We knit a stylish accessory: a bow tie. Detailed instructions on how to tie a bow tie

spells

Add some spice to your regular shirt with knitted tie or a butterfly by Susie Jones. Tie and bow tie knit large crochet 5 mm, so the yarn needs to be thicker (it is best to use cotton).

The crochet tie and bow tie pattern was translated into Russian by Handcraft Studio at the request of readers.

Knitted tie and crochet bow tie

How to crochet a tie and bow tie: diagram and description

You will need: yarn of the desired color, hook 5 mm, tie / bow tie fastener, tapestry needle.

Abbreviations:
ch \u003d air loop
RLS = single crochet
PSN \u003d half-column without crochet
CH = double crochet
2 sc together = knit together 2 sc

Dimensions:
Butterfly: Approx 6 cm x 16 cm.
Tie: Approximately 7 cm (at its widest point) x 160 cm.

We knit a tie:

Crochet 5 mm green yarn, ch 16
Row 1: 2 sc in the second st from the hook, 1 sc in the next. 6 p., skip 1 ch, 1 sc in the next. 6 sts, 2 sc in last st.
Row 2-11: Ch 1 (does not count as a separate stitch), 2 sc in first sc, 6 sc, skip 2 sc, 6 sc, 2 sc in last sc.
Row 12: ch 1, 7 sc, skip 2 sc, 7 sc
Row 13-17: Ch 1, 2 sc in first sc, 5 sc, skip 2 sc, 5 sc, 2 sc in last sc
Row 18: Ch 1, 7 sc, skip 2 sc, 6 sc
Row 19-23: Ch 1, 2 sc in first sc, 4 sc, skip 2 sc, 4 sc, 2 sc in last sc
Row 24: ch 1, 5 sc, skip 2 sc, 5 sc
Row 25-29: Ch 1, 2 sc in first sc, 3 sc, skip 3 sc, 2 sc in last sc
Row 30: ch 1, 4 sc, skip 2 sc, 4 sc
Row 31-35: Ch 1, 2 sc in first sc, 2 sc, skip 2 sc, 2 sc, 2 sc in last sc
Row 36: ch 1, 3 sc, skip 2 sc, 3 sc
Row 37: Ch 1, 2 sc in first sc, 1 sc, skip 2 sc, 1 sc, 2 sc in last sc
Repeat row 37 until you run out of green yarn or the work is half the desired length (about 80 cm)
Cut green yarn, attach cream.
Repeat row 37 until desired tie length.
Next row: ch 1, 1 sc in first sc, 1 dc, 2 dc, 1 dc, 1 sc in last sc.
Next row: ch 1, 1 sc in first st, 1 dc, 2 dc, 1 dc, 1 sc in last st.
Cut yarn and cast off the last stitch.

Product assembly
Hide the ends of the threads. Iron the tie through a damp cloth.

We knit a butterfly
Bow loops
Please note: at the end of each row, the work must be turned over.
Crochet 5 mm red yarn, ch 6
Row 1 (right side): 1 sc in 2nd st from hook, 1 sc in each st to end of 5 sts
Row 2-4: ch 1 (does not count as a separate stitch), 1 sc in each sc of the previous row
Row 5: Ch 1, 2 sc in first sc, 3 sc, 2 sc in last sc, turn. 7 loops
Row 6-8: ch 1, 1 sc in each sc of previous row
Row 9: Ch 1, 2 sc in first sc, 5 sc, 2 sc in last sc. 9 p.
Row 10-19: ch 1, 1 sc in each sc of previous row
Row 20: Ch 1, 2 sc tog over first 2 sc, 5 sc, 2 sc tog over last 2 sc, 7 sts
Row 21-23: ch 1, sc 1 in each st of previous row
Row 24: Ch 1, 2 sc tog over first 2 sc, 3 sc, 2 sc tog over last 2 sc 5 sts
Row 25-31: ch 1, sc 1 in each st of previous row
Row 32-55: Rep rows 5-28 1 time.
Close the last loop.

Bow ponytails
Please note: at the end of each row, the work must be turned over.
Crochet 5 mm red yarn, ch 10
Row 1 (RS): 1 sc in second st from hook, 1 sc in each st to end of 9 sts.
Row 2-4: ch 1, sc 1 in each st of previous row
Row 5: Ch 1, 2 sc tog over first 2 sc, 5 sc, 2 sc tog over last 2 sc, 7 sts
Row 6-8: Repeat rows 2-4 1 time.
Row 9: Ch 1, 2 sc tog over first 2 sc, 3 sc, 2 sc tog over last 2 sc 5 sts
Row 10-18: ch 1, sc 1 in each st of previous row
Row 19: Ch 1, 2 sc in first sc, 5 sc, 2 sc in last sc. 7 loops
Row 20-22: Rep rows 2-4 1 time.
Row 23: Ch 1, 2 sc in first sc, 5 sc, 2 sc in last sc. 9 p.
Row 24-27: ch 1, 1 sc in each sc of previous row

Center loop
Crochet 4 mm red yarn, ch 5
Row 1 (RS): 1 sc in 2nd st from hook, 1 sc in each st to end of 4 sts
Row 2-12: Ch 1, sc 1 in each st of previous row. Close the last loop.

Neck strap
Crochet 4 mm red yarn, ch 4
Row 1 (right side): 1 sc in 2nd st from hook, 1 sc in each st to end of 3 sts
Row 2-64: Ch 1, sc 1 in each st of previous row. Close the last loop.

Product assembly
Insert the tail into a tapestry needle and sew the two short ends of the bow loops together. The seam runs down the center back. Then carefully sew on the tails of the bow, stitching through all the layers. Sew on the neck strap in the center. Wrap the center loop around the center of the tie and sew up the ends along the short side at the back. Pass one end of the neck strap through the buckle and then through the hook. Pull the end of the tie through the buckle again and secure the end with a needle and suitable thread. Pass the other end of the strap through the other hook, unfold that end and secure.

How to tie a bow tie

.
<
In order for this butterfly to keep its shape well, you need to choose light yarn and knit tighter (or take knitting needles half the size recommended for the selected yarn)

When knitting narrow long pieces with the same pattern on both sides, it is convenient to use stocking needles of different colors for quick orientation in the front and back rows.

We carefully study the diagram and photos

We collect 12 loops and knit with a garter pattern (front loops in the front and back rows), while the first edge loop in a row we remove, without knitting, and we knit the last one on the wrong side.

We decrease in each 4th row 1 loop on both sides 3 times. The remaining 6 loops knit 8 rows without change. Next, we add 1 loop on both sides, for which we knit the loop next to the edge for the front and back walls. We make increases 2 more times in each 4th row. Next, we knit 8 rows without changing the number of loops. And again on both sides we decrease one loop and repeat the decrease 3 more times in each 4th row.
The remaining 4 loops are knitted unchanged until the length of the narrow segment becomes equal to the girth of the neck plus 3-4 cm. Then we add 1 loop on both sides and repeat the increase 3 more times in each 4th row. We knit 8 rows without changes.

We decrease by 1 loop and repeat the decrease 2 more times in each 4th row. We knit 8 rows without changes, add 1 loop on both sides and repeat the increase 2 more times in each 4th row. We knit 3 more rows without changes and close the loops.

The remaining 4 loops are knitted unchanged until the length of the narrow segment becomes equal to the girth of the neck plus 3-4 cm. Then we add 1 loop on both sides and repeat the increase 3 more times in each 4th row. We knit 8 rows without changes. We decrease by 1 loop and repeat the decrease 2 more times in each 4th row.

We knit 8 rows without changes, add 1 loop on both sides and repeat the increase 2 more times in each 4th row. We knit 3 more rows without changes and close the loops.


Knitted bow tie for stylish men from Vogue Knitting Early Fall 2014.

Size 14 x 7 cm.

For knitting you will need: Cascade Yarns Heritage Silk yarn (85% merino wool, 15% wool, 400 m / 100 g); Two pairs circular needles 2 mm, length 60 cm, hook 2.25 mm for precast on, auxiliary thread in contrasting color, wide elastic band suitable color.

Knitting density: 48 p. and 56 p. \u003d 10 cm with the main viscous knitting needles 2 mm.

Preliminary set of loops.

With an auxiliary thread, crochet a chain of the required number of loops + a few additional ones. Cut yarn and pull through the last loop of the chain. Raise the required number of loops along the back of the chain onto the knitting needle with a working thread. Subsequently, dissolve the chain of the preliminary set and carefully transfer the open loops to the knitting needle.

Note.

When changing colors in the pattern, cross the threads on the wrong side of the work.

Knitting a tie.

Main detail (butterfly).

With a thread of color A, pre-cast on 32 loops. Knit 1 row with purl stitches and 1 row with knit stitches. Carefully unravel the auxiliary thread of the preliminary row and transfer the loops to the second knitting needles. Join in round = 32 sts on each pair of circular needles (64 sts in total).

1st round: knit according to the counting pattern and repeat 8 loops 8 times in a circle.

Work all 24 rows, then repeat rows 1-24 2 more times. Cut yarn C and knit yarn A 1 round with knit loops. Hide the rest of the threads with wrong side. Cut yarn A leaving a long tail and close the loops on the right side with a knitting needle. Lightly steam the finished piece of the tie.

Central part (node).

With thread A, dial 18 loops and knit 1 row of facial and 1 row of purl loops (remove the 1st loop without knitting in each row). Then knit according to the counting pattern as follows:

1st p. (RS): Slip 1 st, then work 8 sts 2 times, k1.

2nd p. (IS): 1 p. Slip off, 8 loops according to the scheme 2 times, 1 out.

Continue in this way until the 24th row. Then tie with thread A 1 row of facial and 1 row of purl loops (slip off the 1st loop in each row). Bind off all sts, leaving a long tail and stitch along the strip.

Guided by the image, form a loop from the central part and thread the main part into it. Sew the edges of the central part from the wrong side. Sew on a rubber band.

Note! The rules of the Domosedka club prohibit the placement of site materials on third-party resources in their entirety. Only announcement is allowed short description), photo and direct link to the source. For personal use, you can print any page. Top seal sign.

The material was prepared and retold with in English Homebody.

Tags:

Knowledge Day is a favorite holiday of all schoolchildren, students and teachers. To celebrate the new school year a beautiful shape and original accessories are selected. In the modern world, handmade products are especially popular. For example, by the day of knowledge, you can quickly and easily knit a wonderful bow tie. This example is available for both experienced knitters and beginners.



This product is universal. It can be knitted for both a preschooler and an older student. Surely, each of them will be pleased to receive such a gift for Knowledge Day.

First of all, such a butterfly should keep its shape well. Therefore, to create it, special attention should be paid to the choice of light yarn. In addition, knitting should be tight (or you can use slightly smaller needles from the recommendations for the yarn used.

In the process of working on any such narrow product with the same pattern on both sides, it is better to use multi-colored knitting needles for hosiery. This will help you instantly navigate among the front and back rows.

The pattern for knitting a butterfly for Knowledge Day is presented below:

So, at the first stage, dial twelve loops and continue knitting in a garter way (that is, the front and back rows consist of front loops). At the same time, the initial hem buttonhole is removed without knitting, and the final one is knitted as a purl.

Further, in all fourth rows, you should decrease one buttonhole on both sides three times. Knit the remaining six loops for eight rows without changing anything. Then, add one loop on both sides. Next, knit a loop near the hem for the front and back walls. Add a couple more times in all fourth rows. After that, knit eight rows with knitting needles without changing the number of buttonholes. Now, on both sides, decrease one buttonhole and repeat the decrease three more times in all 4 rows.

Knit the remaining four buttonholes without change until the length of the narrow part is equal to the girth of the neck with the addition of another three to four centimeters. Next, add one link on both sides and repeat the additions three more times in all fourth rows. So knit eight more rows without changing anything.

At the next stage of knitting a bow on Knowledge Day, you need to make decreases a couple more times in all fourth p. Knit eight rows. without change, add on two sides along the loop and repeat the additions twice in all fourth p. Knit three rows without changing anything and close the buttonholes.

The remaining four stitches are knitted without change until the length of the narrow part is equal to the girth of the neck with the addition of three to four centimeters. The following increases are made on both sides of 1 buttonhole and the additions are repeated three more times in all fourth p. Then knit eight p. without change. Decrease by 1 loop and repeat the decreases a couple of times in all 4 p.

At the last stage of knitting a bow tie for Knowledge Day, the work scheme is as follows: eight p. without change, increase on both sides along the loop, repeat the increase twice in 4 rows. Having knitted the next three rows without change, you can close the loops.

This is such a simple work technique that underlies the creation of a delightful butterfly for Knowledge Day. Such a wonderful product will not go unnoticed, because its uniqueness is undeniable. To do this, you just need to choose an interesting shade of yarn for knitting. In addition, such a butterfly can not only be used as a gift for Knowledge Day, but also used as an addition to any everyday look.

Butterfly for boys is an indispensable accessory in all periods of life. Mornings in the kindergarten, ceremonial lines at school, university awards, weddings - each of these occasions deserves a special outfit, which must be complemented by an original men's accessory.

This article will give several master classes on making a bow tie with your own hands from satin ribbon and fabric. There is also a tutorial on how to crochet an accessory.

Making a double bow tie for a boy from ribbons

A very easy-to-carry elegant butterfly for a boy made of satin ribbons.

You will need:

1) Satin ribbons different widths;

2) Scissors;

3) Lighter;

4) Needle and thread;

6) Hooks.

Step-by-step instruction:

1) Cut two pieces from the tape. The length of one is 20 cm, the other is 30-40 cm. We take one of the blanks and sew the ends together slightly overlapping.

3) We cut out a thin base from the satin for attaching a bow tie, as well as a small jumper. We process all the details with a lighter.

4) We attach a small bow on top of a large one. On the reverse side, we apply a tie tape, but do not glue it. We hide it all with a jumper.

5) Lastly, we attach special hooks that will be a fastener.

Here is such a red butterfly with polka dots can turn out in the end!

We are trying to make a men's accessory quickly and easily from fabric

This master class will tell you how to make a chic double-sided butterfly with your own hands. You will have to work hard on this accessory, but the result is worth the effort!

You will need:

1) Scraps of fabrics of two colors;

2) Needle and thread;

3) Scissors;

4) Chalk or remnant;

5) Sheet of paper;

6) Ruler;

7) Thin doubler (if required);

8) Accessories (hook and regulator).

Pattern:

Step-by-step instruction:

1) We cut out a short and a long part from both fabrics. The selected blue fabric is thinner than red, so it is better to glue it with doubler. To do this, we cut the adhesive material, the size of which will be slightly smaller than the colored part.

2) We seal the blue parts with doubler, fastening with adhesive material.

3) With pins, we chop off short and long blanks with each other. Then we sweep with medium stitches, retreating from the edge by 0.5 - 0.7 mm.

4) We grind on a typewriter along the marked lines, not forgetting to leave a hole in the “tail” so that the workpiece can be turned out.

5) We cut the corners and places of curvature of the workpieces so that after turning they have desired shape. We shorten the narrow part of the parts

6) We turn the blanks, correcting all the edges and corners. Sew again with a regular seam around the perimeter and smooth it out. After that, the threads can be removed and ironed again.

7) We sew up the holes through which the blanks were turned out with a hidden seam.

8) Pass the short piece through the hook, fold the edge inside out and secure with invisible stitches. We put the regulator on a long workpiece. Then we make the second loop (see photo below). And sew the ends.

Checking the functionality of the clasp. If you can adjust the length of the butterfly, you're done.

MK on knitting a butterfly crochet. Method one.

An easy way to crochet a cute butterfly. Perfect for beginner needlewomen.

You will need:

1) Thin yarn;

2) Hook 1.2mm;

3) Scissors;

4) Needle.

Manufacturing steps:

1) First, we collect a chain of forty air loops. Its length should be about 14 cm.

3) We close the open ends of the workpiece with connecting posts without a crochet.

4) We make a small jumper for the bow. To do this, we knit a chain of 10 air loops, also close it in a ring and knit 16 rows in a circle with columns without a crochet. The jumper should be about 5-6 cm long.

5) We fold the blank for the bow in the middle, apply a jumper and sew it from the inside out. You also need to make a few stitches around the edges of the jumper so that it holds tight and does not slip.

And now a tutorial on knitting a butterfly with knitting needles.

You will need:

1) Semi-woolen yarn;

2) Hosiery knitting needles;

3) Scissors.

Scheme:

Stages of work:

1) To begin with, we collect 12 loops and knit with a garter pattern. The first edge loop in the row should be removed without knitting. Knit the last one on the wrong side.

2) We decrease in every fourth row 1 loop on both sides three times. There will be 6 loops that should be knitted without changing 8 rows.

3) Add 1 loop on both sides. This can be done by knitting a loop next to the hem for the front and back walls. Such increases should be done two more times in every fourth row.

4) The next 8 rows go without changing the number of loops. Then we remove one loop from both sides again, repeating this three times in every fourth row. There will be 4 loops left, which we knit without changes until a segment is obtained, the length of which is equal to the girth of the neck plus 3 cm.

5) Again we knit 1 additional loop on both sides, which we also repeat three times in every fourth row. Then - 8 rows without changes.

6) Next, decrease in a loop and repeat this twice in every fourth row. Again 8 rows without changes. Then increase by 1 loop and repeat twice in every fourth row. Next - 3 rows without changes with the closing of the loops.

7) We knit 4 loops without changing, achieving the length of a narrow segment equal to the already connected one. We add 1 loop on each side, repeating this three times in every fourth row. Next - 8 rows, without changing.

8) Decrease 1 stitch. We repeat this twice in every fourth row.

10) We make three more rows without changes, closing the loops.

It turns out a blank, which remains only to be correctly tied around the neck, shaped into a bow.

Video on the topic of the article