.

Knitted slippers knitted with lazy jacquard

Size 37-38.
Yarn “Krokha” Troitsk Worsted Mill, 20% wool, 80% acrylic, 135 m / 50 g.
Consumption of light gray yarn 30 g, brown 40 g.
Set of 5 knitting needles No. 3.

Knitted slippers from designer Ashley Knowlton

Slipper final measurements: foot circumference: 16.5(19.5, 22) cm.
Length to joint: 10(11.5,12.5) cm.
The overall length can be changed.
Yarn: about 92 (110, 146) m of thick yarn. The total footage depends on the final length.
Sample used yarn Quince and Co. Puffin (100% wool, 102m per 100g skein), color Parsley (parsley).
Knitting needles and tools: US 10.5 circular needles (6.5mm), for knitting using the magic loop method, two cr. knitting needles, or a set of toe knitting needles.
Needle for braids; tapestry needle; latex glue for soles (preferably).