Schemes of baubles with oblique weaving - we deal with the notation. Schemes of oblique weaving of baubles. How to weave baubles with oblique weaving: tips for beginners Schemes for baubles with oblique weaving

30.08.2020

According to the scheme. It is thanks to the schemes that you can create real masterpieces: bracelets with names and many other interesting things. But how to work with them? How to read? And how not to get confused in the notation?

What should be taken into account when teaching?

The main thing you should pay attention to is the choice of material with which you plan to work later. For example, it can be beads, floss threads, twine, satin ribbons, colored rubber bands, etc. Accordingly, each type of material provides for its own subtleties and features of weaving, as well as patterns. Therefore, before you start learning this or that, select the material.

What you need to know when weaving baubles from threads?

Let's say you chose What's next as your starting material? And how to weave baubles from colored threads? Next, you need to study what knots are in weaving, since creation is based on them.

The main knots in the floss: knot number 1

Node number 1 looks like a cross with an arrow and a downward pointer on the diagram. It is deciphered as follows: you have two working threads of different colors (for example, yellow and orange); you take the thread that is located to your left and bend it towards the other, holding the formed triangle with your finger; slip the end of the bent thread under the straight line and tie a knot. Then repeat the same procedure a second time.

If you know the decoding of the symbols and the actions associated with them, you will easily figure out how to weave baubles according to the pattern.

Weave from threads the main knot No. 2

Node No. 2 can be schematically depicted as a cross, inside of which there is a circle with an arrow indicating the direction - down to the left. This designation is deciphered as follows: in front of you are again two colored working threads; this time you take the one that is with right side, put it on another; thread the end into a makeshift ring and tie a knot. The second node is performed according to a similar system.

We understand the schemes: the main node number 3

Node No. 3 in the diagrams is depicted as a cross with a circle, inside of which there is an arrow (it shows the direction to the right and down). Before weaving baubles with such a knot correctly, pay attention to the position of the arrow in the center of the circle. Look where she points.

Such a knot works according to the following principle: you take the thread that lies on the right and draw it under the other; tie a knot; repeat all the same steps again.

How to weave baubles according to the scheme: knot number 4

The fourth node is usually schematically depicted as a cross and a circle with an arrow pointing to the left and down. This figure is deciphered as follows: the working thread to your left is laid on top of the other remaining one; the end of the thread is pulled into a ring, and the knot is tied. The second time you put the same working thread under another one and tie it into a knot in the same way.

weaving baubles?

Before weaving baubles in stages and according to the scheme, you need to find out one interesting nuance. As it turned out, bracelets can be made both in a full and in an incomplete cycle. So, if the diagram assumes the image of a full cycle, then all the colors of such a baubles are located sequentially on both sides of the product.

If the scheme provides for an incomplete weaving cycle, then in the photo you will see a complete mismatch in the color of the threads on the left and right.

Weaving with paired and unpaired number of threads

Do you want to learn how to weave beautiful bracelets? Don't know how to weave baubles according to the pattern? Read our helpful tips- and everything will become clear to you immediately. So, in the diagrams you can often see that when weaving, a paired and unpaired number of threads or ribbons is used. For example, you can have 5 gray and 5 black threads or ribbons, 4 white and 4 red. This weaving will be paired. In unpaired, the number of working threads may not match. For example, you may have 5 red and 7 white threads.

How to weave bracelets with inscriptions?

Many craftswomen and masters of one of their first works try to make jewelry with a name or an inscription. Is it difficult to do this? In general, no. However, the creation of such bracelets involves working with a large number of threads, in which it is easy for beginners to get confused.

Before weaving baubles with inscriptions, it is worth finding a suitable pattern and counting the exact number of threads needed to create the product. To do this, you need to count the number of cells in the first vertical column in the diagram. For example, they turned out to be 8. This means that you will need exactly 8 threads for weaving.

In addition, it is worth considering the fact that a pattern or an inscription on a bracelet involves the use of two types of threads or ribbons: one of them is used to create a base-background, and the second is used for an inscription or pattern. In this case, the length of the secondary thread or tape should not be large (50 cm is enough), and the length of the background thread should be 2-3 times the expected length of the product. Please note that to create a background you will need a large number of threads. Therefore, it is better to take a whole skein. As a result, you should get one leading thread and 6-8 background threads. What else do you need to know before weaving baubles with inscriptions?

What else needs to be done before weaving baubles with an inscription?

Before starting the work itself, you need to make some simple mathematical calculations. This must be done not only so that in the end the bracelet will converge on your hand, but also in order to correctly place the inscription on the product.

To make it easier for yourself, you should write the intended name or inscription on a piece of paper in a cage. Next, pay attention to how many cells it occupies. For example, you have 30 cells, which equates to 30 rows. The approximate density of weaving your product will be 1 cm of the bracelet - 5 rows. Therefore, 30 rows have a density of 6 cm (30/5).

Then we measure the volume of the wrist. Let's say it corresponds to 15 cm. This means that with a length of 15 cm for a baubles with a text length of 6 cm (15 - 6 = 9), it is necessary to make 9 cm of the main background. If we divide this number by two, we get 4.5 cm on each side. Next, multiply the resulting value by 5 and get the number of rows for the background (4.5 x 5 = 22.5 cm). And only if these conditions are met, the inscription will be in the middle of the decoration. We will talk about how to weave simple baubles further.

How to make simple baubles?

It's always better to start with simple products, which in the future will allow much faster mastering more complex technique weaving. So, if you want to make a simple bracelet, then you are best suited. To do this, take an even number of threads or ribbons and separate them in pairs by color. For example, in the middle there will be two blue threads or ribbons, followed by two orange ones (one on one side, the other on the other side), the next two green, then two purple, two orange and two red.

Take the first and second strands and, using the knot technique, tie both strands together. Repeat the same movement again with the same threads, and then with the last two (this time the movement with the knots will be in mirror image). After that, repeat the same procedure with the rest of the threads or ribbons. With the correct work with the scheme, you should get a herringbone pattern.

How can you make round baubles?

If you still do not know how to weave round baubles, we will tell you. The most difficult is straight and round weaving, which requires a certain amount of experience. For example, to make a product using weaving a tourniquet (round), you need to select a pattern and prepare the threads (their length should be three times that allocated for the bauble itself).

At the same time, the simplest version of such weaving is based on working with four threads; for example, it can be two red and two white or multi-colored. Such weaving is carried out strictly according to the scheme: turn the threads to the sides and tie the two extreme ones; then we put the first on the second and tie; the second to the third, the next to the fourth and then repeat in a circle.

In a word, it is not so difficult to understand the schemes. The main thing is to know general concepts and designations!

In the 90s of the XX century, everyone without exception was fond of weaving bracelets from knots - "baubles": both boys and girls.

For children and adults weaving floss baubles, patterns from fashion magazines seemed to be the greatest treasure. Elegant decorations made of bright threads were given to best friends.

While a friend is tying a bauble on the wrist of its owner, he must make a wish. When the bracelet is frayed and torn, the wish will surely come true.

A little history of "baubles"

Came up with this interesting bright decoration Indians from the North American continent - it was from them that the tradition of giving a wicker accessory on the wrist to friends came. Initially, the jewelry symbolized friendship and the name was appropriate: "friendship bracelet" - friendship bracelet.

The stronger the product was woven, the longer it held on the hand of its owner, the more inseparable were the friendly ties connecting the one who gave and received people. If someone independently removed a bauble from his hand, this meant that the friendship was over, and was considered a strong insult.

In the 60s and 70s of the last century, the bauble became one of the attributes of the popular hippie movement. Not only bracelets, but also hair bands began to be woven from threads. The value of "peace" has been added to the meaning of "friendship", inherent in this wicker accessory. Together with the popularization of the hippie movement, the planet was captured by a real "baubles mania".

Since no special tools are needed to create baubles, Russian children fell in love with bright and simple “friendship bracelets” very much. Now, thread weaving has given way to the even easier-to-use lumigurumi techniques, but there are still adherents of traditional thread braids.

The first steps to creating baubles

To create a floss baubles, the oblique weaving scheme will be enough, but there is no limit to perfection. A bracelet made of floss or iris threads is much more durable than the same thin, multi-colored rubber bands that are so easy to tear and lose.

Tools and materials for work

For those who decide to create their first bauble, weaving patterns should be taken as simple as possible. Gradually improving in skill, you can take more complicated schemes and even invent your own patterns.

To weave baubles we need:

Most often, to get started, the threads are tied into one large knot, which is then pierced with a safety pin. The pin is subsequently attached to any object suitable to keep the threads in tension. For some, it can be a sofa cushion, others attach a pin to their jeans. Some manage to weave baubles even in long-distance transport, attaching the work to the soft back of the seat in front of them.

Terminology for understanding the process

To weave and understand the patterns of floss baubles, you need to learn some of the terms used by the craftsmen. This will greatly facilitate the study of the progress of work on products.

working thread is the thread with which the pattern is made.
background or warp thread - the thread on which the working thread is wound.
regular knot: double knot, when the working thread is wound twice on the background thread in one direction (with this design, the threads are reversed). It happens left or right.
tatting: the working thread is wound onto the background thread once in one, the second time in the opposite direction (the threads DO NOT change places!). It can also be left or right.

How to choose thread length

Usually, a thread is taken for weaving, four times the length of the finished product. This is quite enough for knot weaving technique. The main thing is that the threads do not twist or get confused with each other.

However, if the work is to be large-scale, then the thread can be chosen to a convenient length for the master. Such an exit is suitable if you do not want to mess around with hanks or balls, which, to simplify the work, are twisted from excessively long floss tails.

How to connect two floss fragments to each other if the working thread turned out to be shorter than we would like?

the finished thread is placed on the wrong side of the product (its tail should be sufficient to form a knot);
a new thread of the same color must be attached to the product with wrong side;
if the working thread is growing, it is simply tied around the warp thread with the necessary knots according to the plan;
in the case of building up a warp thread, a working thread is wrapped around it;
the remaining tip of the new thread is tied to the tail of the old one.

Schemes of oblique weaving

Oblique weaving of baubles is the easiest option for beginners. It is well suited for getting acquainted with the creation of friendship bracelets from floss.

For the first baubles, oblique weaving patterns are the best fit: they are simple and understandable.

Ordinary slanting braid

Doing the most simple option baubles do not require much understanding: for it you only need to arrange the threads in pairs and learn how to make the left ordinary knot.

To simplify the work, you can start with eight threads of floss or iris in four colors (two threads of each color, respectively). They are arranged in pairs by color, then tied around a safety pin or attached with tape to the table. At first, you will need to carefully monitor the order of the threads. Then, with proper operation, the tips themselves will neatly arrange themselves in the desired sequence.

To execute a normal node in left side The left thread is considered to be the working thread, and the right thread is considered the warp thread. The working one is superimposed on the main one from above, then it is pulled under the warp thread, brought out into the resulting window and pulled to the right side. Then the same round is repeated. Thus, the leading thread is on the left, which is why the resulting knot got its name - left.

Weaving an ordinary oblique baubles begins with the leftmost thread. It is wrapped in turn around the remaining threads with the usual left knot. After it has become the rightmost in the row, the next leftmost thread becomes the working one.

The result of this work is neat rows of knots, slanted from left to right. Weaving must be continued until the finished “mosaic” of knots becomes the length necessary for the master.

Even such a simple bauble in execution looks very elegant and pretty. Having mastered it, you can proceed to the next stage of mastering the oblique weaving of baubles.

"Arrow" or "fish tail"

To create this very simple type of baubles, you will need to use not only the left simple knot, but also the right one. It is performed by analogy with the left, its mirror image, that is, the working thread is taken from the right side of the work and pulled to the left side.

Material for this bauble- 10 threads of floss or iris (5 pairs of different colors). They are arranged symmetrically by color, that is, a thread of the same color is the first and last, the second is the second from the left and the penultimate one, and so on. In the middle there are two threads of the same color.

To begin with, the leftmost thread is considered to be working, by analogy with the previous version of the baubles. A row of left knots ends after reaching the middle of the canvas (the last left knot is tied around the first of two adjacent tips of the same color).

Then the extreme right becomes the leading thread: it is knitted with the right ordinary knot to the middle of the canvas. As a result, it turned out that both working threads of the same color are now weaving next to each other.

The resulting scheme is repeated several times: the working left and right threads are pulled to the center with the corresponding knots. A pattern of arrows formed by knots appears on the canvas, stretching down to the end of weaving.

Such a bauble is well suited for a gift to a girlfriend who loves accuracy in everything: the pattern of the “friendship bracelet” turns out to be pleasantly symmetrical.

Study of straight weaving

Baubles made by direct weaving are much more complicated than the previous options. The main thing to learn when studying this technique is the ability to clearly separate the working thread and the warp threads. In most schemes, the former should be much longer than the latter.

For novice craftsmen, when creating floss baubles, direct weaving patterns may seem complicated. However, with due patience, they can be mastered.

It is better to start acquaintance with direct weaving with two-color baubles: one color for the background, the other for the formation of a pattern. Symmetrical patterns, such as diamonds, for example, are easier to weave, so they should be tried for the first time.

The trick is to start the working thread (background thread) either from left to right, then back - from right to left with the usual left and right knots, respectively. The pattern is formed by the warp threads: in the place where it is supposed to be in the scheme, the warp thread is tied around the leading one, and not vice versa.

Subsequently, having learned to read the diagrams and correctly positioning the warp and leading threads, you can create patterns of any complexity. It is enough to find weaving patterns suitable for the desired baubles on the Internet or draw it on paper in a box.

Friendship bracelet decoration

You should not be ashamed to give a bauble woven with your own hands - after all, this is what it was created for. To do this, carefully shape its tips so that it is convenient for the owner to tie a bracelet on his hand. The easiest way is to tie the tails of the threads into one or two pigtails, arranging them at the beginning of weaving and at the tip with knots.

To give the accessory a more sophisticated look, you can weave it into thread braids. glass or wood beads, placing them between two knots so that they do not slip off. Eccentric girls even thread small bells into the ends of their baubles, which you can buy in art stores. However, wearing such a bauble without removing it is unlikely to succeed.

Now that the world of amazing and bright baubles made of multi-colored threads has become closer and clearer, it's time to start creating your first friendship bracelet. Undoubtedly, one of the friends who, along with the bauble, receives a piece of the master's soul invested in it, is the most worthy of people on earth.

Attention, only TODAY!

The idea of creating baubles takes its roots from North America. These wonderful jewelry in the form of bracelets were invented by the Indians, who, creating a bauble, gave it a special meaning and endowed it with the power of a friendship talisman. Subsequently, all the traditions associated with weaving bracelets of friendship and love were adopted by the hippies and brought their own adjustments to them.

Currently, baubles have become a fairly common decoration that can even be purchased in stores. But still, for many, it remains much more to weave such a bracelet for themselves. an interesting activity than buying it ready made. Since in this case it can be made individually for yourself according to your tastes and preferences, in addition, such a product can be an excellent gift, since it is always more pleasant to receive hand-made things. You can weave baubles with the help of various materials, but one of the most common are floss threads. Doing it yourself, even for beginners, is not so difficult, the main thing is to choose the most suitable and easier way for yourself.

Tips and instructions on how to start weaving floss baubles for beginners

First of all, in order to start learning and weaving floss baubles, for beginners, you need to purchase the following materials for work:

Mouline threads of various colors (The length of the thread for the future product is always taken 4 times longer than the future decoration itself).
A pin, tape, clip or tablet as a device for attaching threads.
Then choose the most convenient way for you to attach the threads necessary for the upcoming work. Let's take a closer look at a few of them:

1 way. Each individually taken thread is tied at one end with a knot to the pin. And the pin itself is attached to the fabric or the back of the chair, for example.

2 way. The threads are fixed using a tablet - a special board with a clip.

3 way. For this method, a clip is taken, and floss threads are placed between it and a book or a thick notebook. Then the clamp is fixed.

4 way. Prepared threads, collected in a bundle, are fixed with their ends to any surface that will be convenient to work with using a wide adhesive tape.
In each of the methods, the threads must be correctly distributed in advance according to the color scheme according to the chosen pattern for weaving floss baubles.

They are the basis of weaving each bauble - knots, that is, the ability to make them. Having memorized the basic techniques for performing knots, as well as their conventions it will be quite easy for any beginner to figure out all the patterns of weaving baubles. The most common are the following nodes:

Main knot. This knot has such a name because all the weaving of baubles is based on it. It is performed using two threads, as follows. One of the threads, in this case yellow, is slipped under the other, so that a loop is obtained, into which the same yellow thread is threaded. After the loop is pulled to the base of the weave and tightly tightened. It is very important that all knots are the same size.

Half knot. This knot is already made with four threads. To bind it, the two middle threads must be pulled and secured, for example, with adhesive tape. After that, the thread located on the left side moves over the fixed ones and is hooked under the rightmost thread. Then the rightmost thread is passed under the fixed ones, threaded from below through the loop formed by the leftmost thread and both threads are tightened until a loop is formed.

Flat knot. This knot is made very simply, for this, the left extreme thread is thrown over the middle ones, and the right extreme thread is threaded from below into the loop formed. After that, the right extreme thread must be thrown over the middle ones and hooked under the left one, and the left extreme thread must be passed through the middle ones and thrown over the right one. Then the tips are stretched until a knot is obtained.

Your attention was presented to the most simple knots and instructions for them, having learned how to do which every beginner will be able to weave floss baubles with simple pattern, and then start learning to do something more difficult by choosing one of the ways you like.

Ways of weaving baubles

The most common and popular weaving methods are straight and oblique weaving. With the help of direct weaving, more complex patterns are made that form various patterns, and the method of oblique weaving of floss baubles is quite suitable and only for beginners this exciting activity, so we will first of all consider it.

Baubles from floss with oblique weaving

Quite often, the beginning of the baubles is done precisely with the help of oblique weaving, which is done with the help of 12 threads. The colors in a bunch of threads according to this method should be arranged as follows:

The threads are arranged in pairs in colors relative to each other, starting from the middle of the product and ending with its edge. After the threads are distributed correctly, their beginning is fixed in the chosen way and the following steps are performed:

We make a fastening knot, approximately at the level of 10 cm from the beginning of the product.

We take two threads from the left edge. We put the first thread on the index finger, pulling it a little, and hold the second with the thumb and middle finger, the result should be a figure similar to the number four. We slip the extreme thread under the elongated second one and thread it from top to bottom through the formed figure and tighten the threads, carefully forming the first knot. Then a similar second knot is made on the same threads.

In the next step, we take two threads from the right edge and, just like on the left side, weave two knots.

Then we take the second and third threads from the left edge and weave the same knots, we do the same on the right side. The action is repeated towards the middle until all the threads are woven in pairs with each other and the threads that were originally extreme become middle.

The second and subsequent rows are woven similarly to the first. At the end of weaving, a fixing knot is made. As a result of all the weaving, a bauble with a pattern very similar to a multi-colored Christmas tree is obtained.

Baubles from a floss with a direct weave

When weaving baubles from floss in a direct way, the working bundle of threads is divided into two groups, into plain threads, which are the base of the baubles and multi-colored for the background and pattern, and the length of the thread for the pattern increases depending on how large it will be. The essence of weaving a product in this way is that the threads of the pattern intertwine the threads of the base according to the scheme. The threads selected for creating floss baubles with direct weaving are attached in the following sequence, first those that will weave the base, i.e. knit the pattern, and then the main threads and background threads, that is, those from which the pattern begins. Let us consider in more detail the process of making baubles by direct weaving in the following example.

How to weave floss baubles with a Ghost pattern:

1. For the drawing, we take the threads of five colors: gray for the background and black, red, white and blue for the image itself. The length of the threads for the pattern should be approximately 100-110 cm.

2. We first attach the threads that will not be used in the first place, namely white, red and blue. Then those with which the products will begin: basic black and gray. Moreover, the gray thread should be the longest of all, since it will be used most often when weaving a pattern.

3. We start weaving the product with a gray thread. To do this, we take a thread of this color and first we throw it over the leftmost black thread, and then we wind it under it and again over the base thread, bringing it out under its own beginning. After these manipulations, a loop is formed into which we thread a gray thread from top to bottom, then gently pull it to the beginning of weaving and tighten the resulting knot. Then we repeat the knot on the same thread a second time. In the same way, all 19 black threads of the base are intertwined with a gray thread, and then the next 4 rows.

4. After that, the colors of the nodules are selected according to the scheme. According to which, we first weave 8 black threads (two knots) with a gray thread, after which we make 5 black knots. To do this, we interlace the gray thread with a black thread, making two knots in the same way as in paragraph three and taking into account that the gray thread should remain motionless. Then again, according to the drawing, we make gray knots to the end of the row.

5. In the next row, black knots are knitted under black knots, gray ones under gray knots.

6. In the sixth row, white is included in the weaving. The input of a new color is carried out as follows: a gray thread is laid behind the weaving, and a white thread is taken instead of it and the work continues further according to the scheme, that is, the black threads will be braided with a white thread.

7. After the required number of knots has been made with a white thread and two black squares are woven on a thread of the same color, you can return the gray thread, weaving the pattern to the end.

8. We continue weaving according to the scheme until we reach the input of a blue thread.

9. We output the thread in the same way as white, replacing white with blue and making a knot using a new color. And then again, according to the scheme, we weave a drawing.

10. In order for the blue thread to quietly leave the weave, it must be removed gradually. To do this, as in the case of white, the thread is braided with two black squares, and only after that we return the main thread of the background, that is, gray. Then again we continue weaving according to the pattern.

11. The red thread is introduced in the same way as the previous new colors of the pattern, after which the rest of the image is woven along with it. In order for the drawing to turn out, it is very important to carefully weave the knots without deviating one step from the scheme.

12. After weaving has been completed, we tie the remaining ends of the thread together, so that in the end we get four neat and identical knots.

13. upper threads We fix the white, blue, red and gray colors with knots and cut them off, and we fix the black threads with knots with a pin.

14. In order to hide the errors from the wrong side, cut off a rectangle of thin fabric of the required size and carefully sew it with a bauble.

As a result, we get this bauble:

How to weave floss baubles with names

Floss baubles with names are woven using two types of knots shown in the following diagram:

The easiest way to weave floss baubles for beginners with an inscription will be if you use only two colors. In more detail how this is done, consider the example of weaving the letter A.

Baubles are the friendliest decoration

Hand made jewelry is an unchanging trend that has been adorning the collections of famous designers for several seasons. Rings, earrings, bracelets made by hand are always exclusive, they contain the warmth of the master's hands, a piece of his soul. Agree, this is a powerful motivation to immediately start needlework. Baubles are the friendliest decoration, such accessories are original, original and charmingly beautiful. To learn how to weave designer accessories, you need to master the ABC of manufacturing and learn how to read patterns of baubles with oblique weaving. As you know, there are only two methods for making baubles: direct and oblique execution. It is recommended for beginner fennec weavers to comprehend the art, starting with the oblique method.

There are many ways to decorate the image. Author's accessories will help to reveal individuality, turn ideas into an elegant reality, attract attention, emphasizing excellent taste. Creating baubles of oblique weaving is the easiest way to implement creative plans.

Stylish bauble with oblique weaving

Looking at multi-colored bracelets, it is difficult for many to believe in themselves. The scheme has been found, the threads have been bought, where to start? A few practical tips will help you understand how to weave baubles with oblique weaving:

Let's prepare the material. Standard oblique weaving of baubles is considered the most in a simple way make fashion accessory. The thread must be strong, of sufficient length, evenly dyed in one tone.

It is very important to choose high-quality materials for weaving

Advice:

When measuring the threads for the bracelet, you need to follow the 1: 4 algorithm, the length of the components should be 4 times longer than the finished product.

Learning to knit knots. The aesthetics of the finished jewelry depends on the ability to properly tie one or another element. The knots should be the same, tightly tied, weaving into a beautiful combination, which is illustrated by the selected baubles pattern.
Learning to read a drawing. For weaving baubles, patterns are an auxiliary tool not only for beginners, but also for experienced craftsmen. At first, a ready-made baubles scheme can be used, but over time, any master will have a desire to create their own unique drawings.

The main knots for weaving baubles

Following the basic tips, many questions will disappear by themselves, leaving space for boundless imagination and the creative process of weaving.

A little practice and incredible stylish accessory ready

Conventions

For any method, schematic images are the basis for weaving baubles. There are several general symbols that appear in each figure:

Letters. Latin characters or Cyrillic indicate the order of the threads, and each element has its own letter.
Numbers. They are arranged vertically in the figure, indicating the serial number of the row.
Mugs. This is how knots are designated. The color of the circle corresponds to the thread that is leading in tying the element.
Straight arrows. The symbols define the direction. They will tell you in which direction this thread needs to be thrown.
Angled arrows. Top part determines the left-right direction. We look at the segment, determine the direction, and then similarly tie a knot.

The scheme of weaving a bauble bracelet

Using the previous diagram, you can create real masterpiece

These bracelets will be an excellent addition to the image.

As you can see, reading the diagram is not a matter of incomprehensible complexity. Go for it, because in any business skill comes with experience.

A selection of master classes

Mastery in the art of weaving baubles is determined by the ability to work with a large number of components. Experienced craftsmen can weave threads into patterns using up to 10 threads at a time.

For beginners, it is better to start with a smaller amount, for example, using 6 threads. Even a beginner can weave a beautiful bauble with an oblique method.

An example of a simpler baubles for beginners

A little imagination and a stylish accessory is ready

For work, you will need beautiful threads, the colors are chosen according to the taste of the needlewoman. We begin the process by fixing the threads on the working surface, it can be a pillow, a planchette, a tablet with a stationery clothespin.

Weave a zigzag

This master class will help you create an unusual decoration with a zigzag textured pattern.

ZIGZAG pattern

Wide bauble with a zigzag pattern

Weaving algorithm:

We select colored threads in the amount of 5 pieces. Each is at least 1 meter long. We collect in a bundle, tie a knot at the end, fix it on the working surface.
We lay out the individual components and make sure that the order in the first strand strictly corresponds to the order in the second strand.
We begin to knit a combination of elements. First we connect the two extreme right threads. Then we make two knots to the right for the next component.
We knit three knots in the same direction. Gradually we will connect all the components. It turns out nine multi-colored stripes.
In a similar way, we alternately connect all the threads with knots, but already moving in the opposite direction.

We repeat the entire algorithm until the end of weaving, getting a bright zigzag pattern.

classic pattern

The combination of black, white, red in a laconic pattern is an unchanging classic of style. If desired, you can use any other colors, but the weaving algorithm remains unchanged:

Fenichka pigtail of contrasting colors

A simple version of the pigtail baubles

Take 6 threads, 2 of each color. The length of the components is not less than 1 meter.

Classic pigtail - the basis of oblique weaving. It is from her that it is recommended to begin acquaintance with the art of creating baubles from threads.

We tie all the threads into a knot, braiding a pigtail. Next, we knit a knot, connecting the extreme threads of the same color with each other. We make two knots on each thread.
Without releasing the extreme thread from the hand, we knit knots, connecting it and each other component in turn.
Take the next thread, but of a different color, doing the same work.
We complete the combination by knitting knots with a thread of the third color.

We continue the entire weaving cycle, at the end we will again tie all the strands with a classic pigtail. Having got used to alternately knit knots in one color, you can add a few more colors.

Elegant bracelet

Handmade jewelry is always beautiful, original and exclusive.

We offer a master class on creating an elegant floss baubles for special occasions. The algorithm is the following:

We select 6 threads of three different shades. Each is at least 2 meters long. Fold them in half, tie at the end and fasten. We lay it out in such a way that 4 threads of each color follow each other in order.
We alternately tie the extreme thread on the right with the rest of the same color scheme. We repeat the maneuver, but with the components that are located on the left.
We will connect the two central parts with a simple double knot, and then we will connect the remaining two with neighboring ones.
Knot the two center pieces again. And on the right and on the left we will repeat the maneuver, connecting with each other in turn.
Separately, we intertwine the two central threads with neighboring strands so that we get the English letter V.

By repeating the combinations to the end of the product, in the end we will get an unusually delicate and elegant pattern.

Lace bauble

Having mastered the technique of recognizing patterns of oblique weaving, you can create by creating your own beautiful schemes patterns.

Bright bracelet will not go unnoticed

Starting with the simplest examples for beginners, you can create entire author's collections as a gift for yourself, family and friends.

Weaving bracelets is an entertaining activity

Baubles are always a great gift

Became very controversial. Not everyone is completely clear and questions sometimes arise. Let's try to analyze everything in as much detail as possible in this master class.

So, first, let's look at the diagrams. They can be with a full cycle of weaving, or not. This scheme is full cycle. This can be understood by the placement of threads at the beginning and end of the pattern. Here, and there, and there, the sequence of colors is the same - black, purple, black, purple, purple, black, purple, black. This means that after we have woven the part shown in the diagram, we begin to weave it again and all the threads match in color.

And this scheme with an incomplete cycle. Here, the sequence of threads is different at the top and bottom. Above - pink, yellow, blue, green, white, orange, red, purple. And below - blue, pink, white, yellow, red, green, purple, orange. In such schemes, you need to look at the weaving sequence. Here we weave knots in the same way in a cycle, only our threads will not match in color. So sometimes it is given if the principle of weaving is clear in a short part. The full cycle of this scheme is possible.

There are also schemes with a paired number of threads and unpaired. We will weave a bauble according to this pattern. She has a pair of threads - four black and four purple.

This means that we can take 2 black, 2 purple threads and fold them in half. In this case, the length must be doubled. As for the choice of thread length, this is an ongoing issue. Here you need to look at the scheme itself and how many knots you need to make with a particular thread. It comes with experience. In most cases, one and a half meters of thread is enough.

After we have folded the threads, we tie them, leaving a loop. We fix the bauble so that it is convenient to weave it. We used a paper clip, you can fasten the bauble with a pin to the sofa or pillow.

You need to weave a bauble in rows. The numbers on the sides of the diagram show the row numbers. You can weave from left to right, you can vice versa. There is no difference, the main thing is that you do not get confused. We will weave constantly from left to right. Let's start weaving baubles with this knot.

The arrow shows which knot you need to weave. The base of the arrow shows with which thread we make knots (the circle is colored in the same color), the tip of the arrow shows where this thread will move after the knot. Each knot consists of two knots. We start the first knot like this, bend the black thread over the blue one (we took blue instead of purple) in the form of a four. Then we thread the black thread inward and tighten the knot by pulling it firmly up. We have made half of the first knot.

We do the second half like this. We bend the black thread in the shape of a four in a mirror image, thread the black thread inward and tighten. We have completed the first knot. After it, the black thread will be on the left, and the blue one on the right - this can also be seen from the diagram. Now you know how to weave a knot in the shape of such a curved arrow.

Let's move on to the second node. This is a node with an arrow from left to right. Like the previous one, like all subsequent ones, it consists of two nodules.

Since the base of the arrow is at the black thread, then we will braid it. If the arrow is from left to right, then we put the black thread in the form of a regular four. We sell and tighten.

We also make the second knot of this knot in the form of a regular four and tighten it. Here we have finished the second knot.

We pass to the third node, this is an arrow from right to left.

The base of the arrow is at the black thread, we begin to braid it. The arrow from right to left is two knots with a mirrored four. We make the first knot.

And the second knot is the same. The third node is finished.

We proceed to the fourth knot of the bauble. This is a curved arrow from right to left and right. If you have not yet understood the trend, then we pay attention to how to weave baubles without peeping into the master class. We mentally divide the arrow that we weave into two parts. Each part is one knot. If the part is directed from left to right, then we braid with the correct four, if from right to left, we braid with a mirror four. This is true for both straight arrows and curved ones.

So this knot is the first part in the form of a mirror four.

The second part is in the form of a regular four. Remember this, and you will not have to peek into the cheat sheet :-).

Here we have finished the first row, and besides, we have sorted out all the knots that can be found in any baubles schemes. We begin to weave the second row of baubles. In this row, extreme black threads are not used, we put them aside. We need to tie three knots.

The first knot from left to right on blue threads.

Second from left to right on black threads.

And the third from right to left on blue threads.

Here is the second row. As you can see, the nodes are the same and everything is simple. In the third row, all threads are used. We braid black threads with blue threads. Knots look at the arrows.