A basket of newspaper tubes for beginners step by step with a photo. Useful things from old newspapers Do-it-yourself magazine basket

30.08.2020

Almost all of us have unnecessary newspapers and various magazines and other printed paper products. Many try, of course, to get rid of all this, but you should not do this.

The fact is that from old newspapers you can make a variety of crafts with your own hands, while you can make various and necessary things in the house or decorate the interior of your room well.

The newspaper is very easy to process and you do not need to make any titanic efforts to make any useful thing. Therefore, for making crafts from a newspaper with your own hands, you can connect children as assistants who will have a great desire and interest to do something interesting and useful.

On this moment one of the most interesting and popular areas of do-it-yourself newspaper crafts is considered to be weaving crafts from newspaper tubes.

It should be noted that this activity is not as easy as it might seem at first glance. Here it is necessary to clearly understand all the subtleties and nuances of weaving, and if all this is well studied, then you can do a lot of different and funny things that both children and adults will like.

So, for example, you can make a variety of decorative boxes, caskets, baskets, vases and decorative saucers, in general, for everything that is enough imagination.

Also in this article there are many bright and colorful photos of crafts from newspaper tubes.

However, before starting the creative process, it is necessary to prepare the source material from which the weaving process will begin.

How to make a vine from a newspaper?

Many wicker elements can be combined very well with the interior of almost any room, so most owners of country or private houses would be especially happy to decorate their room in this style.

However, the vine that is used in weaving can cost significant financial costs, but in this case, you can look at cheaper and more affordable material - these are ordinary old newspapers from which you can make wicker crafts, while the cost will be minimal.

So, before the very beginning, it is necessary to make a large number of blanks, from which some kind of interesting craft. Therefore, first the newspaper must be cut across, strips of the same size, after which we take a knitting needle and wind a newspaper strip on it, resulting in a thin and beautiful tube, and so on until a large number of blanks are collected.

Newspaper souvenir basket

One of the elementary crafts from newspaper tubes is a rectangular or square basket. This design is not particularly difficult, it can be done by almost anyone.

For the manufacture of this product, you will have to use a rectangular or square piece of cardboard, you will also need glue and scissors.

So, several tubes must be glued onto the prepared cardboard form, while the distance between them should not exceed more than 2 cm.

Further, it is necessary to bend each tube at the edge of the cardboard upwards, only this must be done so that the cardboard form is at the bottom and the tubes protrude upwards. After that, the base of the frame is ready and you can start weaving.

The weaving itself looks like this: from the very bottom, horizontally, we set the workpiece between the vertical elements and so on to the very top. If the tube is over, then a new tube is put on its tip, pre-lubricated with glue and we continue the weaving process further.

Note!

Upon reaching the required height, all unnecessary must be fastened well somewhere, glued well somewhere. For a longer service life of the product, it is coated with a special varnish.

Thus, from ordinary newspaper tubes, you can make quite interesting and beautiful basket, which will certainly be useful in the house.

At the same time, when experience and skills come in the weaving process, it is possible to make new crafts from newspaper tubes, more complex and uncomplicated in shape.

In this case, almost any thing that you may need in the house can be made from the tubes, for example, a wall shelf for storing small and light items or souvenirs.

Children's crafts

A very funny and exciting activity with paper can be found for kids. In this case, we will talk about an interesting style of working with paper like papier-mâché.

Such an activity will not leave indifferent any child, while the baby will learn certain subtleties of working with paper, with scissors and glue. And most importantly, the child will like it and informative.

Note!

So, first you need to take the main element when creating paper crafts, this is a plate that will be the basis of the future product.

The plate itself is pre-lubricated with petroleum jelly, then small pieces of a white napkin soaked in water are placed on it, this process must be done until the napkin completely covers the plate, only after that it is recommended to use a newspaper for work.

The newspaper also needs to be torn into pieces of small sizes with a diameter of 3-4 cm, but no more.

All pieces of newspaper soaked in water must be settled on upper layer napkins, such an operation must be done in several layers, it is recommended to carry out no more than 7 layers.

After each layer, it is necessary to smooth the entire surface with a brush to evenly distribute pieces of newspapers. The last layer is applied with a white napkin, after which it is necessary to smooth and level everything again with a brush, and only then the product must be left to dry for one or two days.

Note!

After complete drying, the product can be removed from the mold. It is clear that during the process, irregularities at the edges could result, but this can be carefully corrected with scissors.

And the finished product can be painted in different colors, or some kind of drawing can be applied, and in the end, a thin layer of transparent varnish can be applied to the finished papier-mâché style plate.

As a result of this, you will get an interesting and original do-it-yourself craft from newspapers, which can be installed in the most prominent place.

Picture from magazines

Almost every house has old illustrated magazines, someone gets rid of them by throwing them in the trash, and someone stores them to take them to a waste paper collection point.

But do not rush into this, as paper crafts can be made from such magazines. In this case, the only thing that may be required is to cut out various pictures from the magazine and stick them on a piece of paper, resulting in a simple picture that is filled with a certain meaning.

Photo of crafts from newspaper tubes

All women in the world try to make a cozy nest out of their home. In today's world, you can buy a lot of little things to decorate an apartment. But, now more and more representatives of the fair sex, to decorate their homes, use the advice of our ancestors (wickerwork). The most chic are products made from a tree vine, which is harvested in advance. This is a laborious and long process, not every tree branch is suitable for weaving. Proper harvesting of the vine, soaking and drying is required. Invented the most interesting way and easier to make by simply replacing the twigs with newspaper. Therefore, today you have the opportunity to learn how to weave newspaper tubes for beginners, we will tell you all the step-by-step mastery lessons, and we will teach everyone who wants to master this technique. And after a few trial products, creating your own unique masterpiece will be very easy!

How to properly prepare a paper vine

The first stage in work, a selection required material. You can work with ordinary blank paper, but since such paper is quite thick, it is difficult to work with it. It's great if you know where to find the paper that the printers use. As long as it is clean, it is easy to work with in terms of painting the product. But, if not, then we use an ordinary newspaper in large quantities. Using a utility knife or razor, cut the newspaper into wide strips, about 10 cm, but no more. Weaving products is much more convenient and easier if the newspaper is cut into long strips.

We take one strip and put it near us, put a thin, long metal object to the sharp corner. It can be a knitting needle or a bicycle knitting needle. We wind the strip on this knitting needle, tightly enough.

Do not be afraid if the thickness of one end is thicker, it happens. But still, keep an eye on the thickness difference should be minimal. So that the tube has a shape and does not unwind, wet the edge of the strip and fix the corner. In this way, it is necessary to wind about 50 tubes. How many of them will be needed directly depends on how complex the product will be and what size.

Before continuing, you need to decide whether you will already be painting the woven product. Or paint the sticks first, and then you will weave.

It is worth remembering that you need to choose the right varnish. If this is not done, the sticks will become brittle and harsh, the whole appearance will be corrupted. Most the best option, acrylic varnish, which is used for artistic purposes.

The basket made of tubes looks original, on which the text is clearly visible, with one-color or two-tone coloring. This is a great option for a floor box, a photo frame, a small chest. If the product is not complex, you can paint at the end of the work.

Weaving the bottom of the product

The bottom can be perfect different shapes: square, rectangular, round. Let's start experimenting with a vase with a solid bottom. Prepare enough thick paper, cardboard will do and cut 2 circles out of it. It will take exactly two, since the end of the tubes from future racks will be hidden between them. We take the first circle and make marks with a pencil, there will be a rack mount.

If you decide to weave a vase, then the distance between the racks can be quite wide. There is such a type of weaving (oblique), it is allowed to work on not in large numbers stack. After that, glue the ends to the marks and immediately close the second circle. The bottom is made in the same way. square shape if you choose to make it solid. But the bottom looks much more interesting if it is wicker. From such a bottom, weaving a box or basket begins. To do this, we cross some tubes, for example 5 and 7. We take one tube and start weaving from the center, moving in a circle, bypassing the main sticks from above, then from below.

After the tube ends, we increase the next one. The technology of this process is described below. This results in a circle of the required diameter.

The bottom of a square shape is rarely found in a wicker form.

How to build tubules and weaving

Vases are usually woven in a high shape, in order to get such a product, the paper vine has to be built up. With the correct connection of the tubes, the work process will be much easier. And the product itself will look much more attractive. Earlier in the text there was a description that a paper vine with ends of different sizes. This is very convenient for an inconspicuous connection. To do this, you need to insert into the thick end of one stick, the thin end of the other and carefully twist. For a good connection of the joints, it is necessary to coat the thin end with glue. Such a transition is much more aesthetic and completely invisible when the product is painted.

Consider a simple weaving from newspapers, one strip. We attach a stick to the prepared bottom, next to any of the racks. Prepare a suitable form for braiding. As an option for a jar or a bottle, if you want to weave a basket, then a box will do for braiding. Next, raise all the racks to the top and secure them with something, a clothespin will be good for this. We braid the racks with a previously fixed vine. If you want to weave a basket with two sticks, then the weaving technique is the same.

It is more difficult and longer in time to braid in the style of a rope, for this weave two tubes. They are placed on different sides of the rack, and then intertwined between the racks. Weaving from newspaper tubes made using this technique looks very beautiful, and the basket will be durable.

An interesting way of linear weaving, oblique weaving (in a spiral). This method is ideal for weaving vases or glasses, in this weaving only racks are used, they are intertwined and slightly shifted.

All main types of weaving are solid, each new row is a continuation of the previous one. If the product is with a lid, then its weaving does not differ from the main craft, only the height is lower.

When the whole process of making crafts is completed, it must be painted. To do this, you can use a brush or spray can, if you wish, you can decorate with patterns. What patterns will be made of (from satin ribbons, embroidery or beads) and which ones, fantasy will help with this. The last step in the work will be varnishing the crafts.

What is woven from paper vines

Many people think that in this way you can’t make many products, of various modifications. And in the process of mastering this technique, they realize that they are mistaken. They say "appetite comes with eating" so here. When everything is studied, all the work is completely clear, then your own fantasy wakes up, to come up with your own original crafts.

To weave a basket of newspaper tubes, weave the form with ordinary weaving. Then, from opposite sides, weave a pair of tubes, which is the basis for future pens.

Weaving from newspaper tubes for beginners, it is worth learning from something simple: cups, coasters, candy bowls. Further, you will already be able to create more difficult ones, such as a laundry basket, it will significantly big size and the frame must be strong enough.

You can make a chest for sewing accessories, its complexity is in weaving internal partitions. The most common wickerwork is considered a vase. For originality of such a product, make the edge openwork.

Newspaper vine products are easy to work due to their complex technique anyone can learn. And after looking at least once at examples of such works, you will certainly want to create such beauty at home.

Such weaving from newspapers for beginners simply cannot leave indifferent all those who have a craving for beauty. And it will become another one of your hobbies, and maybe the only one!

Weaving from newspaper tubes video tutorials for beginners

Also, for a visual acquaintance with the process of weaving newspaper tubes for beginners, we recommend that you study several videos from experienced designers and craftsmen. These reviews will talk in detail about the technology as well as illustrative examples of finished products.

Video: Lesson twisting tubes from newspapers - secrets and nuances

Video: How to weave a basket with a rectangular bottom

Video: A basket of magazine tubes for beginners.

Video: Newspaper tube basket for beginners

Video: Weaving a heart basket from newspapers

Turn your ideas into reality, and you will succeed, we wish you success in your endeavors!

Below we have put together a gallery of newspaper tube weaving photo ideas to help you customize and choose exactly what you like. We offer more than 50 photo options:

To make the bathroom cozy and stylish at minimal cost? We know how to get a bright paper or towel basket without leaving home.

We found a great way to turn a few old magazines into a stylish and roomy basket.
We will need:
Chinese stick;
newspapers or magazines;
glue and brush;
clothespins;
2 pieces of cardboard and a carton;
any heavy object as a press;
acrylic paints.

Getting Started:

1. We take a stack of magazines or newspapers and carefully tear out the pages. It is desirable that they be the same size.

2. Armed with a wooden stick (it can be a Chinese stick or stick-skewer), we begin to twist the pages. We do this diagonally, carefully lubricating the paper with glue.

3. We fix the finished tubes on clothespins and let them dry. After that, slightly straighten them so that they become flat.

4. The bottom is the basis of the future basket. It is important that it be reliable. Take two pieces of cardboard. Draw lines on one and place symmetrically on the sides and corners paper straws, and glue the second rectangle of cardboard on top. Press down the bottom with the tubes with a press and let the structure dry.

5. Let's move on to weaving. Place the bottom of the basket on top of the box, or place cardboard around the sides. Secure the paper tubes with clothespins. This will ensure the accuracy of the pattern.

6. Take one tube and start passing it alternately over and under the vertical ones, imitating weaving with a vine. Connect the horizontal tubes one to one with glue.

© Maria Coisitas

7. Once you have decided that the height of the future basket suits you, carefully bend the edges of the vertical tubes, inserting them into the loops, and hide the ends of the horizontal ones inside. Remember glue.

8. Our beautiful basket is almost ready! It remains to give her gloss. To do this, take acrylic paints and use a brush to color the product inside and out. For natural effect use two shades and apply paint with a spray gun.

9. A little more time for the paint to dry. And voila! A basket for towels, rolls, bottles and other beautiful little things is ready.

Newspaper tube weaving is based on traditional wicker weaving. Currently, it has gained great popularity, because this material is always at hand, and by connecting fantasy, you can create beautiful crafts from newspaper tubes. Master classes on creating crafts for beginners will help with this. After the hand is “full”, you can start creating more complex products.

Clean printing paper is best for weaving. It is soft and spreads evenly. If it is not possible to find such paper, then sheets of ordinary newspapers can be used to create original crafts from newspaper tubes. You can work with office paper, but it is quite thick, and this is inconvenient.

Basket

newspaper or magazine sheets;
cardboard;
knitting needle or wooden skewer;
PVA glue;
scissors;
ruler;
tassel;
pencil.

Cut the newspaper into squares measuring 10 by 10 centimeters (longer tubes will require larger squares).

Put the needle on the corner of the sheet and wrap the paper around it tightly. Pull out the needle. To prevent the tube from unwinding, smear the edge of the newspaper with glue before twisting. Carry out such an operation with all sheets of the newspaper.

From cardboard, cut 2 identical circles for the base of the basket. The volume of future crafts depends on the diameter of the circles.

Glue 8 newspaper sticks onto one cardboard circle as shown in the photo.

Glue the second circle on top. For 10-20 minutes, this workpiece should be put under the press.

After that comes the most important stage - weaving. It is necessary to lift one tube from the workpiece vertically and glue the tube horizontally to it, as shown in the photo.

This tube must be brought behind the nearby frame vine so that it bypasses it from the outside, and the next tube from the inside. If the vine with which we braid ends, then we take another tube and, as it were, screw it into the edge of the last vine, and continue to weave.

Covering the frame tubes from the outside, and then inside, weave all the rows until the desired height of the basket is obtained.

When the last row is made, cut the tube of the vine obliquely, smear its edge with glue and bring it inside the basket to the limit. Cut the frame tubes too, grease with glue and fill the crafts inside.

To make a handle, you need to weave 2 tubes with a bundle. So that they do not unravel, it is better to glue them. Bring the edges of the handle inside the basket and grab it with glue.

If desired, a finished basket of newspaper tubes can be painted, decorated with decorative flowers, beads, decoupage.

Hat

Required materials and tools:

newspapers;
scissors;
glue;
Bowl.

Make 10 long newspaper tubes (you can see how to make them in the previous master class).

Fold 8 tubes crosswise, as in the photo.

Connect the remaining 2 tubes to each other and lead them over a horizontally lying stack.

Weaving is carried out immediately with 2 tubes using the “rope” technique. Bring one tube under the base of the hat, the other - from above, cross each other. Do this with all ends of the base cross.

Weave the second circle with the same technique.

On the third circle, braid each base vine with a “string”, dividing them among themselves.

To make the hat even and neat, we apply the weave to the convex bottom of the bowl and use it as a shape.

For convenience, we fix the vines with clothespins over the edges of the bowl. So they will not get confused and interfere.

Continue weaving until the hat is deep enough.

Remove the bowl and start weaving the brim of the hat.

Cut the vine that was woven and bring its edges inside the craft.

Take a new tube and thread it into the loops near the base vines, as shown in the photo.

Do this with each base vine, inserting new tubes into the loops next to it.

To weave the fields, you will need one vine, which will braid each tube with a "rope" technique.

Weave until the margins are wide enough.

After that, bring all the remaining base vines inside the crafts and fill them into the cells.

Cut off unwanted ends with scissors or wire cutters.

You can decorate the hat with acrylic paints, decorate with artificial flowers, ribbons.

Fungus

Required materials and tools:

newspapers;
wire;
scissors;
glue;
Bowl.

For the base you need 8 newspaper tubes. In order for the fungus to keep its shape well, a thin wire is inserted into the tubes. From them, make the base in the shape of a square, as shown in the photo.

To make the base for the fungus neat and convex, you need to place it on a small bowl. Continue braiding the vines further, but now sticking to the shape of the bowl.

After the mushroom cap is ready, remove the bowl. Bend the tubes in such a way that a leg is obtained.

Braid the inside of the mushroom and go out on the leg, as shown in the photo. At this stage, the leg should be slightly widened so that it does not turn out to be straight.

The wire at the base of the tubes will not allow the craft to unravel, so the edges of the tubes can simply be wrapped inside the fungus.

To decorate the fungus, you need to paint its leg with white paint and the hat with brown. After the whole craft must be covered with a colorless varnish.

panel

Crafts from newspaper tubes with your own hands are a great way to decorate the interior. Exclusive option - panel.

Required materials and tools:

newspaper sheets;
PVA glue;
brush for glue;
knitting needle or skewer made of wood;
acrylic or food paints;
office rubber bands;
scissors;
strong threads;
needle.

Progress:

Bast shoes

Souvenir bast shoes can be made from newspaper tubes, which are considered a family talisman, a symbol of longevity and health.

Required materials and tools:

sheets of newspapers or magazines;
PVA glue;
brush for glue;
knitting needle or skewer made of wood;
acrylic or food paints;
stationery knife;
scissors;
linen thread.

Progress:

Spread the sheets of newspaper across the long side, bend in half and cut with a clerical knife.
Wind the resulting sheet onto a pencil diagonally from the right corner so that one edge is slightly wider than the other. Lubricate the edge of the sheet with a small amount of glue so that the tube does not unwind.
Insert three tubes into each other, fixing with glue. Such long tubes need 5 pieces.
Place the tubes according to the photo and start weaving, taking into account that the right or left product is planned.

At the end of weaving, thread the end of the tube with a knitting needle along the entire length of the sole.
After the bast shoes are ready, you can paint them with the Oak stain on water based and then apply white acrylic paint. The paint is applied with a semi-dry brush in random strokes, creating the effect of antiquity.
When the paint is completely dry, coat the product with a primer. To do this, mix PVA glue with water in a ratio of 3 to 2. This will make the bast shoes strong.
To decorate the bast shoes, it is enough to use linen thread, wrap the edges of the bast shoes with it, creating the effect of antiquity.

Frame

Another way to use newspaper tubes is to make crafts and decorations from twisted spirals, such as creating an original photo frame.

Required materials and tools:

sheets of newspapers or magazines;
PVA glue;
tassel;
knitting needle or skewer made of wood;
acrylic paints;
scissors;
white sheet of paper;
cardboard.

Progress:

Tree

An original way to use newspaper tubes is to create an unusual interior tree.

Required materials and tools:

sheets of newspapers or magazines;
PVA glue;
tassel;
knitting needle or skewer made of wood;
acrylic or gouache paints;
scissors;

Progress:

Prepare tubes.
Fasten 13-15 tubes together, wrapping them with a thread and a strip of paper smeared with glue. Thus, a tree trunk is formed.
With the next tube, smeared with glue, wrap the formed trunk in a spiral to the required height. If the tube ends, insert the next one into it and continue weaving.
Divide the trunk into 2 unequal parts, forming branches. Wrap each branch with a tube smeared with glue.
Separate the branches again and wrap them around. Continue dividing until 1 tube remains in each branch.
Trim the last branches to the desired length and form curls.
Wrap the lower part of the trunk with another layer of tubes, slightly thickening it.
Cover the finished tree with a mixture of PVA glue and gouache.
After the glue has dried, varnish the product and decorate.

Box

Required materials and tools:

sheets of newspapers or magazines;
PVA glue;
felt-tip pen;
knitting needle or skewer made of wood;
scissors;
dye.

Progress:

Prepare tubes and a box of a suitable shape, which will be braided during work.
To begin with, form the frame of the future product. To do this, at the bottom of the box, mark the places where the main tubes pass, given that the more often they are located, the denser and stronger the weaving will be. There should also be warp tubes at the corners of the box.
Glue the tubes according to the markup.
Start weaving the walls of the box. To do this, glue an additional tube to the base tube, which will be used for weaving. Braid warp tubes the classic way: the first is outside, the second is inside, the third is outside, and so on.
In this way, braid the box completely. If the working tube ends, it is “built up” by inserting an additional one into it, smearing the edge with a small amount of glue.
At the end of the work, cut off the edge of the working tube at an angle of 45 degrees and hide it inside the product. The main tubes are also cut off and brought inside, fixed with a small amount of glue.
Paint the finished box with acrylic or water-based spray paints.
After the paint has completely dried, decorate the product using satin ribbons, artificial flowers and beads.

Egg

Required materials and tools:

sheets of newspapers or magazines;
PVA glue;
knitting needle or skewer made of wood;
scissors;
dye.

Progress:

Prepare tubes from newspapers.
Put three tubes crosswise, fixing the place of intersection with a drop of glue.
At the intersection, glue the fourth tube and start weaving. Bend one tube over 2 others, take the next one and bend over the other two in the same way, then the next one and so on.

Cup

Required materials and tools:
- sheets of newspapers or magazines;
- PVA glue;
- knitting needle or skewer made of wood;
- scissors;
- dye.
Progress:

Flowers

Required materials and tools:
- sheets of newspapers or magazines;
- PVA glue;
- knitting needle or skewer made of wood;
- wire;
- wrapping;
- scissors;
- dye.
Progress:
1. Prepare tubes from newspapers, paint them yellow, green and brown, wait until they dry completely.
2. 3 short tubes yellow color insert the wire and wind the non-wooden skewer in turn, forming spirals. These will be the pistils of the flower.
3. Take 2 more yellow tubes. Bend one of them in half, and wrap the second with a loop around the first and begin to braid without tightening. This will be the first petal. Also weave 2 more yellow and 3 brown petals.
4. Similarly, make leaves from green tubules, only with a sharper bend.
5. When all the blanks are ready, collect the flower. Fasten pestles together with wire. Attach brown petals around the pistil with a second layer, and then yellow ones. Attach a stem of 3 green tubules to the flower head with a wire.
6. Wrap the stem with wire for strength. In the process of wrapping, attach a leaf.
7. To hide the attachment points and wire, wrap the stem with wrapping paper.
8. The flower is ready, if desired, it can be varnished.
Heart

Necessary materials and tools
- sheets of newspapers or magazines;
- glue Moment;
- knitting needle or skewer made of wood;
- wire;
- scissors;
- dye.
Progress:

A basket of newspaper tubes. Master class with photo

Master Class. Weaving baskets from newspaper tubes

I came across on the net such creativity as weaving from newspaper tubes. Intrigued, I decided to try it. I reviewed more than a dozen master classes. Outwardly, the products are in no way inferior to braided rods. And for home use, they are quite durable and for a gift - nice!
Using various varnishes, paints and impregnations for coating when weaving, you can create braids of all colors of the rainbow.
And by decorating the baskets with beads, flowers, ribbons or applications using the decou page technique, you can turn them into works of art.
Here's what I got.
You will need:
1. Newspaper sheets
2. PVA glue
3. Knitting needle
4. Scissors, clerical knife
5. Paint (acrylic), varnish (finish varnish), alcohol-based stain (origon, larch, lemon ....)
6. Brushes for glue and paint.
7. Basis for weaving
Photo 1

Operating procedure:

First, you need to determine the direction of the paper grain. The direction must be longitudinal. Direction can be determined in several ways. Here's one: stretch the edges of a piece of paper between the nails of two fingers. In the transverse direction of the fibers, the edge will become wavy, in the longitudinal direction of the folds will not form. Stripes of this size will make thin tubes for an elegant product. If you need thicker tubes, then the width of the strips and the diameter of the knitting needle need to be increased.
I paint the tubes with a brush on an ordinary oilcloth. I only use alcohol-based stains. On the recommendation of one master class, I tried to paint the tubes with a water-based stain - I ruined everything. When wet, the place of gluing diverges and the tubes unfold. Don't repeat mistakes.
Stage 1: Preparation
We mark the newspaper into strips of 7 cm.
Photo 2

On a lining board, cut the newspaper into strips with a clerical knife.
Photo 3

The angle of the spokes on the newspaper strip - 10°-15°.
Photo 4

You need to start winding the strip very tightly, winding the edge of the newspaper around the knitting needle. The tubes are white if the white field of the newspaper strip is left on the right.
Photo 5

Secure the edge of the newspaper with glue.
Photo 6

Photo 7

Ready-made tubes at this stage can be dyed in the desired color if desired and allowed to dry well. You can also paint after the finished product. And if you cover it with paint and varnish on top, then no one will guess that this basket is made from an ordinary old magazine (newspaper).
Photo 8

Stage 2: Weaving
We will start the work with weaving the bottom. It all depends on the size of your product. For weaving the basket presented to your attention, you will need 30 (thirty) tubes 50 cm long.
We take 10 tubes (hereinafter: faces) 45-50 cm long. Lay them out in pairs.
Photo 9

We fold the working tube in half and wrap it around the first pair of rays.
Photo 10

The beginning of work can be marked with a marker on the edge of the beam.
Photo 11

We braid each pair of rays with a rope. The working tubes cross, then one working tube goes on top of a pair of rays, the other on the bottom. As soon as the length of the working tube ends, we increase it (insert the end of the next tube into the hole of the previous one).
Photo 12

Photo 13

Weave two rows to the pair of rays marked with a marker.
Photo 14

Weave the third and fourth row in one ray.
Photo 15

We direct the working tubes to the middle of the bottom.
Photo 16

We form the edge of the bottom. With the first ray (marked with a marker), we go around the next one, directing it to the center of the bottom and so on in a circle.
Photo 17

We start the last ray from below into the loop of the first ray.
Photo 18

Next, we braid each ray of 4 (four) rows with a rope, slightly bending the rays from the center.
Photo 19

We decorate the 5th (fifth) row with wooden beads with a diameter of 16 cm. You will need 6 pcs. beads.
Photo 20

Photo 21

6 (sixth) and 7 (seventh) rows, knit with a rope. The work is almost finished! It remains to cut off the excess length of the working tubes and fill them between the rows using a knitting needle.
Photo 22

We cut the removed ends of the working tubes with scissors.
Photo 23

To make the handle of the basket, leave 3 (three) rays on each side, separating them into clothespins. We drip a drop of glue at the base of the remaining rays and cut them with scissors.
Photo 24

Photo 25

Photo 26

We connect the ends of the tubes of the basket handle.
Photo 27

Before weaving the handle, we drip a drop of glue on the edge of the tube and fix it with a clothespin. We braid the handle with a tube along the entire length.
Photo 28

Photo 29

At the end of the weaving of the handle, we drip a drop of glue onto the end of the tube and fix it with a clothespin. The main work has been completed.
Photo 30