In Rus', buttons on clothes were an item of luxury and wealth. They were made of copper, gold and silver, and only the most experienced and famous tailors were trusted to tailor them. To date, the button has become a common piece of clothing with which you can fasten the product. Consider interesting options for neat and beautiful technique button sewing.
First, select a button by color, type and size. It should be in harmony with the material. To check if a button fits, thread it through the buttonhole on the garment before work, and you will immediately feel by the tightness of the entry whether it suits you.
Before sewing, make markings for fastening using a ruler and a bar of soap. Thread a single thread into the needle, and fasten in the form of a couple of stitches on the material, then bring the needle to the wrong side. Attach a button and inside product, pass the needle through any of the two holes. Sew 3-4 stitches, sewing each. To complete the work, fasten the thread to the back of the fabric and cut.
Pass the sewing thread through the needle, folding it in two layers, and tie a small knot at the end. On the front side of the product, make a small stitch and fasten the thread into a loop, then cut off the knot with scissors. Insert the button into the needle, and make the first puncture, as shown in the photo. For ease of use, divide the holes into pairs and sew each side with 3-5 stitches. Sew all holes individually to avoid skew. Finish sewing by pulling the thread from under the button to front side, then wrap around the formed leg 3-4 times. In the last step, pass the thread through the eyelet, tighten it tightly and cut.
Pick up a thick needle, a strong thread, then thread it. Make a knot at the end and cut off the excess tail. If necessary, smooth the material with an iron or steamer, and also remove the remaining threads from the old fittings. It is very difficult to determine the height of the button stand by eye; for this, use improvised means - a toothpick or a match.
What is a button? A common piece of clothing these days. And a long time ago it was the most important magical amulet that scared away evil from a person. Even the word “button” or “button” itself comes from the word scare, but it can also become your amulet, programmed for wealth and good luck. Would you like to try the magic effect of buttons on yourself? To do this, make your most cherished wish and select the sewing method shown below. In the evening, fasten a button to the wrong side of your favorite garment.
How to sew a button on a leg to a fur coat, coat, sheepskin coat or jacket? It would seem that it would be simpler, there would be only a needle and thread. However, in order for the sewn button to hold securely and not come off at the most inopportune moment, you still need to know some secrets and be able to sew buttons correctly and securely.
This video shows how to sew a small flat button to a shirt.
Even a man can sew a new button to his trousers, jacket or shirt. This is one of the simplest repair sewing jobs that everyone needs to be able to do. It is only important to follow simple rules and techniques.
You can also sew on a flat button using a special foot on a sewing machine, but most often sew on a button have to be done by hand, especially since many buttons (on a fur coat, sheepskin coat, leather jacket, etc.) have a “leg” that cannot be made on a typewriter.
1. First of all, inspect the place where the button came off, remove the remnants of the thread. Sometimes a button comes off "with meat" (especially for sheepskin coats and fur coats), so this area needs to be restored. If the fabric is thin, then it is enough just to glue the wrong side with adhesive material. The torn parts of the fur of a fur coat or sheepskin coat must be joined with a furry seam, strengthened with special "amplifiers", and in some cases it will be necessary to glue a patch on the wrong side, cutting out the fur (sheepskin coat) in this place. On a leather jacket, this is easier to do, just lubricate rubber glue patch and torn area (wrong side). Wait for the glue to dry, apply the patch and press firmly. For example, you can gently tap the patch with a hammer.
2. Decide what kind of button you need. A flat button with two or four holes, or on the reverse side, it should have a stem. If the button is flat with holes, then you need to select the thread to match the color of the button, but it is imperative that its shade matches the thread that other buttons are sewn on.
The threads of a button with an eye are almost invisible, so the color of the thread no longer plays such an important role.
3. To sew on a button comfortably, select a suitable size hand sewing needle. A thick and long needle with a large eye is suitable for outerwear. regular needle medium thickness and length (darning) is used for sewing a button to cotton fabric (men's shirts). A short and very thin needle, suitable when you need to sew a button on a silk blouse.
4. Select a suitable thread that matches the thickness of the threads of the weave of the fabric. In other words, the thinner the fabric, the thinner the thread and needle. Conversely, for a button with an eyelet (drape coat, leather coat, etc.), you can even use floss to clean your teeth. A button sewn with such a thread will hold on very firmly. The denser the fabric, the thicker the thread and, of course, the needle should be. This rule is especially important to observe when sewing on the buttons of outerwear.
5. Cut at least 50 cm from the spool. Cut the thread with very sharp scissors so that the cut end of the thread can be easily inserted into the eye. It is inconvenient to work with a long thread, it will constantly get confused, sometimes even forming knots that cannot be untied. We'll have to unravel the threads and start work again.
With a short thread, it is convenient to sew on a button, but with it you can only sew on one button at a time.
Pull the thread through the eye of the needle and align both ends of the thread. It is better to sew a button with a double thread. Twist the ends of the thread together, wrap a couple of times around your index finger and continue twisting with your fingers so that a knot is formed. Cut off the remaining ends below the knot, leaving about 0.5 cm.
Even for the smallest buttons, you need to make a leg, in any case, wind around its base with several turns of thread. This must be done on any product, not only on jackets, fur coats or sheepskin coats. The fact is that when a button is fastened into a loop, it should have a little "freedom" for the thickness of the fabric and easy passage in the loop. In addition, a button with a small stem or with a gap will last longer. since the threads and fabric will not "strain" during fastening.
The simplest technique for sewing on a button with a stem is that a match is laid between the button and the fabric. This will allow in the future to wind the "leg", which is necessary for almost any button. The leg is needed not only to make it easy to thread it through the loop, the leg protects the fabric, such as a silk blouse or a dress made of thin material, from tearing.
For thin fabrics, you can use a paper match, twisted into a tube of paper. To sew a large flat button onto a heavy wool coat, use a wooden match for the oven. Do not use a toothpick instead of a match, it is easy for it to prick during operation.
Find the place where the button was sewn before. Carefully remove the remnants of old thread. Now pierce the fabric from the inside, trying to get to the point where the thread previously passed. Pull it out completely, circle past the match and thread it through the eyelet, pulling the thread taut. Stick the needle on the other side of the match. For buttons with four holes, apply stitches with a cross or two parallel stripes, following the pattern in which other buttons are sewn, remembering to sew each successive stitch with different sides matches. After making about ten stitches, bring the needle out in the gap between the button and the fabric.
Video on how to sew a large button to a sheepskin coat.
Pull out the match carefully. Wrap the thread remaining in the needle around the vertical threads so that a kind of stem forms. For the leg, you will need to wrap the thread around at least five times. Then insert the needle through the base of the stem into the tissue. Pull the needle from the inside out and pass it through the stem again, repeating this operation several times.
For the last time, insert the needle through the stalk of the stem on the wrong side of the fabric, cut the thread with scissors almost near the eye of the needle and tie the two ends of the thread into a strong knot on the wrong side of the fabric. Trim off excess threads. The button stem is now securely fastened.
Do not forget that large buttons for sheepskin coats, fur coats, leather jacket and a raincoat, as well as on any coat or jacket, must be sewn along with a buttonhole. They are sold in hardware stores, but you can also use just flat buttons of small diameter.
In order to sew a button to a fur coat or sheepskin coat, you need to pick up a very strong and thick thread. When you need to sew a lot of buttons, and the thread is not too thick, thread a double thread into the eye of the needle, as a result, the thread will be folded four times, this will speed up your work.
Seemingly simple operation sew a button, sometimes causes difficulties and you have to sew it "as it will turn out." Any, even the simplest, business has its subtleties, including sewing on a button. The imposition of stitches in a button with a cross, a square or in another way, if it has four holes, is a matter of your imagination and taste.
Please note that in the VKontakte group there is a video on how to sew a button to a sheepskin coat. Sign up for a group. We constantly post various short video tutorials and articles with useful tips.
Video how to sew a button on a sewing machine using a special foot.
At the factory, buttons are sewn on a special sewing machine, however, this is also possible at home. After all, almost every household sewing machine with a zigzag stitch has a foot for sewing on buttons. It is only necessary to master this operation a little and the process of sewing on buttons will become easy and fast.
Firstly, the foot must be used specifically for sewing on buttons so that it fixes the button well. Under a non-button presser foot, it may slip and you will break the needle on the machine and scratch or even split the button with the needle.
Sew on a button with a foot carefully at minimum speed, having previously set the required zigzag width according to the distance between the holes of the button.
There is no special sewing machine needle for sewing on a button with the foot, but be aware that a needle that is too thin can bend or break if it does not fit into the hole in the button.
The Seagull sewing machine has a zigzag stitch and buttons can be sewn on it. But, unfortunately, the Seagull sewing machine does not include a special foot for sewing on a button.
This may be true, but there are many people who have never sewn on buttons and do not know all the tricks of sewing on a button correctly.
There are several ways to sew on buttons, and all of them are quite simple.
To begin with, it is worth mentioning the size and shape of the buttons. In addition, it is worth knowing that there are buttons with a "leg" and without it.
Each button manufacturer sets its own size range. All button sizes can be specified in millimeters (mm) or lines (L).
If you decide to order buttons, then you need to coordinate the calculation system with the manufacturer. For example, if you decide to order size 30, then their size is 34 mm, and if 34L is indicated, then the size is 21 mm.
Here is a table to help you better understand these two number systems:
All these data are for round buttons. Square buttons are measured diagonally, while custom-sized buttons are generally measured on their longest side.
If the "leg" is present, then this is a plus, as it reduces the tension that usually occurs between the button and the material when you open and close clothes. This means that the "leg" will protect the clothes from tearing.
It is also worth noting that the leg hides the threads with which you sew on the button, which means that the button can be sewn with a thread of any color, even if this color does not match the clothes.
But even if the button does not have a "leg", you can make it from the thread that you use to sew on the button.
Tip 1: if you lose a button and there is no spare one, then you will have to buy the right amount of suitable buttons of the same type, and alter all the old buttons on the clothes.
Tip 2: choose the right size, as a button that is too small will constantly unbutton, and one that is too large will not allow you to fasten normally. Simply slip an unsewn button through the buttonhole on your garment to see if it fits.
Tip 3: if the fabric is dense, then the needle and thread should be suitable - the threads are thick and the needle is thicker and with a large eye.
Types of needles for hand sewing:
Tip 4: Use sharp scissors, as blunt ones fray the tip of the thread, after which it is difficult to insert the thread into the eye of the needle.
Tip 5: Remember to wear a thimble to protect your fingers while sewing on the button.
We select suitable threads and buttons
strong threads
To sew on buttons, you need strong thread so that the button can last longer. You can check the strength of the thread with your hands - if you hardly broke the thread, then it is strong.
Thread thickness
Choose threads of the appropriate thickness so that they can be used for the selected fabric. For example, if you want to sew a button on a summer shirt, then use thin threads, not thick ones.
thread color
Choose a color that matches the button. If the button has a stem, then the color of the thread should match the color of the fabric, and if the button has holes, then the color of the thread should match the color of the button itself.
Try not to use knots.
1. Fold the thread in two additions.
2. Insert the ends of the thread into the eye of the needle.
3. Grab a couple of threads of fabric with a needle where you are going to sew on a button, and then thread (not completely) the thread.
4. Thread a needle and thread into the loop formed and gently tighten.
5. When the thread is fixed, you can safely sew on your button.
1. Fold 4 threads together and thread them into the needle. In this example, a carabiner needle is used, but you can use a needle with a large eye.
2. No need to tie bartacks and knots on the threads. Just pierce the needle in the desired place, pull the thread and leave a long tail.
3. Now we string a button on a needle and thread.
4. Tie the threads.
5. Trim excess thread.
From the back side it looks like this:
The button can have 2 or 4 holes. As a rule, a button with holes is sewn in such a way that there is a small leg under it. This makes buttoning more comfortable, as the button is not pressed tightly against the fabric. But you can also sew in the usual way - without a leg.
Helpful Hints:
* When sewing a button on a thin fabric, you can use twisted paper or a toothpick, and if on a thick drape fabric, then choose a match, and preferably thicker (an oven match is ideal).
* To better protect the fabric from tearing, a small button is sewn to the wrong side while sewing on the main button.
Button with holes can be sewn on different ways. Here are some of them:
Option 1.
Option 2.
* The thread must be folded in half, make a knot at the end of the thread and cut off the extra tail (after the knot).
1. You can use a match or a toothpick for convenience. Just put it under the button and sew on.
2. On the wrong side, try to make neat punctures in the same places.
3. Since the thread is folded in half, you will need to make 3-4 stitches. If the button has 4 holes, sew 3-4 stitches for every 2 holes.
4. Now remove the match from under the sewn button and make about 8 turns with the thread under it (button). It turns out that you wrap the thread around the thread that is sewn to the fabric.
Greetings to all lovers of sewing! Let's talk about such details of our clothes as buttons. They are present on almost all of our things and from time to time they come off, get lost, and they need to be restored. ? Surely, many of you have faced this problem. Not everyone likes this activity, but sometimes it is simply necessary to do this.
At first glance, it may seem that nothing is easier than sewing on, it can’t even be. I think so too, but to my great surprise, some of my clients bring me their clothes only for me to sew buttons on them. And, oddly enough, there are women among them.
It would seem that for women such a thing should not be a problem, but not everyone likes to do something with their hands, including sewing on buttons. It's not hard at all to do this, though. But, it is desirable to do it correctly. That is what we will do. Perhaps you will learn something new for yourself.
Buttons are different. The most common of them:
Buttons with two holes
Buttons with four holes
Buttons on the leg (on the half leg)
Each of them is used for different types of clothing. It depends on the size of the button and on the product on which it will be sewn. Let's take a look at some of these uses. I have prepared a detailed step-by-step photo report. For clarity, I took thick threads and materials of a contrasting color, so that you can see better. On real products, it is desirable to select threads to match the button.
These buttons are the most commonly used. First you need to draw a cross with soap, the center of which will coincide with the center of the button. Tie a tight knot and cut off the excess thread if it sticks out of the knot. Pierce the fabric with a needle as shown in the photo. The knot should be between the diagonal lines, and the needle should come out on the sewing line of the button.
After that, we put the button on the needle and sew it with a few stitches to the fabric. If the thread is folded in half, then it is enough to pierce three times. It is desirable to fall into the same punctures. Before completing the process, the needle should be brought out between the fabric and the button on the front side, and a knot should be tied, grabbing the threads. For strength, it is enough to make two (three) such knots and cut the thread.
Here is the button sewn on. Pay attention to what the reverse side looks like. There are no knots on it. The threads lie evenly and are concentrated in one place.
These buttons are also used on different types products, from to coats. I took a big button. Since there are more holes in it than in the previous one, there can be many sewing options. It depends on your imagination. I decided to sew with a diagonal cross, so I placed the holes at an angle to the intended soap cross. If the holes are arranged along the lines, then the sewing principle will be the same.
Similarly to a button with two holes, we make three punctures, in the directions we need, and bring the needle out between the fabric and the button on the front side. This can be done both from below and from above.
Buttons with four holes are not very convenient in the sense that the area for sewing them to the fabric is larger than the slot of the buttonholes into which they are threaded. Therefore, very often they stretch the loop. To prevent this from happening, it is better to pull the threads a little. To do this, under the button, you need to make two (three) windings of the main threads. After that, tie a knot on the threads.
Cut the thread and finish the job. The button is sewn on, a neat cross turned out on the back.
In this case, the knot also remains on the front side, but can be located on the sewing line of the button.
After several punctures, the thread is brought to the front side and secured with a knot under the button head. The knot is attached to the threads, not to the fabric.
No knots are visible under the hat, but on the back everything is clean and smooth.
On products such as (fur coats, sheepskin coats), and on those whose selection is rather thick, buttons are sewn in a special way. In one place, not one, but two buttons are used. From the front side and from the back side. This is done for strength.
A knot is tied and the fabric is pierced in the same way as in the case of a button with two holes. The thread is threaded into one of the holes of the top button, and a match is placed under it. This is done in order to create a distance between the surface of the material and the button.
Then at the same time it is necessary to sew the top and bottom buttons through the same punctures. After several punctures, the thread is brought to the front side, the match is removed, and all the threads are pulled over with several turns of the main thread. A false leg is created on which the button will be held. It is necessary to tie a few knots and fasten the thread. The height of the leg depends on the thickness of the selection of the product.
Here's what happened as a result. Buttons are sewn on both sides.
As you can see, there really is nothing complicated, and everything is done elementarily. Now you know how to sew on buttons by hand. If you have never tried it, then now you will definitely succeed.
1. When using a two-ply thread (when sewing on buttons with holes), make sure that the thread is not twisted. Otherwise, the threads may not lie very evenly, which will ruin appearance buttons.
2. For thin fabrics, it is better to use thin threads, for thicker ones, thicker ones.
3. When using a thread in two additions, there should not be many punctures. Two or three is enough. If there is a single thread, then there should be more punctures, which may not be very good for the material.
4. Make sure that the direction of the threads, when sewing on buttons, is parallel to the buttonhole, and not perpendicular to it.
Knowing these little tricks, you can sew on any button without any problems. And, if you want to make an unusual detail out of it on your product, then I suggest you look at the article "". There you will see how creative these ordinary items can be. With your own hands, you can make a button not just an ornament, but a talisman that will fulfill your desires.
I hope that everything has become clear to you in the issue of sewing on buttons by hand, and now you can easily handle it yourself.
If the material was interesting to you, share it with your friends. Give them the opportunity to learn more about sewing and needlework.
Subscribe to the news and stay up to date with all the events!
How to make rubber veins on fabric