The times are returning when things, connected independently, were of great value. Openwork mittens with knitting needles will come in handy not only in winter, but also in early spring.

The description in the lesson is given for the seventh size of mittens. Abbreviations:

persons. - face loops
out. - purl.

To make one pair of openwork mittens you will need:

• 100 grams of thread (50g / 125 m.);
• knitting needles, set of five pieces, No. 3.5;
• additional device for removing loops.

Left mitten

Cast on 48 stitches and distribute evenly (make 12 stitches). Knitting close in a circle. Work 35 rows in 1 x 1 or 2 x 2 rib.

Having finished forming the cuffs, proceed to the main part of the product. Loops on the 1st and 2nd knitting needles, perform faces. satin stitch, and on the 3rd and 4th - with an openwork ornament.

openwork pattern

Legend:

• ᴏ - yarn;
• - out. P;
• □ - persons. P;
• / - 2 sts are knitted together with a slope to the right;
• \ - 2 p. together are performed with an inclination to the left.

The pattern is repeated until the product is the desired length. It turns out the back side with a beautiful ornament.

At a height of 6-7 cm, a hole is formed above the rubber band, where the thumb will be. It is located on the third spoke. Make 3 knit loops, then remove 7 pieces and set aside for now. For further work, dial new 7 units, and make faces for the remaining 2 loops. Work in this technique to the end of the row.

After the required hole is left behind, work continues: 1 and 2 knitting needles - with a pattern according to the scheme, 3 and 4 - with front stitch. When the desired length of the product is reached, proceed to the implementation of a neat toe.

The first three circles remain unchanged. Then make a decrease on the needles:

1. On the first: 1 persons. with a slope to the left, 2 together with a slope to the left, make others with an openwork ornament.
2. On the second: the loops are knitted in a pattern until 3 pieces remain, then 2 are knitted together., 1 knit.
3. The third knits like the first, and the fourth like the second.

The decrease is carried out until the moment when you get 2 units on the knitting needles. The remaining 8 loops are pulled together with a thread, and fixed from the inside.

Right mitten

Her knitting takes place in a mirror image to the previous one. The difference is that the pattern will be located on the 3rd and 4th needles, and the finger hole on the second from the side of the palm. To do this, two loops are knitted, 7 are removed on an auxiliary pin, and 7 are cast on a working knitting needle, the remaining 3 are made with front stitch.

Thumb

Set aside 7 units to work, dial 3 loops from each side and 7 from the opposite side. Then divide them into 4 knitting needles as in the photo (5 for each).

Knitting openwork mittens is carried out in circles. 5 cm before the end of the needlework, begin to decrease the loops of the toe. To do this, on the needles, two are first knitted together once. The decrease is carried out in each subsequent row until there are 2 loops left on any knitting needle.

Pull the thread through them, and fasten it on the wrong side.

In conclusion, it is worth noting that you can use patterns on mittens at your discretion. The openwork rapport should take no more than half of the cast on loops.

Video: Openwork knitting mittens

A simple sample model with braids and openwork. Detailed description in video tutorials from experienced needlewomen.

Openwork mittens with knitting needles with patterns

So that your hands do not freeze in the cold, you need to knit mittens on knitting needles. We will make mittens Cats. We knit for convenience on two knitting needles. Such wonderful mittens will appeal to both children and adults. Our master class is very detailed, with diagrams and clear drawings. We hope that even a beginner will find it easy to understand our explanations. To get started, look at the size chart to understand how many loops to dial for work.

For work you will need:

1. Yarn 100% wool or wool with mohair - 70-80 grams, in 2-3 threads, depending on the thickness of the yarn.
2. Spokes 2.5.
3. 10 grams of blue, black, light gray and dark gray yarn.
4. Needle.
5. Pins.

We measure the length of the palm, the girth of the wrist, the length of the thumb.

We take a wrist 19 cm. Our knitting will look something like this: Right mitten.

We start knitting with the LEFT mittens.

But with the difference that we knit a mitten from two halves (upper part and palm), gaining 36 loops on the knitting needles from below. Therefore, the whole mitten will be when we sew it - 72 loops. Our pattern is dense, you need to knit tightly so that the mittens are warm.

We start with an elastic band 2/2 or take a more complicated pattern, “braids”.

We knit the upper part of the mittens. Cast on 36 stitches.

• Row 1: K4, P2, K4, P2, K4, P2, K4, P2, P4, P2, K4, P2.
• Row 2: K2, p4, k2, p4, and so on until the end of the row.
• 3rd row: as 1st row
• 4th row: as 2nd row
• 5 row: as 1st row
• 6 row: from the 4 facial we make a “braid”: we cross 2 and 2, something like this:

The width of the pattern is 27 loops, the height is 43 loops. Therefore, from the beginning of the row, knit 7 loops in the main color, 3 loops in dark gray and further along the pattern. We knit to the end of the little finger (about 14 cm). Next, we knit with the main fabric with a “braid” pattern. We begin to decrease the loops. On each side, knit 2 loops together in the front row. You should get a beautiful triangular toe. If you don't like triangular, you can make the toe round. To do this, knit through 1 loop 2 loops together. What is left, pull off at the end and sew up.

The most difficult thing here is to untie the finger. We collect 36 loops and knit cuffs, as in the upper part. Next, we knit with facial viscous (1st row - facial, 2nd row - purl, 3rd - faces., And so on). Determine where your thumb begins. Approximately 6-7 cm from the beginning of the facial knitting. Approximately 17 rows. We stopped on the front side of knitting, 26 persons. loops, remove 8 loops on a pin, 2 facial loops. The next row of purl we reach the pin and cast on 8 loops (as at the beginning of knitting, we cast on loops).

Next, knit as the top. Finished and returned to the finger. We remove 8 loops from the pin, we collect 2 loops on the sides and 8 loops on top (in the figure with a red thread). We got 20 loops for the finger. Evenly distributed on 3 knitting needles and knit to the base of the nail. Decrease: divide into 4 parts and knit 2 loops together in each row. Finished finger, remove the thread inside out. We sew both halves. A cat scarf can be knitted separately and sewn on, or done as in the diagram.

See size chart above. We knit these mittens a little narrower than the previous ones. Mittens with an interesting jacquard pattern. We knit with a solid cloth and sew the sides.

We start from the top. Cast on 33 stitches. We knit with an elastic band 2 facial, 2 purl. Shown in the photo.

Drawing we have 23 loops. So from the beginning of the row with the main thread 5 loops, and then - the pattern. Start knitting the pattern according to scheme 1 to the end of the little finger. Then we decrease at the beginning and at the end in each row, 1 loop. We measure, we put a palm. It is necessary that 15 loops remain on top. We knit two rows evenly and then move to the palm and begin to add in a mirror order. Knit according to scheme 2 to the base of the thumb. 2 loops in the main color and 8 loops to remove on a pin. Finger to perform, as in the previous knitting. We knit with a pattern to an elastic band. Knit an elastic band and finish knitting. Sew the side seams with threads of the main color. You can knit according to this pattern, a slightly different pattern, the number of loops is the same:

Mittens . One needle at work. You need a little yarn: 50 grams.

It took quite a bit of yarn for mittens: two small balls. Knit mittens like this: 7 loops on four knitting needles, elastic band 1 * 1, then throw one loop on each knitting needle, alternate threads for knitting a striped belly of a cat, then leave room for a finger, tie it again and start decreasing.

Knit mittens with knitting needles so that your hands do not freeze even in the most severe frost!

Mittens are the most practical and comfortable accessory for a cold winter. Today on the market you can buy mittens of different models, but it is more pleasant to wear if you knit them yourself.

• If you learn how to knit clothes, then you can create whole sets for winter - a hat, scarf or snood and mittens. These things complement each other perfectly if they are created in the same style using the same pattern.
• To learn how to knit beautiful mittens, you must first create a simple model of mittens - with a simple pattern and without a seam.
• Based on the ability to knit such accessories, you will be able to knit any warm items of clothing for your husband and children.

Mittens, like woolen socks, should be able to knit every woman. Let's look at how to create simple mittens for women and men with knitting needles without a seam.

Scheme and description:

Such a product can be plain, or you can add a thread of a different color to an elastic band or front surface. The knitting pattern for such mittens is simple: 2x2 elastic on the wrist, the rest is the front surface.

• For the knitting process, prepare woolen yarn- 70 grams and 5 short knitting needles No. 3.
• For a wrist circumference of approximately 20 cm, you need to dial 36 loops(9 stitches on each needle).
• Knit the right mitten first. Mentally, for yourself, number the knitting needles: on the 1st and 2nd knitting needles - the loops of the lower part of the product (palm), on the 3rd and 4th - the top.
• Tie first an elastic band 2x2 7 cm high.
• Then knit in the round facial loops to the beginning of the thumb - 7 cm.

We continue the steps:

• Knit the thumb on the right part on the first knitting needle, and for the left - on the second knitting needle. So, knit the first loop of the first knitting needle with a regular front stitch, and remove the 8 others on a safety pin, fasten it.
• Then cast on 8 yarn over on the same needle. and knit the last 9th loop with the front stitch. The mitten has a hole for the thumb.
• Now knit to the nail of the little finger - 8 cm.
• Toe mittens knitted with decreasing loops. On the 1st and 3rd needles, knit the first two loops together behind the back wall. First turn over the first loop. On the other needles, knit two loops together at the end behind the front wall.
• So knit until there are 2 loops on each knitting needle.. Tighten the loops and fasten from the inside out.
• Thumb knitting- remove the pin and insert one knitting needle in place of this pin, and thread the second on the opposite side. It turned out 7 loops on the lower needle and 6 loops on the top.
• Divide sts over 4 needles: three will have 4 loops each, and one will have 3 plus one loop, pull out from the side edge.
• Knit your finger in a circle to the beginning of the nail.. Then start subtracting.
• Decrease on the finger is made, as on the toe. When there is one loop left on each knitting needle, pull off the loops and fasten from the inside out.
• Knit the left mitten in the same way as the right, but in a mirror image.

If you have mastered the knitting technique with front stitch, then you should start knitting openwork patterns. Mittens with this pattern look original and stylish.

Knit such openwork mittens with knitting needles, it will turn out interesting, and your hands in such an accessory will be feminine and beautiful.

Patterns with descriptions:

• Cast on 44 sts - 11 sts on each needle. Knit a 2x2 rib.
• Knit the first row with knit loops.
• On next row, dec 2 sts together with RS. Do this on each spoke.
• Two knitting needles - front stitch. The other two knitting needles begin to knit a pattern: the wrong side, the rest are facial, the last is the wrong side.
• Again on two knitting needles facial loops.
• One purl and 6 front, yarn over, front, yarn over, remove one loop, remove 2 loops on the left side. Pass the next loop through the loop that was removed and pull through it. Next, knit to the end of the needles.
• Two knitting needles again with front stitch.
• Purl stitch, knit 7 stitches, yarn over, knit stitch, yarn over, knit stitch, slip the stitch onto the right needle and subtract two stitches from the knit stitch. The loop that was thrown over, pull through the next loop. Then knit to the end of the needle.
• Again 2 knitting needles facial loops.
• Purl, throw 3 loops on a free knitting needle and leave at work. Knit 3, then slip sts off of an auxiliary needle and work in stockinette stitch. 2 front loops, yarn over, knit, yarn over, knit 2, throw 1 loop on the working knitting needle, decrease two loops. Pull out the thrown loop, 2 facial, purl.
• Two knitting needles in stockinette stitch.
• Inside, 9 front loops, naid, front, nakid. 3 facial, 3 facial. Throw a loop and 2 together. Pull out the thrown loop, inside out. Rapport is ready. Continue like this until the toe of the mittens.

See the video for details on knitting such a pattern. The craftswoman made double mittens with a knitted lining.

Video: Knitting Mittens double-Openwork leaves with braids. Part 1

Video: Knitting Mittens double-Openwork leaves with braids. Part 2

Video: Knitting Mittens double-Openwork leaves with braids. Part 3

Video: Knitting Mittens double-Openwork leaves with braids. Part 4

Video: Knitting Mittens double-Openwork leaves with braids. Part 5

Video: Knitting Mittens double-Openwork leaves with braids. Part 6

Video: Knitting Mittens double-Openwork leaves with braids. Finish.

Here are a few more patterns of openwork patterns for knitting mittens:

You can knit mittens and a shawl with this pattern - you get an interesting set.

An original pattern that is easy to knit on the needles. Leaves and bumps will perfectly decorate your mittens.

Beautiful rhombuses superimposed on each other will look great on the top of the mittens.

Mittens for lovers are a stylish accessory that symbolizes the warmth of feelings and unity. In such mittens it is pleasant to feel the warmth of a loved one, walking together in severe frost.

Knit mittens for lovers with a white heart on a red background, or vice versa, a red heart on a white background. In addition, you can make a common mitten so that when walking through the streets of the city, always hold hands and bask in the warmth of each other.

Scheme with a description of the general mittens:

• The photo shows that the elastic band of the mittens for each hand is knitted separately. 7 cm knit with a pattern 2x2 - 2 pieces. Cast on 16 stitches on each needle. We will knit with two knitting needles.
• Now join two elastic bands on circular needles.

We continue:

• Knit in stockinette stitch in the round. There is no need for a finger hole on this mitten. Therefore, knit until the beginning of the creation of the heart 7-8 cm.
• Knit the heart according to the pattern, first making 6 loops in the middle of knitting on one side, with a white thread, through 2 loops.
• In the next row there will already be 7 loops with a white thread through one red thread. Next, continue along the pattern, first knitting the loops with white thread, then reducing the white color until one loop remains.
• Tie the toe of the mitten as described above and when 2 loops remain, tighten them and fasten from the wrong side.

Here are a few more photos of how to knit mittens for lovers:

The pearl pattern is often used for knitting. Even a beginner needlewoman will be able to knit mittens with such a pattern, as it is simple.

How to knit women's mittens with pearl pattern? Scheme:

Description:

• 1st row alternates 1 front loop, 1 front loop.
• 2nd row - again alternate purl 1 and knit 1, but knit the wrong side over the front loop of the previous row, and knit the front loop over the wrong loop.
• Then repeat the 1st and 2nd row until the end of knitting.

Double mittens are comfortable to wear in the cold or when you want to play in the snow, especially for children. Such mittens will not get wet quickly, and your hands will always be warm.

How to knit winter women's and men's double mittens with knitting needles? A few tips:

• If knitting is still difficult for you, then knit the inner and outer mittens separately.
• Knit the inner mitten first. Then create the elastic of the outer mitt and the front surface to the base of the thumb. Pull the outer mitten over the inner one, straighten your finger so that it is outside and start tying it - it will be more convenient.
• To prevent the bottom of the mitten from slipping, make a couple of stitches in several knitting points, and fix the details.
• For knitting the lower part of the mittens, use a thin yarn, and for the upper one - a dense woolen thread. As a result, mittens will turn out warm and beautiful.

Tip: You can link separate two mittens and then insert one into the other, connecting the bottom of the gum with a regular needle and thread or crocheting the edges. You can also tie with a single cloth, and then insert one part into another. A simple fold is formed exactly in the center of the knitted elastic band.

Classics of the genre - jacquard mittens for the winter in Russia. The knitting is double and dense, thanks to the interweaving of threads of different colors. The product will be warm, and hands in such mittens will never freeze.

How to knit jacquard women's mittens with knitting needles? Scheme:

Beautiful and very stylish pattern. The diagram shows all the colors of the threads used.

These mittens are knitted from only two colors of yarn, but how interesting they look.

The jacquard pattern "Owl" is stylish and fashionable.

Deer jacquard pattern. Only a real needlewoman can knit mittens with such an ornament.

Aran mittens look luxurious. Products with such a pattern are knitted for both adults and children. They are warm and beautiful.

How to knit women's long mittens with rhombuses and arans with knitting needles? Scheme:

Important: Maniches, snoods and hats turn out beautifully with such a pattern. Therefore, you can knit a whole set - elegant and stylish.

From mohair, you can knit warm downy mittens with knitting needles. You can use any pattern. Suitable "Scythes", "Arans" and others. Here are some sample knitting patterns for mohair mittens:

You just want to put on mittens with a snowflake and go for a walk in the cold, brushing snow from the branches of trees and shrubs. It is easy to knit such mittens: cast on 44 loops, distribute on 4 knitting needles, knit an elastic band 2x2 (7 cm) and a front surface of 7 cm. Next, a hole for the finger is left, as described above, and the knitting of the snowflake itself begins.

Below is a diagram and description of how to knit New Year's mittens for women with a snowflake. This pattern is also called "Norwegian":

The elegance of the hand, the uniqueness of the image, the gentle style - all this is emphasized by the "Princess" mittens. An interesting pattern, reminiscent of arana, will make the products original and beautiful.

So, we are learning to knit mittens "Princess" with knitting needles. Scheme and description:

Mittens model "Princess" can be associated with different patterns. For example, the picture "Owls".

The pattern with plaits looks beautiful on the mittens. Here is his knitting pattern:

The deer, like the snowflake, is a symbol of winter and the New Year. Therefore, for knitting sweaters, socks and mittens, a pattern depicting this animal is used.

How to knit men's and women's mittens with deer knitting needles? Schemes, description:

Here is another pattern for knitting a deer on mittens.

Tip: You can invent your own deer, draw a diagram yourself and knit mittens on it. Get a unique and original accessory.

Gorgeous and unusually intertwined harnesses on knitted things. Mittens with such a pattern will definitely pay attention. Such an accessory will add individuality and originality to your image.

Knitting mittens with plaits is easy. Below is a diagram according to which you can create the outer part of the mitten on two knitting needles. On the other two knitting needles, the inside of the product is knitted with the front stitch.

How to knit such patterns, it is better to see visually. The video tells in detail how to create an interesting accessory - mittens with harnesses.

Video: Knitting mittens with plaits Part 2 The main pattern.

Transformer mittens are convenient because when necessary, you can open your fingers without removing the product itself from your hand. In such gloves it is convenient to use a mobile phone in the cold. It is also comfortable to work, for example, for trade workers if their activities take place on the street. When you need to accept and count money for a purchase, it is enough to remove the valve from the mitten and your fingers will be free.

Tip: Transformer mittens for men and women without fingers with a folding top are easy to knit with knitting needles. For a woman, you can take yarn in delicate shades: beige, white, pink, and for a man - blue, black, brown.

Scheme and description:

Knit these mittens with regular front stitch. Elastic band according to the scheme 1x1 or 2x2. Below is a knitting pattern for transformer mittens.

Description of work:

The braided pattern looks unusual. If you knit mittens using Braids, you get a stylish accessory. Knitting such a pattern is easy - from the 9th row, the rapport is repeated.

How to knit braided mittens with knitting needles? Scheme:

Description of the knitting of this pattern:

Stages of work:

• First, knit 7 cm of elastic, dialing 36 loops and distributing on 4 knitting needles.
• Then, on two knitting needles, knit with a regular front stitch, and on the other two, knit with the Braid pattern.
• Leave a hole for the toe and knit to the beginning of the toe.
• Now begin to make decreases of loops, 2 on each knitting needle: on the first two, first knitting, and on the other two, at the end of knitting.
• When there is 1 stitch left on each needle, pull them off and fasten from the inside out.

Norwegian patterns are winter, Christmas trees, deer and snowflakes. Even if you knit only a snowflake, this will already be considered a pattern in the Norwegian or Scandinavian style. On mittens, you can create separately both deer, nature or snowflakes, or combine them in one pattern. Fantasy has no limits!

How to knit mittens "Norwegian patterns"? Scheme with description:

Important: When knitting such an ornament, it is important to be able to stretch the thread, because you need to constantly change the yarn of one color to another. Watch the quality of the broach so that the thread tension is uniform and the pattern does not lose its shape.

The broach process is performed as follows: straighten the knitted loops on the right knitting needle, pull the thread along them, and hold the thread with the index finger of the right hand, pressing it to the last knitted loop. On the wrong side, it is more convenient to press the thread with the thumb of the right hand.

Tip: Knit on RS and pull yarn in unused color so that it stays under the right needle. On the wrong side, knit with purl loops and pull the other thread with your left hand before work and under the right knitting needle. From the wrong side, the threads are pulled in front of the loops.

If you have learned how to stretch a thread of a different color, then you can start knitting Norwegian patterns according to any of the patterns. One cell in the diagram is one loop of a certain color.

Video: Knitting (mittens "Norwegian pattern")

This type of knitting can be done without broaches, but the fabric will be thinner than with broaches. Watch the video on how to knit jacquard without broaches.

Video: The easiest way to knit jacquard without broaches

How to knit mittens "Braid with a shadow": description

See how original these mittens look. Unusually, and few women knit like that. Make such mittens with your own hands and surprise your friends and relatives.

The pattern of knitting an Indian wedge on mittens with knitting needles:

• Knit the back side of the mittens as usual - with any pattern or just front loops. On the palm: 1st row- 15 front, from the 16th loop, tie 2 for the front and back walls, 4 front.
• 2nd row- 15 front, from the 16th loop, tie 2 for the front and back walls, 5 front.
• Knit in this pattern for 15 rows. with additions to the palm of the loops in each row. As a result, there should be 15 + 20 loops on the first two knitting needles.
• In the 16th row slip the finger loops onto the thread, knit in a circle and continue knitting to the required length of the mitten.

You have already knitted mittens with different patterns, but you want something unusual and original. Knit thick yarn gloves. It will turn out very interesting, and the products will be warm and comfortable.

How to knit warm women's and men's mittens made of thick yarn? To knit mittens from such yarn, cast on half as many loops as for knitting mittens from thin threads. But, in order not to be mistaken with the number of loops, you need to make some calculations:

• Knit with a pattern of 10 cm thick yarn and calculate how many loops you have in 1 cm of knitting.
• Now you know how many loops to dial for one mitten - 18-20 or a little more.

Important: Knit mittens made of thick yarn with simple patterns - front or back stitch, tangle, and so on.

If you know how not only to knit, but also to embroider, then you can create beautiful model mittens. Knit the mittens in one color and make beautiful embroidery on the back.

Photo of mittens with knitting needles with embroidery:

Knitted mittens with delicate embroidery: photo

Set - hat, snood and mittens with knitting needles: photos of models

Knit a set for yourself, your child or husband - a hat, snood and mittens. It will decorate any image, and things made by the hands of a loved one will warm in severe frosts.

Set - hat, snood and knitting mittens - photo models:

Beautiful products associated with the use of Arana and Braid patterns.

Set - hat, snood and mittens with knitting needles in pink: photos of models

A dark set created by knitting with a braid with a shadow pattern. It will look great with a coat or jacket in a contrasting color.

Set - hat, snood and mittens with knitting needles with an interesting pattern: photos of models

And again, a green tint - the color of the Christmas tree. Aranas and braids adorn the hat, mittens and snood.

Green set - hat, snood and mittens with knitting needles: photos of models

A gray set, but not at all boring, and even very stylish and interesting.

Gray set - hat, snood and mittens with knitting needles: photos of models

And again the “Braids” pattern, but the set is already knitted in beige. Classics always decorate and add originality to the image.

Set in beige color - hat, snood and mittens with knitting needles: photos of models

Knit things with your own hands. Please your family and friends. If you knit a set, then it can be a great gift, for example, for the New Year.

Video: MITTENS WITH SPOKES. CHILDREN'S MITTENS FOR THE AGE OF 2 YEARS. HOW TO CONNECT MITTENS OF ANY SIZE?

Knitting mittens: knitting based on a master class (photo)

Knitting mittens: knitting based on a master class (photo)

Knitting mittens is a simple and interesting task for needlewomen. You can handle it if you know what the different types of simple eyelets are.
In this master class, we knit mittens with knitting needles. For such a task, needlewomen most often choose circular knitting, known from our grandmothers. This technique involves the use of four working knitting needles and a fifth knitting needle, which is free. Before starting work, each needlewoman chooses patterns that seem easy to implement, thanks to which she will be able to knit beautiful, warm mittens in the shortest possible time.

What are the features of circular knitting

The very first and important task is to understand the features of the technique by which mittens will be knitted with knitting needles. For this, a video lesson is useful, supplemented by a detailed description of the needlework process.
The basis for successful work is assumed: it is customary to knit a mitten in a circle, trying to avoid the appearance of seams. The buttonholes should be evenly spaced on the four working needles. At the same time, keep the last, fifth, needle free, as it will at times be brought in to change the rest.
It is assumed that there are no edge loops. In this case, the front loops (LP) should be knitted for the upper parts of the created lobules when creating patterns, allowing the thread to work. Row (P) includes only those loops (P) that are knitted using working knitting needles. Wanting to facilitate the task, mentally put a number for each knitting needle.
Video: Circular knitting for beginners

Choice of model and pattern

Before starting work, decide on the visual design of the accessory and the optimal pattern.


Cuffs are traditionally knitted with an elastic pattern, but this stage promises to be simple even for beginner needlewomen.
What supplies of yarn will be required to create beautiful knitted accessories? The exact amount of yarn is determined by the size as well as the chosen pattern. For beginners, it is advisable to use the simplest patterns, because knitting mittens with knitting needles with an unusual pattern is not so easy. In most cases, forty to one hundred and fifty grams of yarn is required.
Before knitting, the number of loops is calculated. It is recommended to knit the first sample: approximately 14 P in width, as well as 10 R in height. Then evaluate the sample, as this will allow you to understand how dense the mitten can be. Wanting to facilitate further work, we knit a pattern for the elastic band of the accessory being created, since the cuff largely determines how tight the mitten will sit on the arm. In addition, it is recommended to knit a sample for the main drawing, because it will allow you to understand how worthy and correctly the needlework of a novice craftswoman will be done.
Take measurements of the parameters of the wrist and palm. All indicators should be recorded, as this approach will allow you to successfully adhere to the scheme of the creative process. Focusing on indicators, it is important to dial the optimal number of loops, which will be a multiple of four. Mittens are traditionally knitted from the cuff in a one-on-one or two-on-two pattern.
Video: Simple knitting mittens

Stages of knitting mittens

First stage

• sts are cast on the first two knitting needles. Subsequently, they will be divided into four parts, which should be the same. When knitting p-ki, it is necessary to create a vicious circle;
• how to close the circle? To do this, the ends of the threads of different glomeruli are connected to each other. According to this scheme, a square is created, which is the basis for mittens;

• items are removed from the free knitting needle;
• knitting is carried out without changing direction. The knitting needles should replace each other regularly;
• the main goal of the first stage is the creation of a cuff of mittens (about 7 centimeters);
• now allowed to do the main part. The instruction will allow you to knit warm mittens with a suitable pattern, but for beginners it is advisable to choose a simple option and gradually hone your needlework skills;

• the distance that extends between the cuff and the thumb will represent the pattern. Taking into account the difference in knitting techniques, it is possible to understand what possible nuances are best taken into account. If the pattern is narrow, add P on each knitting needle;
• after the mitten is knitted along the created line, leave a hole and proceed to the second stage of the needlework process.

The second stage The hole for the thumb always deserves special attention. The description of the task at hand involves two options for creating stylish holes. In the first case, the needlewoman's hole is left open, in the second case - closed:

After that, knit the mitten with the main pattern.
Stage three

The next step is to create the toe of the mittens. Needleworkers switch to a round or conical shape. To do this, at the end of the needlework process, the amount of P is reduced:

• rounded shape. Otherwise, the pattern will be broken and a beautiful accessory for the winter will remain a dream. To decrease P in a rounded shape, they act in this way: on each working knitting needle, the first two P-ki are knitted. At the same time, focus on the front, main, side and bottom of the created slices. In each P, the number of Ps is reduced to the remaining two last Ps on each P (total number of Ps - 8).

How can you get a pointed end on a mitten? The first two Ps from each knitting needle must be knitted together with the front. In this case, the following scheme is executed: on the 1.3 knitting needle, the loops are supposed to be tilted to the left side, on the 2 and 4 - to the right side.
The fourth stage Description of the creation of beautiful winter mittens is impossible without knitting a thumb. To do this, use only three knitting needles, dividing the entire P number by only 3. After watching the video tutorial, you can understand that you should not be afraid of the final stage. Everything will be easy:

• what to do if the loops were removed on a pin? Now the P should be removed on the knitting needle. At the same time, for the loops of the upper R, you need to dial new ones. It is recommended to add two side P. You need to act in a circle, reaching the nail. Only after that P is gradually reduced. The remaining 6 P are collected on a thread. Purl fastening is supposed;
• the second method involves pulling out a colored thread. We collect open P on knitting needles. Depending on how wide or narrow the hole for the thumb turned out to be, you can rip off or add P.

You can knit stylish and warm, comfortable mittens with knitting needles with five knitting needles, because this option is classic and the video will prove the ease of completing the task.

Photo master classes of knitting mittens

Video: Mittens with a beautiful pattern

Comments

related posts:

Knitted mittens based on the master class (photo and diagram)

Knitting step by step openwork mittens on knitting needles

Knitting step by step openwork mittens on knitting needles

The times are returning when things, connected independently, were of great value. Openwork
come in handy not only in winter, but also in early spring.

We knit openwork mittens

Work with a detailed description is presented for size 7. Abbreviations: For convenience of description, the following abbreviations will be used: persons. - facial loops, out. - purl, p. - loops. To make one pair of openwork mittens you will need:

• 100 grams of thread with a density of 50g/125m;
• knitting needles, which are presented in a set of five pieces, No. 3.5;
• an additional device for removing loops where the finger will be.

Left mitten

Initially, for openwork mittens, 48 ​​loops are cast on and evenly distributed (it turns out, 12 loops each). Knitting closes in a circle. Further, for 35 rows (circles), the mitten is knitted with an elastic band. Here you can act at your discretion and knit in various ways. Gum patterns are completely different, here are the two most common:

• method 1: the elastic band can be knitted 1 person., 1 out.;
• method 2: second embodiment: 2 persons. and 2 out.

Advice! For those who like tighter mittens, you can make the elastic a little longer, 35 rows is not a prerequisite.
After the elastic of your openwork mittens is finished, you should proceed to the main part of the product. The loops on the 1st and 2nd knitting needles are knitted throughout the entire knitting. satin stitch, and on the 3-1 and 4th - with an openwork ornament.
Possible patterns
Legend:

• ᴏ - yarn;
• - out. P;
• □ - persons. P;
• / - 2 sts are knitted together with a slope to the right;
• - 2 p. together are performed with an inclination to the left.

Patterns are repeated until the product is the desired length. The result is a back side with a beautiful ornament, which you can choose yourself.
At a height of 6-7 cm above the rubber band, it is necessary to make a hole where the thumb will be. It will be on the third needle. 3 p. knit persons. stitch, then 7 p. is removed and set aside. For further work, new 7 p. are recruited and the remaining 2 loops are knitted. satin stitch. Knitting to the end of the circle remains unchanged.

After the necessary hole is left behind, work continues as before: 1 and 2 knitting needles - with an ornament in accordance with the diagrams, 3.4 - with front stitch. When the desired length of the product is reached, you can begin to make a neat toe.
The first three circles remain unchanged. Then you should carry out the decrease on the knitting needles:

• on the 1st: 1 p. is knitted by persons. with a slope to the left, 2 p. as one with a slope to the left, which remains to be done with an openwork ornament;
• on the 2nd: the loops are knitted in a pattern until there are 3 sts, then 2 sts are performed together persons., 1 persons;
• 3rd knit like 1st, and 4th like 2nd.

The decrease, thus, is carried out until there are only 2 p. The remaining 8 p. are pulled together with a thread, which is fixed from the inside.
Right mitten Her knitting takes place in a mirror image to the previous one. The difference is that the pattern will be located on the 3rd and 4th needles, and the finger hole should be made on the second from the side of the palm. For this, 2 sts are knitted, 7 are removed on an auxiliary pin, 7 sts are cast on a working one, the remaining 3 are knitted with a front stitch.
Thumb
To knit the thumb, you need to enter the remaining 7 sts into the main work, dial 3 sts from each side and 7 sts from the opposite side. Then they are divided into 4 working knitting needles (it turns out 5 p.).
Knitting openwork mittens is carried out in circles. n. 5 cm before the end of work, you should start decreasing. To do this, on each knitting needle, two loops are first knitted together. The decrease is carried out in each subsequent row. The decrease is repeated until there are 8 p. (2 each).
The loops that remain are pulled through the thread, which is fixed on the wrong side. Well, that's all, fishnet mittens are ready.
In conclusion, it is worth noting that you can use patterns on mittens at your discretion. The main thing is that the report should not be more than half of the loops cast on.

Video: Openwork knitting mittens

A selection of master classes on knitting mittens

Comments

related posts:

The grid pattern in diagrams and photos, its detailed knitting
We knit on knitting needles a beautiful hat with kosapi according to photo and video MK