Proper washing of a waterproof mattress cover. How to wash a waterproof mattress pad Is it possible to wash a sheep wool mattress pad

Mattress covers are among such items bedding, the care of which is often not given due attention and the need for regular washing is forgotten. But such products perform the function of protecting the mattress and its filler from moisture, dirt, microorganisms and insects, and maintain favorable conditions for sleep. Mattress covers often come into contact with the human body and must comply with hygienic standards of cleanliness and freshness.

In the production of modern models of mattress toppers, different kinds natural and synthetic materials. The constant use of covers leads to the formation of various kinds of pollution on their surface. As a result, the mattress pad loses its protective and hygienic qualities, which negatively affects the characteristics of the mattress and human health. Covers should be cleaned regularly. At the same time, you need to know how to properly wash mattress covers (especially if they are waterproof) so that they do not lose their properties and do not wear out. ahead of time operation.

General rules for washing mattress covers

Before washing the mattress cover, you should study the product label or annotation from the manufacturer of this model. They should contain information on the composition of materials and recommendations for cleaning the product. For example, can a mattress pad be washed in washing machine What should be the washing parameters.

In the manufacture of mattress covers, microfiber, cotton fabrics, and bamboo fibers are often used. For each of these materials, certain washing conditions are suitable:

1. Microfiber. The material is available for processing in a washing machine at temperatures up to +60°. The material is able to withstand temperatures of + 95 °. You can also use detergents without the risk of damaging the microfiber structure.
2. Cotton. cotton fabric can be washed by machine or by hand. The optimum water temperature is up to + 40 °, otherwise the material shrinks.
3. Bamboo fibre. For such material, you should choose a delicate machine mode without spinning and the minimum washing parameters.

Drying of covers should take place in good ventilation, with access to fresh air. In this case, direct sunlight should be avoided. Mattress toppers should be dried flat, preferably on horizontal surfaces.

Features of washing waterproof mattress covers

In the manufacture of high-quality waterproof mattress covers, membrane fabric is used

Waterproof mattress covers are usually made of waterproof fabric with a membrane structure. Over time, the pores of the material become clogged and the membrane loses its properties. Waterproof models of mattress toppers are often used to cover the beds of children and patients. Such products are subject to special hygiene requirements, they should be cleaned regularly. To do this, you need to know how to wash waterproof mattress covers correctly.

The membrane can be washed by machine and by hand. In doing so, the following rules must be observed:

• washing temperature should not be higher than + 40 °;
• machine wash should be done in a delicate, gentle mode without spinning and drying;
• powder detergents, as well as bleaches, conditioners, chemical cleaners with aggressive components can damage the structure of the material, it is not recommended to use them;
• for washing the membrane, only products specially designed for this should be used;
• dirt stains on the surface of the material can be removed using baby or laundry soap.

After improper drying, a low-quality mattress cover may lose its size.

Mattress covers with waterproof properties should be wrung out by hand, without heavy loads and twisting. It is necessary to dry the product away from batteries and various devices that generate heat. The place of drying should be well ventilated, without access to ultraviolet rays. After each washing cycle and complete drying, the mattress pad should be treated with special impregnations that maintain and restore the water resistance of the material.

Cleaning cases made of other materials

When sewing mattress covers, various fabrics can be used.

In the production of mattress covers, a wide variety of materials and fabrics are used. By determining their composition, you can choose effective method cleaning and optimal washing conditions that preserve their structure and characteristics.

To understand how to wash a mattress cover, let's highlight the most common types of materials that are used in their manufacture:

1. Sheep and camel wool. Woolen products are prone to dust accumulation, the fabric quickly absorbs various liquid substances. Fresh stains and traces of dirt are removed with a sponge and wool stain remover diluted with water at a temperature of about +30°. This temperature value should be observed when hand or machine washing. For processing in the washing machine, you must select the mode for woolen items. It is not recommended to unscrew the mattress cover, it is necessary to slightly squeeze it on both sides. The detergents used must contain lanolin.
2. Feather and down materials. Such products are available for washing in the machine, provided that the centrifuge is designed for things of large volume and weight. To process the material, a mode with gentle parameters and spinning of medium or low intensity is required. Recommended liquid detergents, bleaches and conditioners should not be used.
3. Covers filled with coconut, latex or polyurethane. Washing of such materials should be avoided, as their properties are lost under the influence of water, temperature and mechanical stress. The filler should be removed from the mattress cover, shake out the dust and dry well. You can only wash the cover.
4. Holofiber. This synthetic hollow material is able to withstand high temperatures during washing, exposure to various washing and cleaning agents with aggressive substances, significant loads during machine washing and spinning. Almost any processing parameters are suitable for it, therefore, when choosing washing conditions, one must focus on the least durable material connected to the holofiber.
5. Knitted fabric. Such material can stretch. To wash it, use a gentle, delicate mode with neutral detergent compositions in the form of a gel. Dry such products should be in a horizontal position.
6. Jacquard satin. In order not to damage the mattress pad made of such fabric, the centrifuge of the machine should be filled only half of its volume. Processing parameters should be gentle, with water at +30°, without wringing, drying and the use of bleaches, conditioners, stain removers. You can iron such a fabric only from the wrong side at the minimum temperature of the iron.

It should be remembered that for washing mattress covers from combined materials, it is necessary to choose the parameters and modes that are optimal for the most vulnerable fabrics. It is recommended to wash mattress covers 2-4 times a year, depending on the degree of soiling. At the same time, they should be vacuumed, shaken and aired monthly.

The mattress topper is useful thing worth having in your home. Often it comes with a mattress, but if necessary, it can be purchased at any hardware store. After all, it protects the surface of the mattress from various contaminants and stains.

Many are wondering can the mattress cover be washed?

The answer is simple: it is possible and even necessary.

It should be washed at least once every two to three months. But first you need to figure out how to wash the mattress pad correctly.

How to wash a mattress pad? In order to find out how to wash this product, you need to understand what fabric it is made of.

There are the following types of mattress covers:

• cotton;
• synthetically;
• polyurethane;
• woolen.

Each mattress pad has a label with information about the required washing mode, dyeing ability and ironing temperature.

If the mattress cover is made of polyurethane, then the washing temperature can reach 90 degrees. It is in such conditions that microorganisms harmful to humans die.

You need to understand that the cover from improper washing can sit down and become unusable, especially if it is on an elastic band. Such a product will be almost impossible to pull on the mattress. Therefore, you must carefully read the information on the label before putting the mattress pad in the washing machine.

Washing the cover is not difficult, but there are always certain tricks.

Synthetic or cotton types of products can be washed more often than others.

They tolerate this procedure well, without changing the shape and quality of the surface.

The cover from the baby mattress should be washed with a special baby powder so as not to cause an allergic reaction in the child.

The question arises, how to wash a mattress cover if it is made of wool, and is it generally possible to wash a cover made of such a fiber?

Since wool requires special care, it is better to take such models of covers to dry cleaning. And in the absence of severe contamination, the dry cleaning method will be used.

It is the safest for this type of fabric.

If you decide to wash the cover, then it is better to do it on the “wool” or “delicate wash” mode. In this case, the temperature should not exceed 30 degrees.

To clean the dirt from such a product will help special means containing lanolin. It will protect the woolen case from mechanical damage during washing, and will also give them elasticity and softness.

Having dealt with the question of how to wash the cover, it follows the question - how to dry it properly?

If there is a filler in the mattress cover, then it must be spread evenly during the drying period, otherwise it will gather into one big lump and the product will become unusable.

The woolen case should not be wringed or twisted during drying. Excess moisture should be disposed of with longitudinal movements. Drying of the product is carried out only in a horizontal position.

Mattress toppers without filling can be gently ironed.

And models with fillers are strictly prohibited from ironing. It may melt or shrink in size.

Hello!

When the question arose of purchasing a new mattress, in the salon I was offered to take a cover for it. I remember what kind of mattress fabric comes to without a cover - scuffs, stains and stains of all possible types - I decided not to save on this accessory and agree.

Cover from the manufacturer Askona "Protect-a-bed Terry" 140*200 cm cost 2887 rubles. Suitable for mattress height up to 40 cm.

Sold in a plastic case with a zipper, a cardboard tab helps to keep the shape.

Main characteristics:

• Waterproof case, good breathability
• Protection against dust mites and allergies
• Maintains a comfortable body temperature
• Cotton terry surface

Compound:

Manufacturer information:

Appearance:

The fabric is white, the side parts are made of a stretchy translucent fabric, framed with an elastic band around the entire perimeter.

Central part: with front side terry thin coating with fine pile

on the inside, the fabric resembles a thin oilcloth

The cover sits tightly on the mattress. An unexpected plus for me was that, due to the terry coating, the bed linen absolutely does not slip on the surface of the mattress (on an uncoated mattress, the sheet usually rolled down in the morning)

It is surprisingly easy to put on, it can easily be done by one person.

This is what the reverse side looks like

There is no discomfort, no feeling of heat - from which we can conclude that the surface is really well breathable.

Stain protection:

I had to wash the cover two months after purchase. I apologize for the intimate details, but this is an important point for the review: the fact is that during menstruation it happened that a little blood leaked onto the sheet, and as a result, the cover was also soiled. When I took the cover off the mattress, to my relief, there was not a single stain on the mattress itself!

I washed the stain with laundry soap and washed it in the machine at 40 degrees. The cover is white again and looks like new. So the water resistance is also tested in practice.

Many thanks to everyone who came, I hope my review was useful!

__________________________________________________________________

All mattress covers are hand or machine washable. Before starting, it is important to carefully study the recommendations that the manufacturer indicates in graphical form on a special tag. The main requirements are reduced to a complete rejection of spinning and the use of the lowest possible temperature, not exceeding 40 degrees. It is possible to use powders that are used for everyday things. After washing, the product is given the most correct appearance and dried horizontally.

Before washing a mattress cover made of any fabric, carefully study the washing requirements for this product, proposed by the manufacturer.

What types of mattress covers are machine washable

Mattress covers made of any material are suitable for washing, even waterproof or waterproof fabrics. The main types of mattress covers:

List of the most popular manufacturers:

• Andersen
• Askona
• Ellipsebed
• Geneva
• Kondor
• Perrino
• Professor
• Protect-A-Bed
• Sleep&Fly
• Mattress
• Protect
• bed & bed

Before starting, you must carefully study the manufacturer's recommendations, which he. For each product, you need to choose a washing mode and temperature at which washing powder will remove all impurities and at the same time will not cause any harm to the color and structure of the fabric.

What temperature to choose

When washing the cover, the temperature should be the same throughout the procedure.

When choosing a program for delicate items, the lowest possible temperature is automatically set - from 30 to 40 degrees. Otherwise, this temperature is set manually. It should be constant throughout the wash.

Spin

If there is no program selection, then it is necessary to turn off the spin completely and set the minimum washing time. Excessive spinning speed can irreversibly deform the cover from the Ascona orthopedic mattress and other types of covers.

How to dry a mattress cover

With the complete absence of spinning in manual and automatic washing, the mattress cover remains completely saturated with moisture. It must be properly dried so that it does not have time to ban and is not deformed. To do this, give it the most correct shape and place it completely on a horizontal surface. For good drying, ensure good air circulation so that evaporated moisture does not linger in the room.

The best measures are preventive. If you do not allow the cover to become dirty, then you will not often have to wash it. To do this, mattress covers are usually covered from above. bed linen, which serves as a barrier to major contaminants, including dust. Get rid of the habit of eating or drinking in bed to keep crumbs and liquid from getting on your bed sheets.

The manufacturer of each product provides recommendations for the care of their product. It is usually sufficient to ventilate a mattress pad from Ascona and other manufacturers several times a year, periodically vacuum it and remove minor dirt.

Below is a video that shows washing a mattress cover in a washing machine.

To keep the mattress clean, protect it from getting wet, stains and unpleasant odors, special removable mattress covers are used. They need to be dry cleaned or laundered regularly.

Since a modern mattress pad is usually not just a fabric cover, but a multilayer product with certain functional properties, questions arise whether it is possible to wash a mattress pad, and how to do it correctly at home.

Let's consider how to wash a mattress cover, taking into account the materials used to make the cover itself, the filler, and the moisture-proof membrane.

General rules

Usually the care instructions for the product are indicated on the label, so keep it with the mattress cover. If the label is lost, you can try to find the relevant information on the Internet.

For example, for each Ikea mattress topper offered for sale, the store website presents detailed instructions for care - washing and drying mode, the possibility of bleaching and dry cleaning.

In the absence of information, you will have to focus on the materials of manufacture and wash in the most gentle conditions in order to avoid deformation of the product and loss of performance properties of the filler.

For the manufacture of the outer cover is usually used:

• cotton fabric (prone to shrinkage, therefore it is allowed to wash at 40 ° C, by hand or in a typewriter, you can bleach and iron the material);
• bamboo fiber (water temperature up to 40 ° C, drying in a machine, ironing, bleaching is prohibited);
• microfiber (normal wash - at temperatures up to 60 ° C, digestion at 95 ° C).

If the design of the mattress cover includes a moisture-proof membrane, you cannot use washing powder, as its crystals can clog the smallest pores. In other cases, the powder is used along with liquid means for machine wash.

Waterproof models

The water-repellent cover protects a mattress from all types of pollution, at the same time remains vapor-permeable due to use of a special membrane. The membrane material needs to be cleaned regularly, as clogging of the pores leads to loss of functionality.

A waterproof mattress pad requires special care. It is forbidden:

• crystalline SMS;
• wash at temperatures above 40°C;
• bleach with chlorine-containing products;
• squeeze by hand or in a typewriter;
• dry near radiators, fan heaters, under the sun;
• iron (the membrane is destroyed under the influence of elevated temperatures);
• use conditioners, conditioners, etc. when washing;
• be dry cleaned.

Such a cover is washed in a typewriter, setting a delicate mode without spinning and a temperature of 30-40 ° C. Liquid soap, gel, shampoo are used as SMS. Stains are pre-washed manually with soap. The product washed in the typewriter is hung over the bath so that the water is glass.

Dry in a straightened form, after drying, the surface of the waterproof mattress cover is treated with a water-repellent agent to restore the performance of the product.

With down filling

If the mattress cover contains natural down and feather filler, it can be washed in a washing machine, provided that it is designed to load at least 7 kg of dry laundry. Do not use bleach. A delicate wash program is set with a spin at medium speed, liquid SMS is poured into the tray, the air conditioner cannot be used.

Woolen mattress covers

If the surface of the lambswool mattress topper is slightly soiled, it can be cleaned with a sponge dipped in warm water with the addition of a detergent for washing woolen fabrics. Wash the product in the machine using the “wool” mode with water heating up to 30 ° C and spinning at medium speeds.

Wool washing gel, which includes lanolin, is poured into the tray. Dry woolen covers, spreading out on the floor over a terry sheet. To remove complex contaminants, they turn to dry cleaning.

With synthetic filling

Artificial fiber is often used as a filler. Holofiber, polyester fiber and similar materials can withstand temperatures up to high temperatures, are not afraid of spinning at high speeds, exposure to aggressive substances. The washing mode is selected based on the characteristics of the material from which the outer cover is made and an additional layer of filler, if any.

Filled with coconut and other natural materials

The question often arises of how to wash a mattress cover if the inner layer in it is made of natural material. Manufacturers offer models with coconut (coir), with natural latex, with buckwheat (husk), with algae. Such products cannot be washed, only a fabric cover is subjected to cleaning and washing.

Mattress covers Askona

A feature of Ascona mattress toppers is the use of knitted cotton fabric for the manufacture of an outer cover. If the composition of the filler allows washing, it is important to follow the technology that will not allow the knitwear to stretch. Choose a gentle mode with water heating up to 40 ° C, use soft SMS, dry the product in a horizontal position, gently straightening it.

Pay attention to the waterproof cover Protect a bed from Askona. It differs from standard membrane models in temperature stability. Washable at 50°C, tumble dry on medium heat. The product can withstand up to 200 washing cycles.

Mattress covers Ormatek

In order not to damage the cover, it is important to know at what temperature it is allowed to wash jacquard satin - it is this material that is often used in the manufacture of Ormatek mattress covers. According to the rules for caring for such a cover:

• it can be machine washed only if the product occupies no more than half of the drum;
• it is forbidden to use bleaching agents;
• set the delicate mode, the spin option for machine wash should be turned off;
• the maximum allowable water temperature is 30°C;
• cannot be dried in the machine;
• iron the product from the front.

Conclusion

The cover on the mattress must be regularly cleaned with a vacuum cleaner or knocked out, ventilated. Wash it as it gets dirty, on average once every 4-6 months. It is recommended to dry the product in a straightened form away from direct sunlight, preferably in the fresh air.