Openwork pullover with braids. Openwork pullover with braids spokes. Openwork pattern with "braids" in

Dimensions: 38 — 42

Materials:

• 500 g yellow Journey yarn (44% cotton, 36% polyacrylic, 20% polyamide, 90 m / 50 g);
• knitting needles 6 mm.

Garter stitch: persons. and out. R. -persons. P.

Facial surface: persons. R. - persons. p., out. R. - out. P.
openwork pattern with braids: the number of loops is a multiple of 24 + 11 + 2 chrome. Knit according to the scheme, which shows only persons. r., in out. R. all loops and nakida knit out. Start with 1 chrome. and loops before rapport, repeat rapport, end with loops after rapport and 1 chrome. Repeat from the 1st to the 16th p.

Knitting density: 16 p. and 26.5 p. = 10 x 10 cm.

Openwork pullover with braids

Back: dial 85 p. and tie for the bar 1.5 cm = 3 p. garter stitch and 2 p. persons. satin stitch, while starting with 1 out. R. Then knit with an openwork pattern with braids. After 36 cm = 96 p. from the strap close for armholes on both sides 5 p. = 75 p.
Through 53.5 cm = 142 p. from the strap, tie another 1.5 cm on all loops = 4 p. garter stitch and close all loops faces. The middle 49 sts form the neckline, the outer 13 sts on each side form the shoulders.

Before: knit the same way.
Sleeves: dial 61 p. and tie for the bar 1.5 cm = 3 p. garter stitch and 2 p. persons. satin stitch. Then knit with an openwork pattern with braids. After 33 cm = 88 p. close all loops from the strap.

Assembly: perform shoulder seams. Stitch sleeves, sew side seams and seams of sleeves.

2015, . All rights reserved.
Full or partial use of the material FORBIDDEN!
Only a photo of a model with an active link to the article is allowed.

Pullover sizes: 36/38 (40/42) 44/46

You will need: 700 (750) g ​​of Toscano from GGH in mint color number 21 (60% viscose, 20% hemp, 20% polyamide, 110 m/50 g) from GGH;

straight needles 4 and 4.5 mm and circular needles 4 mm.

Garter stitch:

in the ranks: knit faces. and out. rows of facial loops.

in a circle. rows: alternately 1 circle. r - out. p., 1 circle. row - persons. P.

Openwork pattern: even number of loops

1st p.: * 2 sts together, 1 yarn over, repeat from *.

2nd and 4th p.: Loops and nakida knit out.

3rd p.: * nakid, 1 broach (= remove 1 p. as persons., 1 person. p. and stretch it through the removed p.), repeat from *.

Pullover sizes: 36-38 and 42-44.

Pullover length 66 cm.

Data for size 42-44 are shown in brackets.

If only one value is specified, it applies to all dimensions.

You will need: 400 (450) g ​​of green LINIE 16 STARWOOL LIGHT yarn number 39, straight needles and circular needles number 3-3.5, one auxiliary. spoke.

Rubber: alternately 2 persons. p., 2 out. P.

Start with 1 out. R.: chrome. p., * 1 out. p., 2 persons. p., 1 out. p., repeat from *, chrome. P.

Pullover size: 34-36 (38-40) 42-44.

Sizes: 38/40 (44/46)

You will need: 450 (500) g Cotton Merino coral yarn (52% merino wool, 48% cotton, 100 m / 50 g); knitting needles No. 5.5: hook No. 4.5.

Facial surface: faces. R. - persons. p., out. R. - out. P.

Openwork pattern with braids: the number of loops is a multiple of 12 + 1 + 2 chrome. Knit according to the scheme, which shows only the front p., in the purl p. knit all loops out., while from both yarns of the front p. knit only 1 out., lower the 2nd yarn. For size 38/40, start with 1 chrome, repeat rapport, end with a loop after rapport and 1 chrome. Incomplete braids on both sides knit like stripes from faces. smooth. For size 44/46, start with 1 chrome. and loops before rapport, repeat rapport, end with loops after rapport and 1 chrome. For all sizes please follow the order. so that the number of yarns corresponds to the number of loops knitted together or together by broach and vice versa. Repeat 1 time from the 1st to the 18th p., 2 times from the 3rd to the 18th p., 1 time from the 19th to the 38th p. and then repeat from the 29th to the 38th p.

You will need: yarn (50% cotton. 50% wool: 100 m / 50 g) - 600 g light green; knitting needles No. 4 and 4.5; circular needles number 4.

Knitting patterns women's pullover knitting needles

Pattern 1:(needle number 4) elastic band = rows in the forward and reverse direction (odd number of loops). Each row start and end with 1 edge. Facial rows: alternately 1 facial crossed, 1 purl, finish 1 facial crossed; purl rows: alternately 1 purl crossed, 1 front, finish 1 front crossed. Circular rows (even number of loops) = alternately 1 purl crossed, 1 purl.

Pattern 2:(needles No. 4.5) a pattern of "braids" (the number of loops is a multiple of 56 + 1 + 2 edge) = knit according to the scheme. Only the front rows are given on it. In the purl rows, knit the loops according to the pattern, knit the front crossed ones with the purl crossed ones, knit the crochets with the purl ones. Start with 1 edge and loops from arrow A, repeat 1 time, finish with loops to arrow B and 1 edge. Attention! At the beginning and end of the row, do not cross in the 29th and 33rd rows of the scheme, but simply knit the loops with the front ones. Constantly repeat the 1-42nd rows. When making increases and decreases, make sure that the number of crochets and loops knitted together is the same.

Knitting density: 24 p. x 25 p. = 10 x 10 cm.

Description of knitting an openwork women's pullover with knitting needles

Back: dial 107 loops on the knitting needles and knit 3 cm for the strap with pattern 1, while in the last purl row, evenly distributing, add 8 p. = 115 p. Continue working with pattern 2. After 45 cm = 112 rows from the strap, close for shoulder bevel on both sides 1 x 3 p., then in each 2nd row 5 x 3 p. and 3 x 4 p. At the same time, after 50.5 cm = 126 rows from the bar, close the middle 41 p. . For rounding along the inner edge, close in the next 2nd row 1 x 3 p. After 52 cm = 130 rows from the plank, close the remaining 4 p. Shoulders.

Before: knit like a back, but for a deeper neck, already after 44 cm = 110 rows from the bar, close the middle 13 p. And on the inner edge, close in each 2nd row 2 x 3 p., 4 x 2 p. and 3 x 1 P.

Sleeves: dial 51 loops on the knitting needles for each sleeve and tie 3 cm with pattern 1 for the strap, while in the last purl row, evenly distributing, add 8 p. = 59 p. each 6th row from the bar 14 x 1 p. according to the pattern = 87 p. After 37.5 cm = 94 rows from the bar, close the sleeves for a low sleeve on both sides 1 x 6 p., then in each 2nd row 5 x 6 p. Close the remaining 15 p. after 42.5 cm = 106 rows from the bar.

Assembly: perform shoulder seams. For the plank, cast on circular needles along the edge of the neckline 92 loops and knit 3 cm with pattern 1. Then cast off all loops according to the pattern. Sew on the sleeves, complete the side seams and the seams of the sleeves.

S (M) L (XL)

You will need

Yarn (50% bamboo, 25% cotton, 25% acrylic; 50 g / 123 m) - 16 (18) 19 (20) skeins of coral; knitting needles No. 4.5 and No. 5; circular knitting needles No. 4.5, 40 cm long.

Attention!

The product is knitted in 2 threads!

Product width according to chest circumference

92 (98) 104 (110) cm

Length of the product

60 (61) 62 (63) cm

Patterns and schemes

Rubber

Alternately 2 persons. and 2 out.

Edge hinges

Edge hinges knit in all rows.

Openwork pattern with "braids"

Knit according to the given pattern. Edge loops are not shown in the diagram and are not included in the pattern. In height, repeat these 16 p. until the end of the work.

Knitting density

15 p. facial surface knitted in 2 threads with knitting needles No. 5 = 10 cm.

Completing of the work

Back

On knitting needles No. 4.5, dial 90 (94) 98 (106) p. And knit with an elastic band (1st row = out. row), starting with 2 out.

Knit with an elastic band according to the pattern of 5 cm, in the last row of the elastic band, adjust the number of loops so that the knitting needles have 91 (97) 103 (109) p.

Switch to needles No. 5 and knit with a pattern according to the scheme.

When the length of the part is 41 cm, close on both sides for armholes in every 2nd p. 3, 2, 1, 1, 1 (3, 2, 2, 1, 1) 3, 2, 2, 1, 1 (3, 2, 2, 1, 1, 1) sts = on needles 75 ( 79) 85 (89) p.

When the height of the armhole is 18 (19) 20 (21) cm, leave the average 35 (37) 37 (39) p. for the neck and finish both sides separately.

At the same time, for the shoulder bevel, close from the outer edge in each row 5, 5, 5, 5 (5, 5, 5, 6) 6, 6, 6, 6 (6, 6, 6, 7) loops.

Before

Knit like a back. When the last 10 cm remain until the end of the part (check on the back), temporarily leave the middle 15 (17) 17 (19) sts for the neckline and finish both sides separately.

To round the neck, close from the inner edge in every 2nd p. 3, 2, 2, 1, 1, 1 p.

Close the shoulder loops at the same height as on the back.

Sleeves

On needles No. 5, dial 42 (42) 46 (46) p. And knit 4 cm with an elastic band, as described for the back.

Go to needles No. 5 and knit with a pattern (distribute the pattern from the middle), while in the 1st row
add loops = on the needles 43 (45) 47 (49) p.

When the length of the part is 12 cm, add 1 st on both sides, then increase every 4 (4) 3 (3) cm - only 8 (9) 10 (11) times = 59 (63) 67 (71) n. Added loops to include in the pattern.

When the length of the part is 47 (46) 45 (44) cm, close the sleeves on both sides in each 2nd p. 3, 2, 2 p., then 6 (8) 8 (8) times 1 p., 2 (2) 3 (4) times 2 p. and 2 times 3 p.

The remaining 13 p. Close in one row.

Knit the second sleeve in the same way.

Assembly

Run shoulder seams.

On the edge of the neck, cast on circular needles No. 4.5 about 92 (96) 96 (100) p. (including temporarily left loops, subtract about 4 p. in these areas). Knit 3-4 cm with an elastic band. Then close the loops.

Sew the seams of the sleeves. Sew on the sleeves.

Photo: Burda. Creation 1/2015

This summer pullover knitted, with a braid pattern. And the secret of its openwork is in the purl loops lowered in the last row (between the braids). The pullover is knitted according to a simple straight pattern, with the addition of loops to form sleeves (see the diagram and pullover pattern.

In the original of this model, Duna Brino Ouro yarn (100% mercid cotton) and knitting needles No. 4 were used.

Knitting density: 24 loops x 30 rows = 10 x 10 cm.

Pattern Description: pattern report 12 loops + 2 loops for the symmetry of the pattern: * 2 purl, 10 facial, * 2 purl. In the future, knit braids from 10 facial loops. Do the first weave of braids in the 9th row (remove 5 loops on an additional knitting needle and leave before work, knit 5 knit, and after 5 knit with an additional knitting needle), and all subsequent weaves, every 10 rows. The diagram shows only the front rows, in the back rows, knit according to the pattern.

Operating procedure

Back

Type 98 loops on the needles and knit with a braid pattern according to the scheme. Having knitted 40 cm from the typesetting edge, add 36 loops on both sides of the fabric to form sleeves, including them in the pattern. In total, you get 170 loops = 14 braids. Knit evenly on all loops for another 18 cm.
In the last row of the canvas, close the loops as follows: the first 2 purl loops and 10 loops of the braid - close in the usual way; Lower the next 2 purl loops, close the loops of the braid, lower the 2 purl loops, so continue to the last 2 purl loops; close the last 2 purl loops.
Before

Knit in the same way as the back.

Assembling a summer pullover

Sew shoulder seams 28 cm on each side. Sew the sides of the pullover and the seams of the sleeves.

Openwork pullover with braids is ready!

knitting pullover, summer pullover, openwork pullover, pullover with braids