Hairpin in kanzashi style. Beautiful master class - do-it-yourself kanzashi flower hairpin Step-by-step instructions on how to make a kanzashi flower hairpin

24.08.2020

Fashion for original jewelry and accessories will always exist. The modern trend is hand-made style. Things made into hairpins, headbands, brooches look very impressive and fabulously beautiful. It is not difficult to make such an ornament. In addition, it does not require expensive materials. Simple Tips help create original decoration hair that's right for you.

materials

To make kanzashi hairpins, you will need the following:

Frame (base), which you buy on purpose or take from unnecessary decoration.
(color and width - at your discretion). You can also use the right fabric.
Scissors.
Ruler (more convenient to measure blanks).
Lighter, candle for processing edges and joining layers of the workpiece.
Tweezers, clamp, tongs.
Threads with a needle.
Thermal gun.
Decor (beads, beads).

So, nothing special is used. Tapes are available and inexpensive. If there is no thermal gun, you can do without it.

How to add simple elements?

To make beautiful kanzashi hairpins, it is enough to master just one simple way to make parts.

Blanks can be made single-layer, two- and three-layer. These balls are best combined from ribbons of different colors, and if there is a suitable fabric, then with squares from it. Choose the size of your choice.

To make single petals, work like this:

Cut the ribbon into squares.
Process the cuts over the flame (melt the edges).
Fold the square in half.
Fold the resulting triangle in half twice.
Melt the bottom edge in a flame and firmly connect with a clamp or tweezers so that the layers of the petal are completely fused along the bottom border.

How to make a petal from several squares?

To make a double or triple petal, proceed as follows:

Cut out the required number of squares. For one petal - 2 or 3, respectively. You can use tapes of the same width, then you will have to cut the lower border of the workpiece in the future. If we immediately take the squares different sizes, you do not need to do this.
Fold each square in half individually. And once again in this way - all the resulting triangles.
Lay the prepared parts one on top of the other in accordance with the size (larger - smaller).
Fold the prepared multilayer structure in half.
Melt the bottom edge of the part by treating the flame of a candle or lighter and pressing it with tweezers. If your bottom border is uneven (the tapes were the same size), trim it first with scissors.

make it easy!

The simplest decorations are easy to make on the basis of invisibility in the form of a flower.

The execution sequence is as follows:

Prepare the required number of single, double or triple petals made using the technology described above.
If you prefer petals that resemble the shape of a ringlet, cut off the bottom corners of the blanks.
Connect successively all the petals in a circle, using threads (fishing line) with a needle, a heat gun or fusing blanks by heat treatment.
Cut a circle out of cardboard that is the same size or slightly smaller than the base (back side) of the flower.
Cut out a circle with a larger diameter than the cardboard part from the fabric or tape.
Place the cardboard piece on wrong side fabric and pull with a needle and thread the edges of the circle along the contour.
Glue the prepared part with cardboard to the flower. The reverse side of the flower turned out to be neat and dense. No gluing between the petals is visible.
Apply glue to the hairpin and press the completed flower to it.
After drying, decorate the front side: glue a bead in the center, you can glue a drop-shaped pearl in the middle of each petal. Apply glitter gel or nail polish to the tips of the petals.
Make the second such hairpin (usually they are made in pairs) in the same way.

Kanzashi hairpins: master class

A more complex, even asymmetric design can be made on the basis of an automatic hairpin, metal or with a rubberized insert.

Work like this:

Take the same flower as the main element, as for small hairpins. Make all the petals and combine them into a flower using the technology described above. In different hairpins, you can change the number, size of the petals, combinations of single and multilayer parts.
In this case, the bases in the form of a circle for a flower can be omitted, but it will be necessary to make a strip substrate made according to the size of the hairpin. This frame element will be made in the same way as a circle. However, you should not take too thick cardboard if you need to glue the decor on an arcuate surface.
To create a beautiful hairpin from ribbons (“kanzashi”), in addition to the central flower, make a few more smaller ones, but according to the same principle.
Place smaller flowers symmetrically or asymmetrically with respect to the central one.
Perform elements in the form of leaves and twigs. Place them on the base to the right and left of the central part.
Use additional decor from beads, feathers and other suitable elements.

As you have seen, it is not difficult to make beautiful kanzashi hair clips. The main thing is to master one of the basic ways of adding blanks, and you can combine them into a finished decoration according to the model from a photograph or, with a little imagination, in accordance with your individual author's idea.

Traditionally, the first photo shows pieces of fittings that were used in the lesson, for your convenience. As you can see, the number of types of ribbon material is two (rep and satin), the number of shades used is 4 (they have already been mentioned earlier). A convenient basis for any kanzashi flowers is felt circles, although they are sometimes replaced with foamiran.

Start with large 5 cm squares. To make a triple sharp petal, bend each of them individually twice.

Fold the triangles in this order: green-white-red. Curl the petals and fasten, singe. The bottom of these petals is cut off.

Rounded petals should be made from red and black small squares of 2.5 cm. They will be of two types: just red and black and red. Fold the squares in half once. Overlay the black triangle on the red one. Lower the sharp corners down, pinch them together and form a rounded petal, singeing the tape gently. You should immediately stipulate the moment that all the small petals from the tape 2.5 * 2.5 cm from the bottom do not need to be cut.

Insert small black and red details inside large triple petals. Now you will get complex details that consist of all the colors involved.

From the remaining fragments, you need to make rounded petals for shamrocks. The outer parts of these parts will be double red, and the inner parts will be the same as before, black and red. Glue 6 pieces.

Glue all 6 large petals onto black felt.

Stick a crystal on the felt, sheathe it with beads. Press small white parts very tightly to the middle. Then cut off the excess part of the base.

Glue the shamrocks obtained in step 6 between the main parts.

Make 12 rounded green petals for the inner part in the same way as the black and red parts, only the petals will be single.

Glue the green parts into a flower, decorate with the middle. Then glue the entire structure on top.

It is convenient to cut the strips of green and red reps diagonally in half with a hot soldering iron. Fold the strips in half first. After such a peculiar cutting, you will have 2 halves from each part, one of which should be used in the future. How they look is clear from the presented photo.

Kanzashi - national Japanese ornaments for women's hairstyles. Previously, they were worn with kimonos. Japanese women have always been famous for grace and restraint, but they devoted a lot of time to their hairstyles. The hairpin (kanzashi) has become a traditional hair ornament.

What is kanzashi

This type of jewelry became popular in Japan in the 1700s when Chinese fashion made its way to the island. The most expensive hairpins of that time were made from the bones of a crane, and were intended exclusively for the nobility.

They are hairpins and combs with a variety of decorations.

How to wear kanzashi hairpins in Japan

Modern kanzashi are very diverse. Hairpins are made from various materials: wood, silver, gold, plastic. Jewelry are precious and semi-precious stones, corals, artificial imitations of expensive materials. In Japan, there is still a clear gradation in wearing this type of jewelry. It implies the age and social status of the woman.

In European countries, there are no restrictions, and girls wear beautiful and bright hairpins without hesitation.

In modern Japan, kanzashi is chosen not only based on the above criteria, but also by seasons and months.

How to make kanzashi yourself

By the way, it is very easy to make kanzashi hairpins with your own hands, even if you have never done this before, or even hear such a name for the first time.

Basically, homemade kanzashi are made from satin ribbons. Therefore, now we will consider several options for how to make hair clips. Kanzashi translates as "hairpin", respectively, this will be the basis. And with the help of small pieces of fabric or ribbons, flower petals are folded, subsequently connected with tweezers and glue.

Here is such an interesting decorative art. If you do not have satin ribbons, use any other fabric that is available. There are many interesting and affordable kanzashi workshops for beginners and for crafters who want to improve their level.

List of materials needed to make kanzashi

Below is the easiest way to make kanzashi hairpins with your own hands. The master class is designed for beginners.

So, you will need the following materials and tools:

ribbons (5 and 4 centimeters wide) of the colors you like;
a ruler, a simple pencil, chalk or a bar of soap to make the necessary marks;
scissors;
needle and thread;
ordinary tweezers or tweezers;
lighter;
glue;
the basis;
auxiliary jewelry (beads, beads, sequins).

Algorithm for creating colors for kanzashi

When everything is prepared, you can start creating.

Another way to make flowers from ribbons

Now we present you more complex technique performing a floral ornament on hairpins. And in this case, the petals will be flat and wide.

Prepare strips of satin ribbons 2 centimeters wide and 9 centimeters long. You will need 14 pieces. Take at least two colors. Scorch the edges of the ribbons so that the threads do not spread further.

You will also need a needle and thread. Now start making petals. To do this, bend one strip in half and diagonally, then in half again. Using a thread and a needle, sew the base in such a way that a recess is obtained in the middle. Make six more of the same petals, stitching them together to make a flower. It's okay if the leaves are not firmly fixed. Everything will be fixed later.

In exactly the same way, make a second flower from the remaining stripes of a different color. Glue the two resulting decorations together, and do not forget to make the middle using a bead. Wrap the hairpin with ribbon and glue the flower to the base.

Here's how easy and quick you can make your own hair clips. Kanzashi are very delicate and beautiful. In Japan, such decorations are selected, depending on the season. Although we do not provide for such measures, nevertheless, there is an unspoken rule when warm season bright and colorful colors are preferred, and in cold times, dark shades predominate.

What you need to make a rose from ribbons with your own hands

Of course, no floral ensemble is complete without exquisite red roses. Rose is the queen of the flower world. Therefore, it is not surprising that many of the fair sex prefer jewelry in the form of this flower, this includes hairpins. Kanzashi hairpins decorated with roses look elegant and impressive.

So, you will need:

barrette;
tape 2.5 centimeters wide;
glue gun;
lighter;
tweezers;
needle with thread;
scissors.

How to make a rose

Here's how you can make your own ribbon hairpins. Kanzashi are not just beautiful decorations, but also a great way to develop your creative skills.

Kanzashi hairpins and more

In addition to flowers, you can also make figures of insects and animals, various representatives of flora and fauna. Kanzashi hairpins look great in combination with artificial berries, for example, mountain ash.

Having learned how to make such beauty, you can decorate not only your hair, but also make bouquets that you can take to a celebration or decorate your home table with them. You can make paintings, brooches, bracelets and other decorations.

Needless to say, kanzashi hair clips make the perfect gift for any occasion.

Experiment, try to master new types of decorations, complicating and improving your level. Then you can create not just kanzashi ribbon hairpins, but real works of art that will attract the attention of everyone around.

Kanzashi hairpin master class for beginners This is a wonderful versatile and elegant hair ornament. The hairpin shown in the master class in white and blue colors, first of all, can be worn to school. A girl of any age can decorate her hair every day with such a wonderful accessory. In addition, a hairpin on a clip is a convenient technique, a simple design allows you to independently model a hairstyle in a matter of seconds, not only at home, but even in the school lobby, if, for example, it is winter outside and you have to walk in a hat. And as a festive school accessory, a beautiful hairpin is also suitable, it can be supplemented with a strict form for the first or last call. Each mother can make a similar hairpin for her schoolgirl daughter on her own, focusing on a detailed master class.

For a worthy exhibit of the school collection of hand-made accessories, we need a certain list of materials.

What is needed for a kanzashi hairpin master class for beginners?

wide satin ribbon dark of blue color- 4 details of 5 * 10 cm;
openwork ribbon with a white rhombus texture - 4 parts 2.5 * 10 cm each;
narrow blue ribbon (of the same shade as the main details for masking the central part of the bow) - 1 piece 1.2 * 12 cm;
squares from wide satin ribbon white color - 16 parts of 5 * 5 cm;
squares from a wide dark blue ribbon - 8 parts 5 * 5 cm each;
squares of a dark blue ribbon of medium width - 8 parts 2.5 * 2.5 cm;
squares of a white ribbon of medium width - 16 parts 2.5 * 2.5 cm;
white or blue felt circle 2 cm in diameter;
oblique stretch trim - allows you to make the clip (the base of the hairpin) removable;
half bead of white color with a diameter of 1.6 cm.

Kanzashi hairpin master class for beginners in stages:

Prepared for work wide satin ribbons of dark blue color and lace stripes of rhombus texture combine along the length. Initially, you should cut out parts 10 cm long for the first and second cases. It is convenient not to glue, but to singe the ends at this stage.

Prepare 4 pieces of similar white and blue designs. Then bend in the center, forming loops of a magnificent bow. At the base, make paired folds and singe. The lower and most magnificent part for the school bow is ready.

Glue all 4 loops and wrap in the center with a thin strip - a dark blue ribbon of the same color. Get a flirty bow.

Prepare squares for the central flower: 2 white with sides of 5 cm and 2.5 cm, 1 dark blue with sides of 5 cm and 2.5 cm. A five-layer sharp petal will be modeled from this ensemble of accessories. Since it will not work to immediately fold all 5 layers into a perfectly even part, you must first make a large triple petal of the white - blue - white layer, then a small two-layer petal of the blue - white layer, then insert one into the other.

Combine in all squares 2 opposite corners.

Turn the blanks into triangles.

Layer the triangles on top of each other. The big ones are separate from the small ones.

More interesting:

Model a large three-layer and a small two-layer petals.

Insert one into the other. This is how a fragment of the central flower is obtained.

To model the smallest central flower, take the scorched squares. Bend in half, then direct the other two sharp ones to the right corner in the resulting triangle. Round the gap.

A small flower will consist of 8 round petals, make them and glue them on a felt base with a diameter of 2 cm and add a white half-bead 1.6 cm.

Make 8 large petals for the center flower and glue together.

Also prepare small white single petals for fastening between the parts of a large flower.

Suggested kanzashi children's hairpins master class with flowers are made in white and blue colors, and therefore they are perfect for wearing not only on ordinary days, but also on holidays and to school. To make a decoration with a sliding satin material, practice working with the ribbon, mainly singeing it, because this is a necessary step in processing the satin sections. It is enough to touch the protruding threads with a lighter flame for a moment so that the workpieces become more accurate.

In the proposed version of the hair accessory, small click-clack hair clips were used, but they can be replaced with soft rubber bands or glued to any other base. Girls will definitely love these exquisite decorations. And if a mother makes them with her own hands for her daughter, then they can be considered exclusive.

To create one hairpin with a kanzashi flower, you need to prepare:

- 16 pieces of white satin ribbon 5 cm long, ribbon width 1.2 cm;

- 11 pieces of blue satin ribbon 4.5 cm long, ribbon width 1.2 cm;

- 2 felt circles with diameters of 2.5 cm and 4 cm;

- click-clack hairpin;

- a metal bead hugger and a pebble with a diameter of 0.8 cm.

How to make kanzashi children's hairpins master class from ribbons?

Cut the required number of 5 cm pieces of white tape. After processing the cuts with a flame, start creating unusual domed petals. Position the line vertically. Pinch the central part with your finger and bend the upper half relative to the lower one by 90 degrees. Make another fold in the central part to clearly align the 2 halves of the segment. The result is a double petal with a sharp corner.

Turn all prepared white segments into the same petals. At the base, the tape can be carefully glued or singed with a flame and pressed down with your fingers to hold the ends together.

Cut the indicated number of pieces of blue ribbon, the length of which should be 4.5 cm. Prepare the petals from the blue parts in the same way, only the parts will be slightly shorter than the white ones (by 0.5 cm).

Make all 11 angular petals.

Each petal must be bent in half lengthwise. Holding your fingers at a straight bottom, pierce the workpiece with a needle, sew with a thread. Do only 1 stitch. Next, string all the petals on the thread in turn.

Pull the thread until it stops to get a flower.

This method of attaching parts will make the workpiece voluminous, in this case glue is not needed.

Make a second flower with white petals. Since it will take 11 parts to make it, a round hole will remain in the central part. However White flower will be the bottom tier, so the hole in the finished product will be hidden.

On the back of the white circle, glue a small felt circle 2.5 cm in diameter. This will be the basis of the entire white and blue flower.

Use the second circle with a diameter of 4 cm to attach the click-clack hairpins. Make an incision in the central part, insert the tongue of the hairpin, stretch it until it stops. If necessary, glue the upper metal part of the hairpin to the felt. Prepare a bead hugger and a pebble to decorate the middle.

Glue the metal decor to the center of the blue flower.

The second flower (white) will be about 1 cm larger in diameter.

Glue the blue tier onto the white.

Glue the entire structure to the felt holding the barrette. Prepare two absolutely identical hairpins for a young student.

A bright and indispensable decoration for a schoolgirl girl is ready. Such kanzashi children's hairpins master class can be made using black or burgundy ribbon. And the pebble in the central part can be blue.