Dress year short pattern. A simple pattern: a dress with a sun skirt is the perfect outfit for the summer. Here I will show two patterns of a year dress

Good day. I present to your attention a pattern of a year dress. This is a very feminine and stylish dress, many evening and wedding dresses are sewn using godet wedges, and everyday skirts and dresses take on a more airy and elegant look. By the way, the pattern of the year skirt.

• And also you can find patterns,.

Here I will show two patterns of a year dress.

• The first is with long sleeves and year wedges. Below is a schematic representation of it.

• The second with one-piece short sleeves.

Since this dress is semi-adjacent without chest darts, as well as darts at the waist, you should pay attention to the choice of material. These should be highly elastic fabrics.

• The breast undercut must be completely removed. The neck and front and back along the shoulder line should be increased by 2 centimeters.
• And along the middle line, it is necessary to deepen the neck of the back by one, the front - by three. In order to build a one-piece sleeve, you need to deepen the armhole by 2 centimeters.
• Please note that unlike the first pattern of the godet dress, here the wedges of the godet are one-piece with the main details.

Watch an interesting video on sewing a dress from a real master of his craft, I'm sure you will be interested.

Good luck and love.

This godet dress is a real treasure! Such a year dress can be sewn from iridescent gold satin with elastic threads, from taffeta and any other dress material. How to sew a year dress?

Before you start modeling a year dress, you need to build a year according to your measurements. Since the year dress is tight-fitting, allowances for freedom of fitting can be completely omitted or given the most minimal.

Rice. 1. Modeling the front of the dress

Rice. 2. Godet dress pattern - back

Rice. 3. Godet dress pattern - frill

Rice. 4. Bow pattern

Godet Dress Pattern - Modeling

On the front half of the year dress and on the back of the year dress, transfer the tucks, as shown in the dress pattern. Model embossed seams along the lines of the tucks. Shorten the front of the dress and the back of the dress to the desired length of the skirt (without flounces).

The flounce of the year dress should be modeled separately. If it is not possible to cut out the flounce of a year dress without seams, you can make 2 seams that will match the side of the dress.

In addition, cut out the belt of the year dress.

How to sew a year dress

From the main fabric it is necessary to cut out:

1. Detail 1 - 1 children. with a fold
2. Detail 2 - 2 children.
3. Detail 3 - 2 children.
4. Detail 4 - 2 children.
5. Shuttlecock - 1 child. (or 2 children with a fold)
6. Belt dress year - 2 children.

The details of the facing of the top of the year dress completely duplicate the pattern of the dress to the waist.

1. Turning details 1 - 1 children. with a fold
2. Turning det. 2 - 2 children.
3. Turning det. 3 - 2 children.
4. Turning det. 4- 2 children

The details of the facings of the year dress must be reinforced with thermal fabric.

From the lining fabric, it is necessary to cut out parts 1-4, minus the facings. Additionally, you need to buy bones for the side seams of the dress and the reliefs of the back of the dress.

How to sew a year dress

Baste and stitch the relief seams of the dress and the side seams of the dress. The allowances of the side seams, taking together, stitch off 0.7 cm from the seam. Lay the line from the top of the bodice of the dress to the waistline of the dress. Cut the bone to measure for threading into the resulting drawstring. The length of the bone should be 1 cm shorter than the drawstring. Insert a bone. Re-stitch the drawstring along the top of the year dress and along the waist line of the dress so that the bone does not fall out.

Sew a hidden zipper on the back of the year dress. On the bottom of the dress, baste and sew a flounce. Reinforce the facing details of the top of the year dress with thermal fabric. Sweep the facings of the year dress with details of the lining of the dress.

Sweep side and relief seams on the lining. Fold the lining with the dress face to face. Sweep and stitch along the top and laces of the zipper. Turn the dress inside out, sweep clean over the top and iron. Tuck the bottom of the lining and baste by hand with hidden stitches, closing the sewing allowance of the flounce of the year dress.

Turn the flounce of the dress along the bottom and hem it manually with hidden stitches. Sweep the belt of the godet dress and grind it on all sides, leaving an open area for eversion. Turn out the belt of the year dress, iron it. Sew up the open area by hand with blind stitches.

Place the belt on the dress along the seam and sew firmly to the dress with hidden stitches. Tie a bow in front of the dress.

What girl doesn't want to be like a princess? I think there are none, and no matter how some people swagger, deep down they would like to be small, fragile ladies. And what is the main attribute of the princess? Of course, a beautiful detachable dress with a fluffy skirt with large counter pleats. This is exactly what we will sew today.

What will be required:

• Dress fabric - 2.4 * 1.4 m,
• Lining for the bodice - 0.5 * 1.4,
• interlining formband,
• Hidden lightning.

Pattern of a dress with counter folds

Our princess dress consists of a bodice and skirt "Tatyanka". In other words, the pattern is needed only for the upper part. I propose to take it as a basis (follow the link and download the archive with patterns).

About how to sew a pleated skirt, I wrote in great detail in the article. As a result, we will only need to connect the upper and lower parts. To better understand this process, I suggest watching the video at the end of the article.

How to sew a dress with a pleated cut-off skirt

Step 1. Processing the bodice. Sew tucks on the bodice of the front and parts of the bodice of the back. Cut the depths of the darts of the front bodice to the width. 1 cm. Then iron the tucks of the bodice and back alternately to the mid-front line. On the bodice of the dress with a fluffy skirt, sew the side seams and then the shoulder seams.

Step 2. Turn and sew the bottom of the skirt. Next, start creating folds. Lay and sweep the folds along the upper cuts of the skirt panels. On the detachable skirt, sew the sides. seams. Do not forget to leave open the entrances to the pockets, if any. If desired, you can do without pockets, I think they are useless for such a dress. However, if you still decide to make them, then I recommend watching the master class in this article.

Step 3. Sew the skirt to the bodice of the dress. Iron the allowances.

Step 4. Sew a zipper on the middle sections of the back. Sew the middle seam along the back from the bottom to the end of the zipper.

Step 5. On the lining, also sew the darts and sew the seams.

Step 6. Process the neck.

Step 7. On the sleeves, if provided, sew tucks, iron their depths up. Perform a fold. Sew. Sew on the sleeves.

Bow pleated dress - back view

Dress patterns with a detachable skirt with calculations

Several drawings of detachable dresses with ready-made calculations. Measurements are guidelines for specific sizes, see the size chart below.

Dress with detachable skirt size 46

Hello my dear blog readers! Today we will model a skirt. This skirt model will suit any woman, it is elegant, stylish and visually lengthens the legs. You can sew it absolutely from any fabrics (both summer and winter). The standard length is 70 cm, but if desired, it can be made shorter and “on the floor”.

We take the basis of the skirt - the front and back panels.

We lay down 20-30 cm from the hip line and draw a horizontal line through the entire drawing.

This level will start skirt wedges.

Wedge skirts can be of two types:

• one-piece
• set-in

Based on the name, we cut the one-piece wedge in one piece with part of the skirt panel, and cut the set-in wedge separately with allowances, and sew it to the skirt details.

A year skirt can have 4, 6 or 8 wedges. So it will be convenient to divide the skirt pattern into these equal parts. But with a special flight of fancy, the skirt pattern can be divided into unequal parts, and wedges can be made of different widths and lengths. Feel like a fashion designer and experiment! And I will show the basic principle of constructing wedges of a year skirt.

Six-piece Skirt

In order to get 6 wedges on the skirt, you need to build 3 wedges on the skirt diagram, since in the drawing we are building half of the skirt (half of the front of the skirt and half of the back of the skirt). You can place these three wedges absolutely anywhere, but for symmetry it is better to do it this way:

• we make one wedge in the side seam
• we make one wedge from the center line of the undercut of the rear panel
• one wedge is made from the center line of the front panel

We make a wedge of any desired size. For example: the angle of the wedge starts at a distance of 25 cm from the line of the hips. To do this, we draw a horizontal line at a distance of 25 cm from the level of the hips. Along the bottom line of three vertical lines (the center line of the undercut in front, the center line of the undercut of the back and the side seam) we set aside 10 cm to the right and left. We connect these points with the point of the corner of the wedge.

You can cut the whole part with a wedge, or you can cut the wedge separately.

If we cut one-piece parts, then the front of the skirt will be in three parts and the back of the skirt will be in three parts.

Four-blade skirt

The four-blade is built according to the same principle as the six-blade, only for the verticals for building wedges we take the side seam and the fold line in the center of the front. Everything else is the same as in the description of the six-piece skirt.

Eight-piece Skirt

The skirt of the eight-piece combines the principle of building a four-piece and a six-piece.

Verticals for building wedges:

Back panel:

• back center line
• center back seam line
• side seam

Front panel:

• front fold line
• centerline of the undercut
• side seam

In total, there will be 4 wedges on the front of the skirt, if it is expanded in full size, and 4 wedges on the back of the skirt.

The famous Coco Chanel once said: “If you remember a woman, but did not remember the dress that she was wearing, then she was dressed perfectly!” Find your perfect dress with us and sew it!
We offer you the most accurate dress patterns for every taste and for every occasion: short and long dresses, patterns for dresses with sleeves and without sleeves, puffy and fitted dresses. You can use ready-made model solutions, or design your own dresses using the modeling methods presented in the Sewing School.
If you are new to sewing, start with simpler models - sew a dress with a simple silhouette, evaluate the accuracy of the pattern, the fit. If the dress "village" is perfect, move on to more complex models. Use high-quality fabrics and threads, because it is the fabric that is the soloist in dresses of a simple cut, creating a chic image of a sophisticated lady. Be sure to build at the beginning, according to which you will model your future creation.
We have prepared for you a lot of useful tips, master classes, ready-made dress patterns, and basic patterns for different types of figures.
Sewing with us is easy, the main thing that is required of you is a great desire to master this exciting and creative skill. Are you ready to plunge into the world of fashion with us? Then choose and sew!

On the eve of the holidays, Anastasia Korfiati's Sewing School has prepared a pleasant surprise for all readers of the website. Especially for you, Anastasia Korfiati has created a simple cut, but incredibly spectacular festive dress made of blue-emerald glitter with a degraded effect. Such a model is suitable for almost any figure and, depending on the color and quality of the material from which you sew it, it will look completely different. Sparkling glitter, luxurious jacquard, satin, silk and even lace - any elegant fabric will suit this dress. A ready-made pattern of a festive dress for 5 sizes and tips on modeling for a non-standard figure are in our next lesson.

Simple in cut, but very warm and comfortable, a free silhouette dress was created especially for the cold season. The model is made of soft textured knitted fabric and has several non-standard details: counter pleats on the sleeves simulate volume, large patch pockets cut across create geometry, the original hem of the lower edge adds lightness to the product. Spectacular buttons play the role of bright accents and give the model a complete look. And even if you are not a fan of short dresses, by combining this warm dress with tight skinny jeans, leggings or thick woolen tights, you will feel comfortable in any situation. A pattern and a master class on sewing a warm dress are in this lesson.

The quality of the material that is used for tailoring is often the starting point when creating a product sketch. The density, elasticity coefficient and color of the material give rise to the designer's imagination of the outlines and silhouette lines of the future model. For our next lesson, we created a model from dense “heavy” dark plum synthetic jersey, and when working on the model, it was the material that dictated the silhouette of the dress. It turned out to be a product that can emphasize all the advantages of a female figure!

A one-piece sleeve is not only a very popular modern trend, but also an excellent solution for soft-shaped clothing, because the shoulder line of such a sleeve turns out to be a streamlined smooth shape, and the configuration of the shoulder slope and the width of the sleeve itself can be varied depending on the angle of the sleeve inclination during modeling. Let's take a closer look at what types of one-piece sleeves are, how they differ and how to model a one-piece sleeve with a gusset on your own.

Each fashion show of the famous designer and inimitable style icon Victoria Beckham is a real event and always collects a huge amount of admiring reviews. Dresses created by her almost never go out of fashion - elegant forms, flying silhouettes and enveloping fabrics are the main components of the success of her models. Due to numerous requests from our subscribers, we are publishing a pattern that we developed based on a dress from Victoria Beckham.

Puffy voluminous sleeves are a very bright and feminine trend of the season. And since this style focuses even more on the figure and makes it very elegant, girls are happy to follow the fashion trend and choose dresses with similar sleeves. A striking example of this is Celine Dion's recent appearance at the Alexandre Vauthier show, where the singer appeared in a mini dress with grotesque puffy floor-length sleeves. We do not offer you to plunge headlong into bold experiments, but start with a sophisticated and feminine dress with an open shoulder line and voluminous sleeves.

We could not pass by the original idea of ​​a viscose dress with a high ascot collar, the bow in which is sewn separately and tied with large eyelets installed directly on the corners of the collar. We are sure that you, looking at this wonderful dress, will want to sew a similar one for your wardrobe!

When preparing for a vacation, it is better to think over your wardrobe in advance. Clothing should be not only bright, but also comfortable, and the fabrics from which you plan to sew your beach dress or tunic allow the skin to breathe and at the same time they do not form too many folds and creases when you take them off when you come to the beach. The ideal material for such clothes is undoubtedly cotton jersey. And today we offer you two luxurious models of beach dresses that you can sew without any pattern in just half an hour. All you need is a piece of fabric and a sewing machine.