Do-it-yourself ribbon choker. Do-it-yourself choker around the neck: made of velvet, satin ribbon, lace, beads, fabric and leather. How to make a pendant choker? Video how to weave a choker tattoo from small beads

Collars are different. If a tattoo choker is firmly associated with shocking and rebellion, then an elegant velvet on a lady's neck or a ribbon choker is stylish and very fashionable. What is important - the neck choker is easy to make with your own hands. Explore the choker making tutorials presented in this article and create jewelry that will highlight your personality.

How to make a velvet neck choker?

Perhaps this is the simplest choker of all options

Materials and tools

• velvet ribbon 50-60 cm long. Can be purchased at craft stores

Tip: If you prefer velvet with a tight hold, buy an elastic velvet ribbon.

• end caps - special fasteners for the ends of the tapes - allow you to beautifully and accurately cut sections without resorting to glue or a needle. As a rule, such accessories are sold in stores with materials for needlework / jewelry
• pliers and scissors

Manufacturing instructions:

1. Cut the required length of tape
2. Lock the limit switches

Wear a choker while tying beautiful bow behind

How to make a black velvet neck choker?

Materials and tools

• velvet ribbon
• limit switches
• connecting rings
• chain clasp to help adjust neck circumference
• pendant or medallion (optional)
• pliers and scissors
• sewing needle, sewing thread (to match the ribbon)

Manufacturing instructions

1. Measure the volume of the neck (OS). For example, the OR was 33 cm

1. Assemble the castle. Using the connecting rings, attach the end switches to the lock. You should receive an assembled velvet fixation element
2. Lay out the resulting mount on any hard and even surface. Measure its length (DZ). For example, the length of the assembled fixing element (see photo) is 3 cm

1. Taking into account the length of the fixing element, the net length of the tape (BL) should be

BH=OSH-DZ or BH=33-3=30 (cm)

1. Be sure to make allowances for attaching the limit switches (1 cm on both sides). As a result, the length of the tape will be 30 + 2 = 32 cm
2. Cut the required length of tape. If you plan to decorate the choker with a pendant that has a special eyelet, put it on a ribbon
3. Lock the limit switches
4. If the pendant/pendant/medallion you have chosen does not have an eyelet, sew or attach a decorative element using a connecting ring (previously marking the middle of the ribbon)

Fashionable choker necklace is ready. This choker can be worn both as a daytime accessory and as an evening accessory.

Choker design option. In the manufacture were used: velvet ribbon (width - 1.5 cm); pendant with a wide eye (the color of the stone matches the color of the ribbon); lobster clasp with adjustable chain
Choker design option. In the manufacture were used: velvet ribbon (width - 1.7 cm); cabochon pendant ( handmade) and a drop-shaped glass bead; lobster clasp with adjustable chain

How to make a choker with your own hands from satin and velvet ribbon?

Materials and tools

• velvet/satin ribbon 50-60 cm long
• limit switches
• large connecting ring (the diameter of the ring must exceed the width of the tape by 1 cm)
• pliers and scissors
• fabric glue

Manufacturing instructions

1. Lay the tape on a flat, hard surface.
2. Cut into two equal halves
3. Place the connecting ring over the middle incision

Connection ring location

1. Wrap the free ends of the tape, forming loops-holders for the ring. Fix loops with glue

Tip #1: If you don't have special glue on hand, don't despair. The loops can be secured by making a few neat stitches with a needle and thread.

Tip #2: If the needle and thread stitches are not yours best friends, decorate the edges of the tape with beautiful trailers. Be sure to make sure that there are loops on the limit switches for attaching connecting rings. Fix the ring with connecting rings

Unusual idea: a transparent choker with a ring looks interesting

To make such a necklace, use silicone straps that are suitable for the width. You can buy them in stores with materials for needlework. Secure the ring with rivets. The choker is fixed on the neck with ordinary buttons. Rivets and buttons will help you to install in the clothes/shoes/bags repair shop

How to make a velvet black choker with a pendant? DIY pendant choker

Agree, it is the pendant that determines the nature of the choker.

suspension can

• buy in a jewelry store if you like expensive jewelry
• buy in the "All for jewelry" department if you prefer a democratic style
• find at a flea market or in an antique shop (for lovers of jewelry with history)
• do it yourself. Handmade pendant is a great way to stand out from the crowd and even play a little trick

To make an original choker pendant, you will need

• a tin bottle cap (for example, a beer cap). The lid must not be deformed
• decorative elements: beads, beads, stone chips for jewelry, cords, etc.
• fast drying adhesive. In this case, it is convenient to use a glue gun, which you can buy in the departments of building materials
• wire for jewelry (5 cm) or connecting ring
• pliers
• file

Instructions for making a pendant for a choker

1. Using an awl, make a through hole in the side of the lid
2. Sand metal burrs with a file
3. Form a loop out of the wire using pliers. If you choose to use a connector ring, skip this step.
4. Fix the loop in the opening of the lid / insert the connecting ring

Tip: You can also paint the outside of the lid at this stage. acrylic paint

1. Decorate the pendant with decorative elements and glue. In the case of using sequins or drawings/photos to decorate the pendant, use clear epoxy for jewelry and jewelry to fill in the void and create a protective screen

How to make a black choker tattoo

The tattoo choker stretches well, so there is no need to use a special lock for the choker. Many chokers secure the last knot in the first loop of the snake. Such an ornament is put on over the head

If there is a need to adjust the length of the jewelry, use jewelry locks with chains and special ends for decorative cords

How to make a beaded choker tattoo?

Beaded choker tattoo combines elegance and originality

An easy way to make a beaded choker tattoo

1. Take two strong threads (fishing line) of 1.5 m each
2. String beads on each of the threads
3. Tie a choker using beaded threads instead of spandex (you can find a knitting pattern in the section “How to make a black choker tattoo”)

Advice. A beaded tattoo choker should be decorated with a special lock-lock

Beaded choker tattoo (patterns)

For beginner needlewomen, these are suitable simple circuits

The technique of weaving from beads is quite simple, and the techniques are repeated. After reading the description of the work according to the first scheme, you can easily create many beautiful accessories.

You will need

• fishing line for beading - 3 m
• large beads different shapes and colors (blue hearts or other curly beads - 10-15 pcs, round blue beads - 2 pcs., round brown beads - 2 pcs.)
• clasp for jewelry
• scissors

Manufacturing instructions

1. Put a fastener lock on the fishing line, fasten it in the middle of the fishing line with a knot. So you get two working threads of the same length
2. String blue and then brown beads on both strands
3. Divide the threads and string 9 beads on each
4. Connect the threads and string a curly bead (heart)
5. Continue knitting, alternating steps 3 and 4
6. As soon as the choker reaches the required length, string first brown and then blue beads on both strands
7. Secure the lock ring with a double knot. For reliable fixation, tuck the ends of the fishing line into a figured bead.

The third scheme can be tricky because it uses a parallel weave technique. More detailed diagram technology is shown below.

How to make a beaded choker: weaving pattern

The scheme of a beaded necklace, presented below, is for experienced beadworkers. However, for the sake of such beauty, it is worth a little work.

How to make a lace choker?

1. Buy a lace ribbon of the required length. How to determine the length of the ribbon (lace or velvet) is described in the section "How to make a black velvet neck choker?"
2. Fix the end caps, attach a jewelry lock or sew on buttons

The decoration is ready. If desired, the choker can be decorated with beautiful beads or a medallion.

How to make a white lace choker?

Delicate choker will fit well into the summer wardrobe

1. Cut the lace to the desired length

1. Fasten the limit switches

1. Attach the connecting ring and lock

Your decoration is ready

How to make a black lace choker?

Making this choker will take some effort, but look how beautiful this accessory is!

Materials and tools

• black felt (for flower)
• black lace ribbon (choker base)
• thin red braid (for decorating the base)
• black braid 1 cm wide (for ties and cuts)
• black chain (for decoration)
• scissors
• pins
• needle and thread

Manufacturing instructions

1. Make a template for a flower

1. Cut out from felt

• 6 elongated elements (for petals)
• 2 circles (for the middle)

Fold the elongated elements so that the lower part is slightly longer than the upper, and secure with pins

1. Take one of the blanks for future petals and lay a stitch along the fold line

1. Tighten the thread a little: a small wrinkle will form on the fabric. Without breaking the thread, do the same manipulation with all the blanks

Velvet is elegant women's accessory which is worn around the neck. It is a velvet ribbon or ribbon decorated with a medallion, rhinestones, pendant or other decor. At the back, the product is tied with an intriguing bow. Today, a stylish velvet - original decoration for a woman who appreciates, in addition to products made of precious metals, also unique crafts.

Velvet history

The origin of this product dates back to the 18th century. Queen Alexandra of England, wanting to draw the attention of others to her thin snow-white neck, put on a black velvet ribbon. The ladies of the court appreciated the original accessory, which can favorably emphasize the elegance of the neck of its owner. French women preferred to wear beaded and velvet velvet. At that time, jewelry made of lace was considered more elegant. An exquisite accessory was sometimes complemented by a medallion or a fashionable pendant. If earlier it was exclusively black, now you can purchase or sew your own velvet fabric of any color scheme, depending on the chosen style and individual preferences.

Pre-measuring

Velvet is designed to hug the neck. We measure the circumference of the neck with accuracy, then mark the required segment on the selected material. Additionally, we add free fifteen centimeters so that the accessory can be tied with a bow at the back.

Making velvet

Feminine and elegant looks velvet, sewn from a ribbon. As an original and delicate addition to the decoration, we take lace and sew it onto a ribbon. In addition to lace, organza is successfully used as an original addition. To make the organza ribbon more voluminous, we sew it, and then pull the thread. Next, sew it to the velvet. If desired, we immediately sew an accessory from a lace ribbon. To create the effect of volume, we harmonize the lace with an accordion.

Decor for velvet

First, we mark the middle of the product, determining the place for attaching the selected decoration. I can be gentle artificial flower, stylish medallion, jewelry, exquisite pendant, bead weaving, rhinestones or bow. We place the selected element in the center of the velvet, sew it firmly and neatly.

What to wear with an accessory

Velvet looks advantageous in tandem with a dress that has plunging neckline. In this case, the decoration will add grace and glamor to the image. It is advisable not to combine earrings with massive velvet. A set of velvet and earrings in the same style will look stylish. The ideal option is when it is the decoration on the neck that dominates and attracts more attention, since a few catchy jewelry looks vulgar. A velvet with a short or high hairstyle looks better - a haircut and tied hair.

The fashion for jewelry is constantly changing, during its existence, velvet has repeatedly gone out of fashion, then again became the highlight of the season. The specificity of jewelry lies in the existence of an individual meaning, a riddle, they are a part of the owner's personality, a manifestation of his individuality. Using our instructions, you can quickly and effortlessly sew your own unique and inimitable accessory!

http://cs402220.userapi.com/v402220939/5a89/ek9RPGKriM4.jpg

How to apply makeup.

To mask dark circles under the eyes, we will use the corrector, he ()

How to apply makeup.

To mask dark circles under the eyes, we will use a corrector, it should be a couple of tones lighter than your skin. When buying a corrector, apply a little on the wrist, if the veins become invisible, then this is your tone.

For an expressive relief of the face, you can slightly highlight the cheekbones, nose and oval of the face. With the help of powder, you will finally mask all the imperfections and remove the unpleasant shine of the skin. Powder should be applied not with velvet, but with a special brush, then you will avoid over-powdering, which will give your face an unnatural whiteness.

To make your face brighter, use blush. With a brush with blush, lightly touch the highest place on the cheekbone, then with a clean brush spread the blush over the entire cheekbone, so that the color is the most saturated at the point of contact, and closer to the chin it merges with the main tone of the face.

We pass to the upper part of the face, give expressiveness to the eyebrows, eyes and lips. Eyebrows are tinted with a pencil or several shades of shadows. The movements should coincide with the direction of hair growth on the eyebrows.

We perform eye makeup in a classic style. It is known as "Smoky eyes", and it makes eyes look like a cat, which is very popular with men. With a black or brown pencil, draw a thick line along the upper eyelid as close to the eyelashes as possible to avoid gaps. With the help of feathering, make the borders of the line not so clear. Next, we apply shadows, but in such a way that the color near the eyeliner is more intense, and as it moves away from it, it becomes less pronounced. With the correct application of the shadows, you should get a “light haze” effect. Color your eyelashes with black mascara.

When applying lipstick, remember that it should not go beyond the natural contour of the lips. In this way, you will not increase the lips, you will just look ridiculous.

0

0

0

Rules of care: - Gently wash leather shoes with warm soapy water, trying to wet it as little as possible, dry it and lubricate it with glycerin. - white shoes it is better to wash with a soft foam rubber sponge in a weak solution washing powder. - Improve appearance leather can be wiped with a cloth dipped in turpentine mixed with a few drops of milk. After that, cream is applied and polished. - Grease spots remove from the skin with a solution of soda, diluting 1 teaspoon in half a glass of water. - Add shine leather shoes you can wipe it inside banana peel, and then velvet. Care for artificial leather shoes. Shoes made of synthetic materials - a good choice for cold and rainy weather, but provided that it does not get wet and allows the leg to "breathe". Care instructions: - Wipe artificial leather shoes with a clean, damp cloth or a soft silicone sponge. - Do not apply cream on artificial leather shoes, and do not use a brush.

0

0

0

SHOE CARE
Unpleasant odor from shoes can be eliminated with hydrogen peroxide by wiping the inside of the shoes with a cotton swab moistened with it. For the same purpose, a solution of potassium permanganate is used.
Formalin is used to disinfect shoes: the shoes are wiped inside with a cloth moistened with formalin, and placed in a plastic bag, tied and left for a day. Then the shoes are taken out and aired.
Suede shoes clean well if they are held over steam and then brushed with a special brush. If suede shoes is heavily soiled, then it is cleaned with soapy water with the addition of ammonia. After cleaning, it is desirable to treat suede with a water-repellent preparation.
If the shoes are tight, you need to pour a little cologne, alcohol or table vinegar into it. After that, the shoes will take the shape of the foot, and the skin will become softer.
If the shoes are tight in a particular place, it should be dripped with heated wax or paraffin and pulled over the block for several days. The desired dough will stretch noticeably.
If the shoes are too big and "pop" on the feet, you can glue a strip of foam rubber on the heel.
New, just bought leather shoes should be smeared with cream, allowed to soak in, dry, and then polished with velvet.
If the shoes cannot be made shiny, you need to wipe it with a slice of lemon and polish it with velvet.
So that the shoes do not creak, you need to soak the sole with hot natural drying oil or grease with linen or castor oil.
If in hot weather new shoes "burn" your feet, you can wipe them from the inside with three percent vinegar.
So that the shoes do not get wet, you can treat them with the following solution: dissolve 40 g of fish oil, 10 parts of wax, 3 parts of turpentine in a water bath. Apply the cream in liquid form.
shriveled sports shoes can be kept in warm water until the skin becomes soft. Then you need to wipe it inside and out, dry it, grease it with glycerin and stuff it tightly with newsprint.
In warm weather, it is better to use emulsion creams for shoe care, which dissolve well and allow air to pass through, and in winter - organic solvent creams (they provide an air- and waterproof film).
Dried shoe polish can be restored by adding a few drops of turpentine to it and gently warming it up.
Shoe brushes are useful to wash with water with the addition of ammonia.
To soften the leather of shoes that have not been worn for a long time, you need to generously rub it with castor oil and let it soak in.

Story women's jewelry would be poor without it elegant accessory like velvet around the neck. This product, originally made of black velvet, sets off fair skin. Essentially a tight-fitting collar. Back in the 18th century, the Queen of England was able to draw attention to her person with the help of velvet. Today, the fashion for sophistication is back. Such an accessory is made by themselves to make their image exclusive, or they are purchased ready-made. It is also a great gift, its production will be affordable.

Velvet around the neck: photo

Velvet around the neck: the main thing is the idea!

Velvet around the neck can be created with your own hands. The main thing is to decide on the concept. If this is a future surprise for a friend, it is better to find out in advance what style of clothing she prefers, what evening dresses she likes.

If she likes Long Dresses in the style of a vamp, a bohemian version of the neck accessory will do. But if a girl is a fan of gothic or punk rock, you can play a little tricky in performance and add elements in the form of skulls or black roses instead of beads.

For inspiration, it is worth looking at ready-made velvet ties around the neck. Photos from the Internet or fashion magazines will help.

It is necessary to take into account the manufacturing features:

Is the neck beautiful? For young women with a swan neck, this accessory will come in handy. On mature ladies, it can look advantageous if well-groomed and without wrinkles.

The neck in this regard is the main "traitor", telling about age:

Velvet looks good in an ensemble with an open neckline and a high or gathered hairstyle.

• Such an ornament does not require other massive products on its owner. Large earrings or parallel wearing of beads, chains with velvet - mauvais ton, as true ladies would say (speaking in Russian - a sign of bad taste).

With everything else, you can agree or not. The material (velvet, silk, organza, lace, even kitchen tulle) is selected in accordance with the taste and preferences of the woman. Decoration (rhinestones, beads, pendants, pendants, medallions - with the image of flowers or a photograph of a loved one) is also carried out according to the principle of originality and wishes.

Do-it-yourself velvet on the neck: the technology is simple

Velvet on the neck is performed in 3 stages.

Measurement of neck circumference plus 15 cm in stock for tying a beautiful bow.

The braid prepared in advance can begin to decorate. But a silk ribbon, velvet or satin, can be folded (the width of the accessory is not critical), and then sewn. This is how the foundation is made.

From above (if desired), an organza or lace folded with an accordion is applied.

Some prefer, on the contrary, to sew a braid or velvet ribbon on a lace background.

Sometimes it is advised to take a lace ribbon and thread a thread through the entire length (in the middle). When you pull on it, a gathered wide piece of fabric is formed. It is sewn on the resulting "belt":

A pendant or a decorative flower is attached in the middle (from velvet pieces of the remaining material, leather, from half a leather zipper twisted by a flower).

1. Final touches. You can leave a satin "collar" with a large medallion in the middle. Who does not like minimalism, the option is to decorate the accessory with small beads, feathers, even a small teddy bear!

Velvet should correspond to two parameters, except for the size of the neck - this is harmony with the main toilet (dress, corset) and with the internal state. Everything else is room for imagination.

All women without exception love beautiful jewelry. And those who claim the opposite simply do not want to admit it to themselves. After all, it is bracelets, pendants, necklaces and other charms that can cheer us up, women, create a unique image and even tell a little about our character and tastes.

If your best friend and maybe even sisters birthday then best gift- this is a trifle made with your own hands from a pure heart!

My master class will help you create an original youth decoration - velvet on the neck. And it is quite possible that you decide not only to give such beauty to your girlfriend, but decide to wear velvet yourself, as I do!

For work we need:

- scissors
- polymer plastic (Cernit, Fimo or any other)
– thick denim, white and crimson cotton fabric
- threads
- leather lace

First you need to draw on denim a rectangle about 20-22 cm long and 2.5-3 cm wide. It is important to cut the fabric so that the threads protruding along the edges form a fluffy edge. Then, with scissors, pull the thread along the fabric by 3-5 mm. As a result, we get denim stripe with soft fluffy edges.

Then measure 1 cm from each end of the strip as shown in the image and fold it up, creating a loop through which you will thread the leather cord. Secure the buttonhole by sewing the place with threads by hand or sewing on a typewriter. Tie the lace itself and cut off one of the ends.

Cut out petals from pink and white fabric. The elongated or droplet shape looks more pleasant. Petals need to be sewn on a typewriter or manually stitched along the cut line. This will strengthen the fabric and create a contour beyond which the fabric will not stick out. Then the petals should be sewn in the middle of the denim strip, forming a flower. If desired, you can decorate the flower with acrylic paint, painting it with dots or ornate stripes.

Now you can take on the plastic. Colors can be any, but crimson and white plastic are most suitable for raspberry and white fabric. From white plastic, roll the base ball in your hands. Then roll 6-8 pieces of tiny beads from raspberry plastic. Put the white base on a toothpick and carefully glue the small raspberry dots on the sides. Press them down a little to make them stick tight. Three of these balls is enough. When they're ready, drop your masterpieces into boiling water to brew polymer plastic or bake them in the oven.

Sew the finished bead in the middle of the flower. The principle here is the same as with buttons - thread the needle into the hole. Then take a piece of leather cord and thread it through the same hole. Decorate the ends of the lace with the remaining two beads and tie the ends of the lace into a knot to fix it in one position.

Well, what else is there to say? Our wonderful gift velvet on the neck- ready! The main thing to remember is that velvet will not decorate any neck. She can visually shorten the neck, so you should make sure in advance that such jewelry suits your girlfriend.

Ksenia Petukhova