Homemade badges and key chains. Key chains from the oven. How to make a DIY keychain from polymer clay

Many people are very fond of all kinds of knickknacks like cute key rings, pencil cases, backpacks, etc. Today, you can buy any such trifle, since the range of goods is incredibly large. But you must admit that a craft made by you personally will look unique and bring more joy than another Chinese product. And since you can make a keychain with your own hands from almost any materials that can be found at home, there should not be any big difficulties in this matter. In this article, we will offer you some interesting ideas that you can easily use even without any needlework skills.

What can be made into a cute and stylish accessory?

In addition, such things carry an energy message, which is why it is advisable to start making it with good mood and, quite possibly, then your craft will become for you a real amulet or amulet for good luck.

What can such a thing be made of? Yes, almost anything, for example:

• From materials such as beads, paper, thread, polymer clay, coins, rubber bands, etc.
• You can also use old unnecessary parts from watch movements and leather straps for steampunk key chains.
• Pencil stubs, wine corks, ribbons, scraps of fabric and more are all good too.

It all depends on the materials available and your imagination.

Paper

To begin with, I would like to talk about how to make a paper keychain, because this material can be found in every home. There are many options for crafts of this kind, here is one of them:

1. Take old unnecessary magazines or newspapers, or rather their covers, several sheets of thick multi-colored paper.
2. Cut them into long strips in a triangular shape.
3. Attach a toothpick to the wide side of the strip.
4. Start wrapping the piece. Seal the end with glue.
5. Open with varnish, then put on a string, if desired, add beads.

Important! You can also make such an accessory using quilling or origami technique from paper. Very interesting idea miniature book. However, do not forget that such crafts are short-lived, as they are quickly overwritten.

Threads and rubber bands

Various key chains for a backpack can be made from ordinary threads. To do this, you will need your imagination, threads and a scheme for work.

Important! Since it is better to make a keychain from durable threads, yarn or shoe threads are better suited. Thin elastic bands or floss will also fit.

Idea 1

As an example, you can try to make a dream catcher. For this:

1. You need to take the base ring and wrap it tightly with threads.
2. Then start knitting a pattern in the center of the ring.
3. Separate segments are intertwined in beautiful patterns. With their help, you can set a specific value for the key fob.

Idea 2

But how to make crafts from floss? Alternatively, you can try to weave a keychain according to the principle of making friendship bracelets. This technique implies the interlacing of segments with each other, as well as tying knots, which as a result allows you to give the product a certain shape.

Idea 3

You can also weave a keychain from stationery rubber bands, for this you will need:

• Five colored rubber bands (purple in our case) - for the brightest flower, a few pieces for a chain;
• Ten elastic bands in two contrasting colors (we have gray and white);
• Crochet hook.

We create a keychain with our own hands:

1. Take one purple rubber band, twist it on the hook in four turns.
2. Then take two elastic bands of different, contrasting colors and pull the purple one over this pair. Make five such blanks.
3. Take one purple elastic band and drag all the blanks from the hook onto it, then tie this elastic band with a knot, stretching one end of the elastic band through the second.
4. Now you need to weave a “chain” of the required length. To do this, stretch one purple rubber band through the one that we tied in a knot. This will be one link in your chain. Next, weave the desired length for your keys or phone.

Beads and beads

Since it is probably the easiest way to make a keychain of any shape from beads and beads, this method is the most popular.

You will need:

• a set of beads;
• thin wire or fishing line;
• diagram for work.

Work sequence:

1. Cut a piece of wire and bend it in half.
2. Put a bead or bead on one end and push it to the middle. Pass the other end of the wire through it.
3. Put on the second row of beads - one more, the next one more, and so on. To make the petal interesting, use beads of other colors around the edges, starting from the third row.
4. When you reach the middle, start reducing the number of beads in the row. Thus, make the required number of petals.
5. Put black or yellow beads on the wire, on top - a larger bead. This will be the stamen.
6. Connect all the elements, twist the wire, and secure it with a larger bead at the bottom.

Polymer clay and plasticine

Also, a beautiful keychain can be molded from plasticine, but it is better to use polymer clay for these purposes, because it can be baked for strength. Since a plasticine or clay keychain can be made in any shape and color, there are no restrictions. However, please adhere to the following rules:

• To work, take a small piece of material and fashion any figure out of it. The rest of the clay should be well wrapped in polyethylene so that the clay does not dry out.
• Use a metal mount. It can be inserted into the craft and baked along with the product or attached after work, into a previously prepared hole.
• Clay can be baked in the oven or a hair dryer can be used for this purpose.
• Coat the product with varnish on top.

Important! Every keychain needs the right mount. You can find them in any of the handicraft stores. Feel free to contact the sellers for help, they will help you find exactly the mount that is most suitable for your craft.

coins

A stylish DIY keychain can be made from simple coins. To do this, you will need coins of different sizes. You need to drill holes in them and fasten them with a chain, alternating elements of different diameters.

For each holiday, we are always looking for something to please ourselves and our loved ones. And very original and comparatively an inexpensive gift there will be a handmade keychain.

What can you make a keychain with your own hands? Such a keychain can be made from materials such as: leather, polymer clay, satin ribbons, a chain with beads, buttons, metal and, of course, .

Consider a few master classes on making key rings.

How to make a keychain from satin ribbons with your own hands?

1. Gotta take two thin tapes 2 m long and fold in half.
2. We twist them as shown in the picture. In order not to get confused, let's number the tapes.

3. Raise tape 3 up.

4. We put tape 1 on top of tape 3 and draw it into the loop formed between tapes 3 and 4. Tighten it and get a square. To get a keychain of a round company, you need to tighten it tighter.
5. The view from the back should look like this.

6. We lower the tape3 (which is on top) down.

7. Tape 2 (left) is directed to the right, and then tape 4 (bottom) - up.
8. Tape 1 is threaded into the loop that tape 3 formed when lowered.

9. And tighten again. We continue to weave as well until we get such a keychain, which we tie to the ring with the remaining ribbons.

It is always not easy to find something in the bag of any girl, and if it is a small key, then it can take a lot of time to search for it. For a faster search, you need a large and beautiful keychain. Moreover, it will always emphasize your style and beauty. Let's see how you can make a beautiful keychain with your own hands.

How to make a keychain at home?

This world is developing so fast that we simply do not have time to keep track of everything. On this moment there are hundreds of thousands of different key chains, from different materials, different colors, etc. We'll show you how to make the most simple options, from simple and cheap materials.

How to make a leather keychain?

Prepare materials and tools:

Key ring;
- a piece of leather;
- batting;
- scissors;
- pen;
- thread and needle;
- printed template.

1. First you need to decide what shape we want to make a keychain. Then we print the template on a piece of paper. As you can see, you can do different forms- heart, triangle, circle.

2. Attach the skin to the template and draw the cutout area. Leather can be taken both natural and artificial. We cut out two parts of the keychain, back and front, as well as a small strip (see photo).

3. We put the two blanks together and start stitching. Insert the needle with inside future keychain to hide the thread knot. We begin to sew with small stitches. On one of the faces, do not forget to put a strip for the ring. Fold it in half and tuck it into the mold so that it peeks out a little and sew. Do not sew all the edges at once, because you still need to put the filler in the middle.

4. To add volume, add a little batting to the middle. And after that we sew up completely.

5. We cut off the excess thread, insert the key ring - and our keychain is ready!

How to make a beautiful fabric keychain?

To make such a wonderful and very bright keychain, we need:

Beautiful fabric;
- peltex;
- iron;
- curly scissors;
- thick tape.

Peltex is a material that adheres to the fabric under the influence of hot (iron).

1. Let's prepare the fabric of our choice. It should be well ironed from the inside. Peltex ( white fabric(pictured) no ironing required.

2. Using a round template, transfer the shape to the fabric.

3. We place the decor element, the letter "C" in the middle of the keychain shape. We stick in any way possible.

4. Now, we need to attach the peltex. We turn our fabric over to the other side, attach the peltex and iron it with a hot iron. Apply the iron for 15-20 seconds so that the fabric sticks well.

5. Cut out our circle shape. Prepared part and back, you can use another fabric.

6. Sew the top and bottom.

For better reliability, we stitched almost the entire circle. Do not flash everything, because you still need to insert a ribbon for the ring.

7 . Trim the edges with curly scissors.

8 . Cut off a piece of thick tape, bend it twice and insert it into the keychain. We sew again.

You can insert a key ring.

We cut off the extra threads and our keychain is ready!

How to make a lego keychain

You can also make a beautiful Lego keychain. All you need is a few Lego bricks and key rings. In order to make them convenient to hang, you can make a beautiful mount on the wall.

A lot about a person can be told by such a thing in his everyday life as a keychain. A small flight of fantasy, peacefully dangling on the keys or the phone, one way or another corresponds to the inner qualities and desires of its owner. For people who have a negative attitude towards a bunch of randomly dangling bells or glitters, ideal solution becomes a keychain book. This is a real miniature book, created in a short time, and it can serve for many years. To create it, I needed the following tools:

sheets of A4 paper;
a small piece of cardboard;
pencil;
ruler;
scissors;
stationery knife;
PVA glue;
needle and thread;
metal chain;
an awl or similar tool.
The first step is to prepare the paper for the future filling of the book, namely the pages. To do this, with the help of a knife and scissors, we grind sheets of white paper into rectangles measuring 3 by 6 centimeters.

By the way, the paper does not have to be white. It all depends on the page color you choose. We fold the resulting leaves in half so that we get double pages 3 by 3 centimeters. We group them into small books of three.

Now on the fold of each pack we make holes at an equal distance from each other.

I did this procedure in two stages so that the pages would not move.

If you know of any other binding option, you can use it. The end result is something like this.

The final step is to thoroughly coat the resulting spine with PVA glue and let it dry under pressure.

While our future book dries, you can do its cover. For its manufacture, I used ordinary cardboard and a small piece of paper with a print. To begin with, we cut out two pieces of cardboard that correspond to the size of the pages, and one spine that fits the parameters.

With the help of PVA glue them on the chosen for the cover beautiful paper leaving gaps.

Then we make cuts on paper like this.

Now, fold the remaining edges and glue.

In that part of the spine that will fall on the top of the book, we make a small hole with any sharp object (I used a tool from a sewing machine to cut the threads) and fasten the chain.

The most crucial moment is coming. Putting together the cover and the book. To do this, glue the spine of the book to the space allotted for it on the cover. For better fastening, we also glue the outer pages to the cover.

This also solves the problem of open seams in the paper intended for the cover. This is the beauty I got.

Most people like to beautifully decorate their keys, phone or backpack with an original and unique keychain. Nowadays, finding such an important craft is not difficult. Many stores offer a wide range of key rings of all shapes and sizes. But none of them can compare with a DIY accessory. You can make such a craft from almost any material at hand, and for this you will not need much time and effort.

Materials for key rings

A keychain is not just a beautiful accessory. It allows you to express your individuality and Creative skills. In addition, key rings carry an energy message, so you need to make it with good thoughts and mood. Only in this case it will energize you for many years.

Before you understand how to make key chains with your own hands, you need to choose the right material for the product. They can be made with:

In process beautiful accessory you can resort to the help of your imagination and make a keychain from a wine cork, watch parts, a rabbit's foot, shreds of fabric, straps, pencils, ribbons, pompons.

Easy manufacturing methods

If you are a beginner, then you can make a beautiful keychain using a few simple ways. You won't need a lot of time and energy to implement them., and the result will please not only you, but also your loved ones.

What can be made from paper

This option is the most affordable and simple. From paper, you can come up with a wide variety of crafts that will be a great addition to your style. The process does not take much time and consists of the following steps explaining how to make a paper keychain:

A paper keychain can also be made using the quilling or origami technique.

The big disadvantage of such a product is its fragility. The paper is quickly overwritten, and the keychain loses its attractive appearance.

Keychain made of threads and rubber bands

Crafts made from simple threads. Despite their simplicity and cheapness, they look great and give individuality. Since it will be easy even for a beginner to make a keychain from threads, the whole complexity of the process comes down to the correct selection of material. It is best to use yarn or thread for shoes. They are more durable, and crafts made from them will last you longer. A good option would be to use elastic bands or floss.

Procedure:

1. We take dense threads and a ring that will serve as the basis for the product.
2. We wrap the ring with yarn.
3. In the middle we knit the pattern you like. With it, you can give the accessory a magical or protective meaning.

Making a keychain from rubber bands is not much different from threads. Using a hook and simple rubber bands, you can weave a keychain in the form of a bracelet or a heart. Such an accessory can not only be worn by oneself, but also presented to a loved one. To do this, weave several segments and tie knots. This allows you to give the craft desired shape and sizes.

Polymer clay or plasticine

Polymer clay is the perfect material for making key rings. In the process of work, it can be baked and thereby give additional strength. Clay products can be of any shape and color.

Rules for working with polymer clay:

Complicated ways

Apart from simple ways making a keychain for beginners, there are more complex ones designed for professionals. It will take a lot of time to implement them, but the result will make you proud of yourself.

Bright beaded pendant

Most needlework lovers adore beadwork. Using this technique, you can create key rings of any shape. For work, you only need beads and fishing line.

Flower shaped beadwork:

coin accessory

To create a keychain, we use several coins. different size. We drill holes in them and fasten with a chain. A product made from coins of different countries will look very nice. Such a keychain will not only complement your image, but also tell about your travels.

You can also use one coin to make an accessory. The most popular option is its curly sawing into two halves. One of them will be worn by you, and the second by a person close to you.

It is believed that any coin products bring good luck in personal life and contribute to success in financial affairs.

Felt keychain

You can decorate your backpack, phone, keys, bag with an original craft made of felt. For a keychain, figurines of various animals and plants are suitable. For example, take the process of making a small raccoon.

To sew felt keychains with your own hands, you will need to follow these steps:

In the same way, you can make a rabbit, bear, fish or any other animal.

Wooden crafts

DIY wood key chains are very popular. They can be done in four ways:

1. With the help of laser and milling machines.
2. Surface painting.
3. Burnout.
4. Sculpture cutting.

All wooden products look very beautiful and original. To create them, you need certain skills, and it will be difficult for a beginner to make something really beautiful.

It does not matter which option you choose, but it is very important to put your soul into the made keychain. This will give it personality and reveal all your skills.

Attention, only TODAY!