Race car made of paper. Origami car made of paper: interesting models for a kid. How to fold or assemble a paper police car using origami: a simple diagram and drawings

Origami machine is one of the most popular paper origami. If you do not know how to make an origami car, then on this page you will find everything you need to assemble this simple paper figurine.

In the first photo you can see what you get if you follow the assembly diagram below. The second photo of the origami machine was taken by one of our site users. He got a yellow convertible. However, it can hardly be called origami, as it is made using scissors. If you have photos of the origami you have collected, send them to the address This address Email protected from spam bots. You must have JavaScript enabled to view.

Assembly diagram

Below is an assembly diagram of an origami machine from the famous Japanese origami master Fumiaki Shingu. If you strictly follow the instructions, then assembling the origami machine will not take much time, and the result will be the same as in the picture. After doing what is described in the diagram several times, you will understand how to make an origami machine quickly and without peeping into the diagram.

Assembly instructions

1. Fold a square piece of paper in half. Bend the fold well in both directions.
2. Fold half of each half towards the center. Also bend the bend well in both directions.
3. Bend the corners in the opposite direction so that you get four identical right-angled triangles.
4. Bend the right corners of the triangles a few millimeters - these will be the wheels of our origami machine.
5. Fold the sheet in half and fold inward one of the right corners of the top of the rectangle.
6. From the side of another right angle, make a small oblique incision and bend the incised part inward.
7. The car is ready.

If you have any difficulties during the assembly of origami, then we advise you to watch our video master class, in which we assemble a similar figure according to the same instructions.

Videos master class

Assembling an origami machine for beginners can seem like a daunting task. Therefore, we advise you to enter the query "origami machine video" on the largest video hosting site on the Internet, YouTube. There you will find many different videos about the origami car, which clearly show the steps for assembling the car. We hope that after watching the video of the assembly master class, you will have no more questions on how to make an origami machine.

And here is a video in which you can see how to make an origami machine, which many people do at school:

And this video tutorial tells how to make a very realistic car out of paper:

Symbolism

The car is a traditional symbol of personal independence, freedom of movement. This is the personification of technical achievements, speed. Often the car is associated with sportsmanship, victory.

Traditionally, it is believed that doing various types Needlework from childhood should girls. But this is an erroneous opinion, since the manufacture various crafts, drawing, creating panels and other types of creativity develop imagination, fine motor skills, help children learn about the world around them and instill a love of art, all depending on the gender of the child. Of course, it can be more difficult to get boys involved in such activities, but even they can be interested in needlework.

For example, great option will invite the child to collect a collection of origami cars from colored paper. He will definitely appreciate the opportunity to fold the model he likes in any color, especially since in the future you can play with such paper cars in the same way as ordinary ones. Following step by step instructions and diagrams, even novice needlework parents will be able to explain to the baby the principle by which the origami machine is folded.

One of the most popular car models in this technique is the origami racing car. The MK below is suitable for school-age children, since it is necessary to carefully monitor the sequence of folds in it.

Detailed master class with step by step description assembly of this model with a photo. Take a sheet of A4 paper and fold it in half lengthwise. Now we create exactly the same folds for the strip as in the diagram below. A double triangle should form on each side of the strip.

Next, along the folds, we fold the ends of the paper blank so that two triangles are formed with the vertices outward. Here we bend the side strips along the lines to the center. Now the corners of the workpiece are bent to its center line.

At this stage, you need to be especially careful. We connect the points along the arrow in the diagram, while inserting the corners into the pocket formed at the bottom of the workpiece. After these manipulations, the origami machine should look like this.

Now we mark the folds along the lines. We mark three more folds on the back of the machine.

We bend all the details of the origami machine in the right position.

In the end, you should have something like this racing car.

If you find it difficult to navigate the graphic assembly diagram, we advise you to watch the video with a step-by-step explanation of each step.

Video: Making a racing paper car

simple origami car

We offer another, easier master class, which is ideal for beginner needlewomen. Such a machine can be made immediately from colored paper or painted after.

Instructions on how to assemble a paper model of a car with your own hands. Fold the square sheet in half. Now we unfold the sheet, and bend its edges to the resulting fold in the center.

Again we bend the edges of the sheet, but in the opposite direction. And fold the paper in half. We turn the workpiece over and outline two oblique folds, as in the diagram, and then bend the resulting triangles into the workpiece. Such an origami car body should come out. We also bend the triangles sticking out from below inward.

We bend the sharp corners of the wheels back to give them a more realistic shape and stability. At the same stage, we form the back of the origami machine by bending the corners on its right side inward as follows. We bend the corners on the other side of the machine to form headlights. Let's fix those corners. In the end, such a car should turn out.

From paper, you can make figures and models of any complexity. For example, large machines can be assembled using the technique modular origami or pre-cut templates. With these methods, you can create a fire truck, motorcycle or boat. And various photo and video tutorials explaining the assembly process will help you and your child bring such ideas to life.

Video: Origami toy car

We add volumetric cars from modules according to video lessons

Origami is the real art of creating various figures using a regular sheet of paper. From this, it would seem simple material you can create whatever your heart desires, including cars. Moms of little boys can create a real collection of cars of the most different forms and sizes. Kids will appreciate such toys, and the process of their creation will captivate and interest them for a long time. Such crafts will bring a lot of joy to children and at the same time help to significantly save the family budget so that every time during a shopping trip the child does not ask new toy. An origami machine is made of paper according to the scheme quite quickly and simply, you only need a little desire and patience.

racing cars

If earlier various animals, birds and flowers were made of paper, today there are a large number of schemes for creating cars for every taste. These can be flat or three-dimensional figures, very accurate or simply schematic models.

Note. Cars are made from A4 paper, and the process takes only a few minutes.

A very easy-to-implement scheme of a racing car:

1. A sheet of A4 paper is taken and folded into two even parts lengthwise.

1. On one side of the sheet, it is necessary to make a bend at an angle of 45 degrees, walk along it well with your hand and unbend the paper back. The same must be done in the other direction and unfold the sheet in the same way so that the lines remain.

1. From the other edge of the paper, the same actions are taken so that the workpiece looks similar on both sides.

1. After that, one of the sides is taken and reduced to the center. To do this, take the edges of the paper in the middle between the folds and bend these two parts. On the other hand, do the same with paper.

Related article: The scheme of weaving beaded necklace "Andromeda"

1. The edges of the resulting arrows are slightly raised and the edges of the paper are bent towards the center, while dividing each side in half. First, one edge is bent, and then the second.

1. When the paper is folded on all sides, the paper is ironed well and then the arrows are lowered from both sides to make it look like it is shown in the photo.

1. The blank for the future machine is already ready and now it remains only to make a few final touches. The front part is formed from one side of the paper - one and the second part of the “arrow” is bent inward.

1. The resulting workpiece must be bent in the middle.

1. We bend the workpiece to the end and fill the arrow into the arrow.

1. The paper car is almost ready to make it attractive, it is best to bend the back up to make a spoiler, and from the curved ends of the arrows we form the car fenders.

Such a beautiful and original racing car, any boy will definitely like it. It is very easy to make, and with the help of paints, felt-tip pens and pencils, you can decorate it the way the child wants it. By making several of these cars and painting them in different ways, the guys will be able to create a real and diverse collection.

You can understand the technology of creating paper cars with the help of a video where all the actions are clearly and step by step shown. How to create just such a racing car, you can see on the video:

The boys are interested not only in the race and everything connected with it, but also in other car models. Having mastered the most simple and complex techniques origami, you can create a real and quite diverse collection of cars.

From a sheet of paper, you can create another model like this:

Using this simple scheme, you can create various cars by simply adjusting its shape a little. Trucks and patrol cars, minibuses - all this is done quickly and easily, you just need a little imagination and desire.

One of the most exciting leisure activities is doing crafts. A special type of needlework that both adults and children like is paper designs. Origami paper machine is the most popular variety, familiar in most cases to the male population of the planet.

There are many options for paper machines, ranging from the simplest configurations to 3D models. This will require a minimum set of necessary things. As a rule, this colored paper, cardboard, scissors and glue. In more complex designs, auxiliary elements are used in the form of toothpicks (axles for wheels), plastic bottle caps, and much more.

How to make simple origami paper cars?

All you need is an ordinary A4 sheet and a little time.

• Fold the sheet in half lengthwise. Then bend the resulting corners at an angle of 45 degrees. The corners are bent on both sides. You should get bends resembling arrows.
• Bend the side elongated sides to the middle. The edges of the previously obtained arrows should cover the curved sides.
• Then bend one of the sides together with the arrow to the other edge, and tuck one arrow into the other.

Now, following the diagram, it will be easy to assemble an origami race car out of paper. You can color it however you like.

Average level

For more complex designs, a diagram and detailed instructions are provided. As a case, you can use a finished cardboard box. The size of the machine directly depends on the dimensions of the box.

1. Draw doors on the sides of the box and cut out window openings.
2. The doors are cut in such a way that there is some margin next to the hood.
3. Wheels are also made from cardboard by cutting out circles from it. For greater strength, you can prepare several circles at once and glue them together. Make holes in the center, into which the axles will then be inserted.
4. Holes are made in the lower part of the body, axles are inserted (skewers, toothpicks, and so on) and wheels are put on them.
5. For the windshield, you can use the usual plastic bottle. A hole is cut in the front of the structure for Windshield, and the plastic is fixed with adhesive tape.

Intermediate level - option number 2

How to make origami paper cars using improvised materials?

In the previous version, skewers, scotch tape and a plastic bottle were additionally used.

For a simple racing model configuration, you can use a cardboard base from under toilet paper. The same roll will serve as the basis for the wheels.

1. The surface of the roll is cleaned of glue.
2. Next, small holes are made in it for skewers, on which future wheels will be strung. They are cut separately.
3. The side holes in the roll are sealed with cardboard circles, sizes corresponding to the holes themselves.
4. The base is painted suitable color, and a hole is cut in the upper part for the driver's seat. It can be either oval or round.
5. The resulting cardboard cover can not be thrown away, but made into a seat by attaching it to the body with adhesive tape.
6. Attach wheels.

We made a retro model of a sports car.

Retro cars

In order to make a classic passenger car, we need:

• paper;
• scissors.
• The sheet must be square shape. It is folded in half on one side and in the same way on the other, so that folds are obtained on the unfolded sheet, dividing the sheet into four equal squares.
• Fold the bottom half in half so that the edge touches the center. On one side, bend the edges so that you get a triangle.
• Cover the resulting shape from above with the other side to the middle of the sheet, and bend the edges in the same way as the other half.

You can build a hatchback model.

• Take paper of any color square shape. Fold it in half.
• One third on both sides is bent to the inside of the sheet.
• Then all four corners are bent.
• A small section of the vertices of each resulting triangle is slightly wrapped inward. It will turn out a peculiar form of future wheels.
• Bend one of the remaining two corners inward.
• Make an incision on the other corner and also bend inward. From it the windshield and the front part of the passenger car (hood) are obtained.

That's all - the three-dimensional model of the hatchback is almost ready. It remains to decorate it as you wish, draw windows and doors.

How to build a Cadillac

You can assemble an origami car from paper of a popular model. Using paper material of various colors, you can make a whole fleet of Cadillac models.

The execution technique is almost identical to one of the above schemes (hatchback).

• The sheet is folded in half.
• Then divide each side into three parts.
• Bend the resulting sashes in different directions.
• Turning the layout over, in the upper, main part, make bends on the sides, giving a peculiar shape to the car body.
• Bends are made on the sides for the wheels. For stability, the corners of the wheels are bent.
• In place of the proposed headlights, small bends are made. The transport is ready.

There is a diverse selection of car models that both adults and children can make out of paper.

For example, official cars are also popular.

The model of a fire engine is assembled from matchboxes glued together. There are enough of them four pieces, which are then pasted over with red paper.

• For the car tower, another box is taken and installed at the very top of the structure.
• A flasher can be built from plasticine, and matches are glued for the stairs.
• Doors and other attributes are made of colored paper.

Schemes for paper origami cars are attached.

Alternative design

Recently, more and more attention has been paid to the modular origami technique.

The overall design consists of many paper modules small size. Depending on the design model, the modules are attached to each other either by friction or with glue.

If the intended design consists of ten or more rows, then glue is used, since the product will not withstand its own weight and will crumble into elements.

Papercraft technique

Despite the foreign name, this technique is familiar to many from childhood. This is a process when the future product is cut out from the finished template, bent along the specified lines and glued together.

The advantage of this technique is that there is no need to reinvent the wheel, and the finished models are completely reminiscent of the real ones.

The Internet offers a wide range of templates. Both lovers of modern cars and connoisseurs of retro models will find options for themselves here.

Uniqueness paper crafts in that their implementation requires safe materials available to any family. Possession of such art is within the power little child. You can attract a boy to needlework by creating toys out of paper only by getting him interested in this activity. Suggest little man options on how to make and print a car, car, truck and KAMAZ from paper using a gluing template.

The uniqueness of paper crafts is that they require safe materials available to any family.

How to fold or assemble a paper police car using origami: a simple diagram and drawings

Crafts can be done both for the game and original gift good friend- to an adult. Since men are always boys at heart, an origami machine made from a banknote is suitable as a gift.

You will need:

• Rectangular sheets of colored paper;
• scissors, glue.

How to make a toy car:

1. Fold the sheet of paper of your choice horizontally. This is the central inflection of the future product.
2. Parallel bend lines bend the two halves of the sheet to the left and right side inside.
3. Bend the bends back inward. Then turn the ends of the sheet in the direction from the wrong side.
4. The bent curves of the inner corners form the body of an impromptu paper machine.
5. Under the wheels, make folds inward with triangles. To achieve maximum resemblance to the wheel, bend the corner peaks inward.
6. For headlights, the right corners of the car are also internally bent. On the left side, we do the kinks in the same way, but smaller in size and outward.

For a more colorful car manufacturing, stick paper triangles of a different color on the headlights.

How to make a paper car in 3 minutes (video)

Gallery: paper machine (25 photos)

How to make a car that rides out of paper

From paper you can make a moving car for the race. To start the movement, put such a craft on a smooth surface and blow on it. Under the action of the air flow, the figure begins to slide along the surface, imitating the movement of a real racing car.

Necessary:

• A sheet of white paper with a side ratio of 1:7 or A 4.

You can make a moving car out of paper

How to do:

1. Fold the paper sheet in half lengthwise.
2. Mark the fold lines by folding the top right and bottom left corners of the paper.
3. Form a bend in the upper part of the sheet with inner triangles in the center.
4. In the central direction, bend the existing triangles again.
5. By bending the sides inward towards the center line, we form the sides of the car.
6. Fold the bottom of the sheet with triangles over the top of the craft, then fold the figure in half. Tuck corners into pockets.
7. Now the model of the car can be decorated as you wish.

By helping and guiding the child's work, you can add up a whole racing fleet.

How to make a truck out of paper

Figure truck looks more impressive in volumetric format.

You will need:

• Thick paper;
• Glue, scissors;
• Wooden skewers;
• Double-sided adhesive tape;
• Plastic bottle;
• Compass, pin.

The figure of a truck looks more impressive in a three-dimensional format

How to do:

1. Cut separately four squares for the cabin, three equal rectangles and two squares for the body.
2. Fold two boxes from the cut out figures, connect them with fasteners using adhesive tape inside. You can first cut out the side windows from the two squares of the cab, securing pieces of plastic from the inside with adhesive tape. We do the same with the front of the craft, simulating the windshield. Glue the cab and body parts together.
3. On black paper, use a compass to designate eight small circles of the same size with a central dot. For stability, glue future wheels in two circles. Make a small hole at the center point with a pin.
4. Attach the wheels through symmetrical opposite holes on the sides of the figure, putting them on skewers through the hole.
5. Paint the figure of the truck with paints as desired.

The stability of the model will ensure the strength of the wheels - the more circles are glued at the base of the wheel, the better the craft will be.

How to make a war machine out of paper

You will need:

• A sheet of thick paper in dark green;
• Skewers;
• Scissors, compasses;
• Pencil, ruler, glue;
• Black paints, brush;
• Paper tubes or plastic cocktail tubes.

the finished product can be further decorated

How to do:

1. Draw four squares for the cockpit. On another sheet, draw three rectangles and two squares for the body. Separately, take a sheet, fold it lengthwise into three parts, glue it with a triangle - this will be a mount for missiles.
2. Draw side windows on the cab details, windshield on the front square. Glue the squares wrong side tape or strips of paper.
3. Connect the car body parts in the same way. Glue a paper triangle on top.
4. Combine the finished cabin and body into a single model of the car.
5. From black paper, make the same eight circles with a central dot. In the designation, make a hole for the skewers with a needle.
6. Make holes at the bottom of the cab and body with skewers, string wheels on them. So that the structure does not fall apart, soak the ends of the skewers in glue, dry.
7. Cut the cocktail tube into equal parts, about 3 cm each. Paint all the segments black. Let dry well.
8. Gently put homemade rockets on the body mount with glue.

To decorate a military vehicle made of paper, you can paint dark spots on the sides (or stripes on the hood) of the finished product with watercolors.

paper race car

The figure of this racing car was designed for the little ones.

Necessary:

• Roll of toilet paper;
• Paints, brush;
• Cardboard, compasses, scissors;
• Toothpicks 2 pcs.

The figure of this racing car was designed for the little ones.

How to do:

1. Clean the paper roll from the remnants of toilet paper, paint it in the desired color with watercolors. When dry, draw racing symbols with ballpoint pens.
2. With a compass, mark four equal circles for the wheels, cut out, paint with black paint.
3. At the base of the roll, pierce holes for the axis with a pin - toothpicks.
4. String the roll on toothpicks, fasten on both sides of each wheel.
5. Cut a semicircle in the upper part, bending the outer part like a windshield.
6. Inside, you can put a little man cut out of paper by attaching it with tape.

To make the wheels of the car spin, put a drop of glue on the ends of the toothpicks. Dried glue will prevent the removal of paper wheels when driving.

Paper car sweep diagram: how to make

The machine sweep diagram can be downloaded from the Internet. The presented models allow you to make any kind of equipment from paper from special to Soviet times.

To make a figure according to the scheme, you must:

• Selected scheme of the car model;
• Scissors, cardboard;
• Glue.

How to do:

1. For the stability of the future figure, stick the picture of the scheme on cardboard. Trim after drying.
2. Fold along the lines of the layout details. Glue them, carefully hiding the places of gluing.

How to make a paper car (video)

Assembling an origami machine or its schematic construction will seem a bit complicated at first. However, fascinating and cognitive activity will delight the future designer. Handmade develops the thinking of the baby, helping to improve the fine motor skills of the hands. And the made machine will become the most beloved of all toys.

(No ratings yet)