How to remove a stain from a stroke from clothes. How to remove putty from clothes at home. …after a water-based concealer

rituals
06.07.2020

The stroke corrector is special agent designed to correct errors in the text. The stroke corrector is especially popular among students and pupils. However, it is not uncommon for the correction fluid to stain clothing or other items. This can happen if you did not completely screw the liquid cap on, and also brushed the vial off the table with an awkward movement. In addition, you can accidentally get dirty with a dry corrector in the form of a tape. However, the resulting stain on clothes can be washed off.

What to do if there is a stain on the clothes from the stroke corrector
  1. Never throw away the corrector. Familiarize yourself with the composition of the correction fluid.
  2. You need to determine what type of stroke corrector is. A tool for correcting errors in the text can be made on a water, emulsion, alcohol basis. dry proofreaders are also on the market.
  3. Having determined the type of corrector, begin to act immediately. The sooner you start "fighting" with the stain, the more effectively you will remove the contamination from the clothes.
  4. Your cleaning steps will depend on the corrector type.
Removing dirt from clothes depending on the type of stroke corrector
  1. Water based corrector. If you have stained your clothes with a water-based corrector, then consider yourself lucky. This type of correction fluid comes off easily from clothing. You can clean the stain in the usual way: soak the item for a while (for 20-30 minutes) in cold soapy water, and then wash it in the machine in accordance with the mode suitable for this fabric. The stain will be removed easily and without difficulty.
  2. Concealer on an alcohol or emulsion basis. You will have to “fight” with a stain from an alcohol-based corrector. Wait for the corrector to dry on your clothes. Try to gently clean the part of the dried corrector. The remaining contamination must be removed with a cotton swab dipped in cologne, tonic or vodka. After that, wash the item in the machine, in accordance with the temperature regime.
  3. Solvent-based corrector. The hardest stain to remove is solvent-based stroke corrector. To get rid of pollution, you will need a piece of clean cloth; cotton swabs; as well as a solvent, white alcohol, nail polish remover (any of the options). Turn the product inside out. Lay a clean cloth over the front of the item to protect the item from the solvent. Carefully treat the stain with a cotton pad soaked in solvent, moving from the edges of the stain to the center. To avoid unpleasant consequences, test the effect of the solvent on the inner seams of the product. If the thing is not deformed, the paint is not washed off, then you can safely proceed to cleaning. When finished, wash the item in the machine in the usual way.
    Be careful! If you notice that the use of solvent damages the fabric, do not clean the item yourself. Be sure to go to the dry cleaners. Under no circumstances should you wash your clothes. None of the dry cleaners will give you a guarantee that the stain from the stroke corrector will be removed after you wash the item. The action of water and powder can lead to the fact that you will have to say goodbye to your favorite clothes forever.
  4. Solid stroke corrector. Removing the stain from the corrector tape is not difficult. Soak the item in cold soapy water for a while (40-60 minutes). Then carefully remove the tape. Wash the item on the delicate cycle in the machine.
Removing stains from a stroke corrector on clothing depends on both the type of corrector and the type of fabric. Of all types, stains from a water-based stroke corrector and corrector tape are most easily washed off. It is most difficult to remove dirt from delicate fabrics: velvet, silk, wool. It is better to take such “delicate” things to the dry-cleaner immediately, in no case, without first washing them.

White spots from putty on clothes are quite persistent. But there are many folk methods, allowing you to quickly wipe the stroke from the fabric. Start removing stains as soon as possible, as it is much more difficult to cope with chronic pollution. The choice of cleaning method will depend on the material from which the item is made and the composition of the corrector.

You can quickly get rid of putty stains on clothes if you follow certain rules:

  1. Before you start removing stains, you need to pay attention to the composition of the stroke. Depending on which component is the base, the most effective cleaning method is selected.
  2. When working with a stain from the corrector, it is advisable to make blotting movements and wipe the contamination from the edges to the center. Otherwise, there is a risk of increasing the area of ​​the spot.
  3. If the putty has spilled in a thick layer and has had time to dry, then it is recommended to scrape it off before using special products. upper layer corrector with a flat object. For example, a nail file, a dull knife, a ruler or a soft brush.
  4. Do not soak or wash items that have been streaked in hot water. Heat helps to fix the stroke in the fibers of the fabric.
  5. Clean areas around the contaminated area should be dampened with cold water to avoid streaks.
  6. Be especially careful when cleaning delicate fabrics. It is not recommended to clean mechanically or with strong detergents.
  7. Before using aggressive substances and solvents, it is necessary to test their effect on an inconspicuous area of ​​the product. For example, on the inside seam with wrong side.
  8. Products with bleaching properties should not be used to clean colored items, and alcohol-based solutions should not be used on synthetic fabrics.

The composition of the corrector

Before rubbing a stroke from clothes, you should pay attention to its composition. The basis of the corrector can be:

  • water;
  • alcohol;
  • solvent.

A ribbon stroke is also distinguished.

Depending on the type of putty, you can choose gentle or more potent agents.

Water

The easiest corrector to remove is one that is based on water. The water stroke can be easily washed off if the item is soaked before washing.

Action algorithm:

  • pour cold water into the washing basin and add soap or washing powder;
  • soak the product stained with water putty;
  • leave for 25 - 30 minutes;

Do not rub water-based corrector. This can lead to the fact that the pollution is only absorbed deeper into the fabric.

Alcoholic

Removing traces of a stroke based on alcohol is somewhat more difficult than from a water-based corrector. But the basic rule remains the same - output like like. That is, to remove a stain from an alcohol-based corrector, you must use alcohol or alcohol-based solvents.

If the stain has had time to dry, then you can carefully peel off the top layer of the stroke with a blunt flat object.

Mechanical cleaning is contraindicated for delicate fabrics such as wool, silk, velvet.

Then you will need to moisten a cotton pad in pure alcohol, vodka, cologne or other alcohol-containing liquid. However, colored alcoholic beverages such as cognac should not be used. Also in specialized stores you can find a tool called "Antishtrich".

With a dampened cotton pad, it is necessary to blot the stain from the stroke and rub it lightly. After that, wash the item with the powder by hand or in the machine.

In this way, you can get rid of white spots even on black trousers or a jacket.

Solvent Based

Most often, solvent-based correctors are available in the form of pens or pencils. Stains from such a stroke are considered the most difficult to remove. To get rid of them at home, you must follow the instructions:

  1. For cleaning, you can use acetone, nail polish remover, white spirit, refined gasoline or special stain removers. Kerosene can be used on very dense fabrics.
  2. Check the effect of the selected product on an inconspicuous area of ​​​​the product.
  3. If the stain is dry, you can rub it with an old toothbrush.
  4. Turn the item inside out and place a piece of fabric under the dirt on the front side.
  5. Soak a cotton pad in the cleanser of your choice and work on the stain, moving from the periphery to the center. If the splashes of the stroke that have fallen on the clothes are very small, then it is better to use a cotton swab.
  6. After the stain disappears, you need to wash the product in soapy water or in a machine with washing powder.

The listed products are quite aggressive and are not suitable for cleaning delicate fabrics.

Therefore, expensive items made of silk or velvet, stained with a solvent-based stroke, are recommended to be dry-cleaned.

Ribbon

It is easy to remove the putty made in the form of a tape.

To do this, you just need to soak the product in cold water with the addition of dishwashing detergent. Wait 30 - 40 minutes and peel off the corrector tape. If you can’t do it manually, then you can use an unnecessary toothbrush. Then the thing must be washed in the usual way.

old stains

Fresh stains from a stroke are much easier to remove than old ones. Over time, the corrector forms a hard film on the tissue, which has to be affected by special methods.

Before cleaning, you can scrub the top layer of the stroke with a soft brush or blunt object.

Method number 1:

  • moisten a cotton pad or cotton swab with alcohol if the spots are small;
  • treat the contaminated area;
  • leave the thing in this state for 10 minutes;
  • if the stain does not come off, then it is worth repeating the procedure;
  • rinse thoroughly and wash with powder.

Method number 2:

  • wet a cotton pad with facial tonic;
  • rub the dried stain;
  • repeat the procedure if the contamination has not disappeared;
  • wash the item in the usual way.

This method is well suited for thin fabrics.

Method number 3:

  • turn the thing inside out;
  • put cotton fabric from the front side;
  • moisten a cotton pad with acetone and apply to the stain for 10 - 15 minutes;
  • then take a clean disc and moisten it with white spirit;
  • rub the pollution;
  • rinse and wash the item with fabric softener to get rid of the specific odors of cleaning products.

Knowing how to get rid of stubborn white spots on clothes can save you precious time and save your favorite piece of clothing.

Today, almost everyone has a stroke corrector: from a schoolboy to an office worker. This stationery is used as a special tool for correcting errors in any text, but sometimes it goes to the wrong place and the question arises of how to remove a stroke from clothes. You will learn about all the ways to solve such a problem from this article.

General rules

The most common problem when working with documents and correcting them is soiled clothes. It is especially unpleasant when you notice drops on things not immediately. If you still immediately saw unsightly white drops on a jacket, trousers, skirt or dress, follow this algorithm:

  1. Blot the stain from the corrector, but do not rub it deep into the fabric.
  2. Study the composition of the stroke and determine what exactly it is made of, what is the main connecting component.
  3. Start immediately cleaning the soiled area - the sooner you start, the better the effect.
  4. Operate depending on the type of stroke.

Important! Moms who love to pamper their children with various toys will do well to know thathow to remove slime from clothes .

Types of corrector

There are such types of corrector bases:

  • Water;
  • Alcohol;
  • emulsion;
  • Solvent based;
  • In the form of roller tapes with a dry corrector.

Important! Do not remove the corrective stationery with an unsuitable tool. You can only mess up the entire document.

Removing a stroke from clothes

The problem of how to clean a stroke from clothes can be solved very quickly. But this is on condition that you act exactly as described below.

water stroke

To easily solve the problem of how to wash off the stroke from water-based clothes, you just need to understand that the water itself will be the solvent. Further simplifying the whole process is the fact that just such a corrector easily moves away from the fabric, if you act in this way:

  1. Soak clothes for 20-30 minutes in cold soapy water.
  2. Wash in washing machine in a mode that is suitable for this particular fabric.

The stains will go away easily and without much difficulty.

Important! The store sells along with a stroke a special liquid for dissolving it. If you often encounter such a problem, most likely it will be easier for you to immediately purchase such a tool in the kit.

Alcohol or emulsion based stroke:

  1. Wait for the stroke to dry.
  2. Use a cotton swab dipped in cologne or vodka to remove the streak from clothing.
  3. Wash your clothes in the washing machine - as you usually do.

Important! If there is no vodka, you can also use medical alcohol or any other alcohol-containing product. The bottom line is to increase the concentration of alcohol in the dried mixture, due to which the corrector will become more liquid, not so saturated and durable. This means that it will easily move away from the fabric from any thing and it will not be difficult to wash the stains from the stroke.

Solvent based primer

The most difficult stain to remove is solvent corrector stains. How to erase a stroke of this type - this issue is solved in the following way:

  1. Take a clean napkin and a cotton swab.
  2. Soak a cotton swab in thinner, white spirit, or nail polish remover.
  3. Turn your item inside out.
  4. Apply a clean cloth to the front of the product so as not to stain with solvent.
  5. Very carefully treat the stained area of ​​\u200b\u200bthe thing with a cotton swab, move it from the edge of the stain to its center. To avoid damaging the fabric, try the solvent effect on inside products. If there are no consequences, feel free to proceed.
  6. Wash clothes in the washing machine as usual.

Important! If the solvent cannot be used on the fabric from which your item is made, you do not need to clean and wash the item yourself. Contact a cleaning professional. If the thing is washed, but the stroke remains, no dry cleaning will remove the stain. Water and powder sometimes lead to the fact that the product can simply be thrown away.

Concealer solid

Special efforts in order to remove a stroke from clothes will not be required:

  1. Soak the item in cold soapy water for 40-60 minutes.
  2. Remove the tape very carefully.
  3. Wash your item in the washing machine on a delicate cycle.

Important! Surely you will need helpful tips About,how to remove ink .

  1. To properly remove a stroke from clothes, look not only at the type of corrector base, but also at the type of fabric. The most difficult to remove stains from delicate fabrics.
  2. Delicate fabrics should be taken to the dry cleaners immediately. No need to prewash.

Important! If you use putty a lot, try saving a little. Find out,how to dilute the corrector .

School pupils, students, and office workers quite often deal with such a thing as a proofreader. Rough handling can cause streak marks that are not easy to remove. For this reason, many people are interested in how to remove stroke stains as quickly and efficiently as possible without harm to clothes. It is absolutely not necessary to refuse to wear clothes soiled in the proofreader or to throw them away at all - there are many effective ways how to remove a stain from a stroke without loss. If you don’t know how to remove a streak stain, don’t be disappointed ahead of time - this guide on how to remove a corrector stain from clothes will help you understand what methods and recipes should be used.

5 Useful Rules for Stroke Removal

You may have some idea of ​​how to remove concealer from clothes, and even then, a guide on how to remove putty can help you. It is also not superfluous to remember the rules that will help you deal with any pollution resulting from working with the corrector:

  • Before removing putty from jeans and other clothing, blot the stroke with a tissue or paper before the stain is completely dry. This will greatly facilitate the subsequent removal of the stain.
  • To increase the effectiveness of the wash, soak the item in warm water for 10-15 minutes before removing the stroke from the clothes. This will especially help if you want to eliminate a dried stain.
  • Do not rub a fresh stain - this will only increase its area and help it penetrate deep into the fabric.
  • Before removing a streak stain from clothing with a caustic or aggressive substance, check the reaction of the fabric to the selected product. To do this, apply a small amount on an inconspicuous place. Restoring damaged clothing will be more difficult than washing corrector, so be careful.
  • How to remove a stain from stroke putty quickly and without a trace? Treat dirt from the inside out.

Now that you know the useful tips for removing a stroke, you can begin to figure out how to remove a stain from a corrector, and what kind of tools can be used to quickly achieve your goal.

Ways to remove streak stains from clothes

Before you remove a stain from a stroke, it is very important to find out what kind of corrector it was left with. The fact is that proofreaders come in several bases - water, emulsion and alcohol. The question of how to remove a water-based stroke stain is usually not worth it, because for this it is enough to soak the clothes in water and wait until the contamination is completely dissolved in it. You will have to fight with an emulsion or alcohol stroke, and you need to do it correctly. How to remove putty from clothes without risk? Try recipes:

  • Powder. If you don't know how to remove a putty stain, use an ordinary laundry detergent. Please note that this method of how to remove a putty stain is only suitable if the stroke is water-based - in other cases positive result not guaranteed. Wash clothes in a washing machine or a container with the addition of powder, then dry - the stain will definitely disappear.
  • Ammonia. How to remove stains from alcohol-based putty? This is an actual question, the solution of which is simpler than it seems. Take a suitable container and pour warm water into it. It needs to dissolve a small amount ammonia and stir it thoroughly. Before removing the corrector from clothing, soak a cotton swab in the prepared solution and apply it to the stain. It is enough to hold the tampon for 10-15 minutes, then wash and dry things thoroughly.
  • Petrol. Before you wash the corrector from your clothes with gasoline, make sure that the gasoline is purified - you need to buy this at a hardware store, and not at a gas station. Also, do not forget before washing the corrector, make sure that the clothes are not made of synthetics - they simply will not withstand such a procedure. If everything is fine, soak cotton wool in clean gasoline and apply it to the stroke stain. Hold for a few minutes and send the clothes to the washing machine.
  • Denatured alcohol. How to wash the corrector from trousers if there was no gasoline at hand? You can use denatured alcohol for such purposes. You need to fold the gauze in several layers, and then put it under the stain from the inside of the clothes. From above, the surface of the stain is treated with cotton wool soaked in denatured alcohol. When the stain is completely removed, the clothes should be washed and dried well.
  • Special tool. Not many people who are interested in how to remove a stroke are aware of the existence of special liquids that can be bought at an office supply store. They are specially designed to remove corrector from various surfaces, including clothing. Follow instructions.
  • Solvent. How to remove putty from clothes if there is no opportunity or desire to spend money on a special product? You can use a tool similar in principle of action - White Spirit or any other similar solvent. Just don't use solvents if you have synthetics.
  • Vodka. If you know how to remove a corrector stain on clothes, but there is nothing at hand, you can use vodka or other strong alcohol without color. Apply some alcohol to the stain, then wait for 15-20 minutes and wash the treated clothes in the washing machine.

The proofreader has long been adopted by office workers, schoolchildren with students and people who constantly work with documentation. A slight wave of the brush, and the error disappears. The main thing is that your hands do not tremble, and no one distracts, otherwise the magic tool will spread like an ugly white spot on your favorite blouse or skirt.

Don't panic

Fresh traces of a stroke are immediately wiped with a dry or damp cloth. Move from the edges to the center, and not vice versa, so as not to smear the stain and not increase the scale of the tragedy. First aid has been provided to clothes, now you need to arm yourself with a jar and read the composition. Further steps to remove the corrector depend on the basis used for its manufacture.

Water, alcohol or oil

You can wash off the water stroke by locking yourself in the nearest toilet with a sink. A handkerchief or a piece of cloth will come in handy, and a paper napkin will do. Wet a rag under the tap, wring it out and run it over the stain several times, being careful not to rub it into your clothes. The traces of the corrector will become invisible.

Arriving home, the soiled thing should be soaked in a bowl of warm water. Find in the nightstand or buy a bar of laundry soap that removes almost any stain. The place where the stroke has spilled, rub, rinse and hang the clothes to dry.

If there was no laundry soap at hand, powder will come in handy, detergent for dishes or shampoo. Squeeze a pea on the stain, lather, leave for 10 minutes, dip in clean water.

Important: The dried corrector should be scraped off the fabric with a toothbrush, and then proceed to washing.

Alcohol varieties of corrector
The presence of alcohol in the composition of the stroke complicates the problem. You can’t get rid of ordinary soaking and soap, you will have to arm yourself with vodka, cologne or shaving lotion. A tonic that contains alcohol, or a special solvent for corrector, is suitable. You can buy the latter at a hardware store.

Remove dried putty from clothing with a brush or nail file, being careful not to stain the fabric around the stain. Turn the skirt or blouse inside out, placing a white fabric under the trace of the stroke.

Arm yourself with a cotton swab or a makeup remover pad. Moisten the cloth around the stain with water so that the corrector does not spread. Apply vodka or cologne to the stick and gently move towards the center, trying to clean off the product. You can not press hard so that the stroke is not absorbed into the fabric more strongly.

Keep a piece of white cloth or cotton wool handy to remove the remnants of the cleaner along with the corrector. Immediately put the processed thing in the washing machine, setting the maximum mode. It is advisable to add a product like Vanish, designed to combat various contaminants.

Important: Do not treat the stain from the corrector toilet water or spirits. They have little alcohol, but a rather persistent smell, which is not easy to get rid of.

Hard case
Emulsion-based putties are rare. Not lucky enough to meet just such a stroke? You will have to make every effort to get rid of it.

Items must not be pre-soaked or washed. Be sure to remove dried residues with a brush. Apply the anti-corrector agent from the wrong side, placing a clean, light-colored fabric without patterns that will absorb dirt.

An oil or emulsion base can be dissolved:

  • white spirit;
  • methylated alcohol;
  • kerosene;
  • ammonia diluted with water in a ratio of 1 to 2;
  • nail polish remover or acetone;
  • paint thinner.

Some use gasoline. It does remove the corrector, but the lingering smell is absorbed into the garment and doesn't fade after the fifth wash with fabric softener.

Apply 2-3 drops of the selected agent to the problem area of ​​the tissue, spreading it over the entire surface of the stain with a cotton swab. Detect for 15 minutes, allowing ammonia or acetone to dissolve the putty. Soak a cotton pad in the liquid from the corrector, clean off the stroke from the edges with gentle and gentle movements. After getting wet paper napkin removing the remaining stains. Wash the item immediately with a quality powder.

Tip: You should check how the fabric reacts to a particular substance. A drop of liquid intended to remove the corrector is applied to the internal seams. If the color of the clothes in that place has not changed, there is no threat.

How to wash dry concealer

Is there a dash tape stuck to the skirt? You will need a solution of laundry soap, which is moistened with a corrector. Carefully separate the tape from the clothes, brush off the remaining putty with a brush. Fix the result with washing.

Rescuing clothes from the corrector does not take much time and will cost less than buying a new thing. But it is better to dry-clean silk and other delicate fabrics, because only professionals know what products to use so as not to completely ruin the thing.

Video: how to remove the corrector from clothes