On Osinka's website I found the topic "Handbags from Murochka" by Svetlana Tregub, the author of handbags made of satin ribbons. I collected all sorts of information, the nuances of how to knit them .. I'll sort them later.

Ketrin, it is, in some places I tie a caterpillar cord with a crustacean step.
2 options for creating handles for bags
Option 1 thin handles - dial a certain number (equal to the length of the intended handles 3 cm per bend) of air loops, turn the chain over with the wrong side towards you and knit the loop between the front and back half loops of the chain with a connecting column.

Option 2 - dial in the size you need, knit 1 row with a column or double crochet, turn the wrong side towards you and knit with a column or st / sn or Pst / sn for the inner half loops (extreme half loops of the chain and knitted column.)

I hope it will be useful to someone.
The sequence is this - first you knit a circle, then you lay a crossbar along the contour and tie it with a crustacean step. You collect the loops of the sidewalls from the inside,
passing under the crustacean step and knit half of the sidewall (I knit 4-5 rows of double crochets). Then two connected parts are the same parts (you tie or sew in front and half of the sidewall and back with half of the sidewall).

I knit either with a 12 mm ribbon or in two 6 mm ribbons.
About handles - I string beads on a piano string.

Let's try it step by step... I call this shape "bag". All knitting - double crochets.
1. We knit a semicircle (the number of rows is arbitrary, depending on what size you want to get.
2. From the lower (straight) part of the semicircle, we collect loops and knit 5-10 (again, it all depends on the desired shape) rows exactly.
3. We knit 1 row along the contour of the obtained form, lay the crossbar along it and tie it with a crustacean step.
4. How to knit sidewalls and finish a handbag can be read in the 4th master class on my website, the principle is the same. Here only a free-form valve is added. Well, handles are also optional - ready-made, knitted, from chains, etc.
Well, that's about it.
If you want to knit a handbag of just such a shape, then on this http://www.murochka.com/mysite/colection.php?id=389 quite clear photo you can count everything.

1. About magnetic buttons. How to fix them so that they are not visible on the front side?
2. When tying with a crustacean step, my tape is all twisted and looks uneven, apparently it needs to be directed somehow, tell me, please.

Magnetic buttons are best hidden under decor. And let the ribbons twist themselves, I personally like that it turns out, as it were, a melange from the glossy and matte sides. And all the bumps go away after steaming.

I would advise you to burn all the ponytails first (so that the tape does not split), then hide, and then also secure with a matching thread or better with a monofilament, because. the tape has a tendency to slip and the tails will eventually begin to protrude again ..

Various beads and pebbles that you liked, the main thing is that they are of decent quality. And then I collect suitable handles, stringing them on a strong piano string.

By some signs, distinguish high-quality tapes from low-quality ones.

The end of the tape in each reel is usually covered with a small piece of tape.
If this adhesive tape is not transparent, but has acquired the shade of a tape - here is the first sign for you.
Or take a piece of cotton with you and rub it on the tape.

Murochka's bags! I am already looking for the name of Svetlana Tregub and I find "The author of the bags is Tatyana Leonova"

I knit with 12 mm wide ribbons, you can take a 6 mm ribbon and knit in two additions. Calculate the consumption of tapes like this - for a small bag you need about 250 m, for a large one - 500 m.

The semicircle of the bag itself is 10 rows. The "tongue" turned out to be 19 loops wide, 13 rows long, the last 5 rows with decreases. I attached it in the same way as the sidewalls. The first row of the “tongue” was pulled out by clinging from the wrong side to the loops of the back half of the bag of the row with which the regiline was tied with a “crustaceous step”.

Fashion Magazine No. 517- 2009
Handbag from Murochka from the new Fashion Magazine No. 517:

Edit
It takes 5-7 33-meter bobbins of ribbons for a small handbag, for mine big bags goes up to 25 bobbins!!!

Today we will talk about knitted handbags. About the most beautiful knitted handbags.

If you are an experienced knitter, look at your purse, sigh, and say: “Oh! This is a masterpiece from Murochka. And you will be right, because it is impossible not to recognize the work of this Master. Unique style, delicate taste, refined elegance!!! And it's all about Svetlana Tregub (nickname Murochka)

Svetlana knits her handbags from .... satin ribbons.

And why does Svetlana knit handbags from satin ribbons???

Everything is simple. The case is to blame.

8 years ago, our Murochka was going to a little girl's birthday party. But since she is a creative person, and she loves needlework, she also wanted to present an unusual gift.

Having bought satin ribbons, and the hook is always at hand, she created a handbag in the evening. This main gift was put in the purse.

So this case for the main gift made on those around - both large and small - the impression that Svetlana has not parted with satin ribbons so far. And her hands create such masterpiece handbags that more than one craftswoman has been “infected” with them.

But this is not an easy job - to knit from satin ribbons. Satin ribbons- it's not a yarn that is both soft and pliable. At first, as Svetlana herself says, her hands hurt a lot. But, as they say, "hunting is worse than bondage." Our hands get used to any work. And then the result of this hard work - OH-GO-GO!

Handbags knits Svetlana crochet No. 3-4. She takes about 10-20 bobbins for one medium-sized handbag satin ribbon(33 m in one reel), if the tape width is 10-12 mm.

Many thanks to Svetlana for allowing me to show her handbags on my website.

If you recommend my site to your friends and click on the buttons social networks, I will be very grateful to you.
Copyright © Attention! Please use the materials of the site with the link

We will need the following materials:

Satin ribbon 1-1.5 cm wide 10-14 rolls;
- satin ribbon 2.5 cm wide for small flowers;
- satin ribbon 4 cm wide for roses;
- beads;
- a flap of tulle for decorating the front wall;
- rigelin;
- fishing line, monofilament or strong threads in the color of the tape;
- magnetic clasp;
- hook number 5-6.

Let's get started!

Buy a large number of tapes of the same color and width, I again failed. Therefore, I had to take inconsistency, 2-4 rolls of each color, but related shades. And I wanted a chocolate color :) No luck ... I had to combine.

I knitted according to the standard oval knitting pattern with single crochets.

Tape 12 mm wide, hook No. 5. The hook was in the hands of my husband, he picked out some kind of glue from the vial :) It was not possible to clean it completely, only the “knitting” part ... So I apologize for the inelegance of the hook in the photo :)
Knitted exactly according to the scheme. I scored 12 air loops, then 2 more for lifting, in the third from the edge (that is, the extreme one according to the scheme), I tied 3 single crochets. Next, we knit 10 columns exactly, in the last loop again we knit 3 columns at once, then again 10 columns straight (one in each loop). Having reached the end, we connect the row with a half-column.
In the next row in each of the three columns, we knit 2 columns (it turns out there are already 6 of them in the semicircular part), then again 10 columns exactly to the second semicircle - 2 columns in each of the three, again 10 columns exactly, we connect with a half-column.
We start the third row by knitting two columns into the last column of the semicircle, the next one is a single column, then again 2 columns and the next one is single. It turns out already 9 tables in each semicircle. And the straight section, both on one side and on the other, remains unchanged - 10 columns.
So, we continue, increasing in each row the number of single columns between double ones by one. I knitted up to 13 columns, that is, one double, 13 single, again 1 double, 13 single, again 1 double, 13 single, 10 columns a flat area, then the second semicircle is similar to the first - one double, 13 single, again 1 double, 13 single, again 1 double, 13 single, 10 columns flat area, connecting semi-column. All. One half of the bag is ready. The perimeter is 110 columns.
Since I had a ribbon of different colors, I started knitting with the lightest, ending with the darkest. It took 3 rolls for one half.

We knit the second half in the same way.
Then we take Rigelin. I have it in the form of a ribbon, flat. It is better, of course, to use a round one, but I did not find one. When I knitted the first handbags, I didn’t have any at all :) And instead of crossbar, I inserted an ordinary telephone cable to fix the shape.

We cut off a piece of crossbar, equal to the length of the perimeter of the connected half of the handbag, with a margin of 2-3 centimeters. The perimeter can be measured with a measuring tape or string. Then I wrap the crossbar around the perimeter, wondering by eye what kind of overlap to make at the junction. I connect by slightly heating the ends with a lighter and pressing them together. And for reliability, I make a couple more turns with transparent tape from above. When we release the glued crossbar, it will take the form of a circle.

For a round bag just right, but we have an oval one! You don't have to be afraid. In the process of tying, the crossbar circle will be fixed and keep the shape of an oval.
We tie with a crustacean step. We press Rigelin to the knitted fabric, tying it together with the fabric.

Then, from the middle of the upper part of the bag, we count 15 columns of the crustacean step and from the inside we begin to tie with ordinary single crochets. I make exactly 80 of them. This is to make it easier to connect parts during assembly.

The same with the second half.

We knit an insert for the sidewall and bottom a single canvas ordinary single crochet. Since I was limited in the ribbon, and I wanted to focus on the brown color, I saved the ribbon and knitted a not very wide strip. I would like it to be wider. I have it only 8 columns wide. The length should correspond to the strapping (80 columns), that is, 80 rows.

There is very little brown ribbon left, so I decided to make combined pens. Fortunately, wooden rings caught my eye, which will be the connecting link between different parts of the bag handles. I knit small brown stripes that will be inserted into the rings and sewn to the bag. Two for each pen.

From a light ribbon I already knit longer strips, 50 loops. The stripes are knitted in the same way as the fabric of the bag, that is, according to the oval pattern. I dial 50 loops, then 2 lifting loops, in the third loop from the edge I knit 3 columns without a crochet, then 48 columns, one in each loop, straight. In the last loop again 3 columns, the rest right before knitting. I connect with a half-column, I hide the end of the ribbon with a hook in a knitting strip. Do not forget to singe the ends with a lighter so that they do not fray and do not crumble :)
Small brown stripes were knitted in the same way, only the number of initial loops was only 15.

From what is left, I knit an inner pocket. I tied it around the perimeter with the last meters of brown tape. The top of the pocket is also tied with a crustacean step, but without crossbar, of course :)

The first stage is finished - all parts are connected and ready for assembly.

As a rule, knitting takes one day.

Before proceeding with the assembly, let's decorate the front wall of the bag. We prepare flowers and beads in the color of the general idea. How to make roses, buds and tiny flowers, I will tell you separately below. So I made them immeasurably in the right shades, because I never have an idea what will turn out in the end and how many flowers will be used.

You can simply sew them on to a knitted fabric, but I prefer to make a backing from old tulle, which I have kept in storerooms since Soviet times. Therefore, I can safely say that there is an element of vintage in the bag :) We cut out an oval from tulle, guipure, lace or other fabric that you like, which we try on.

Don't forget the clasp! I once forgot ... I had to rip off all the beauty from the top, insert the clasp, and then restore the lost.

Therefore, we first insert and strengthen the clasp. My hands are already trained with forging, so I control with my fingers :) Whoever has weaker hands - help yourself with a hammer or a husband :)

Then we baste the tulle with monofilament on front side. And we start sewing flowers. That is, we will “draw” with a ribbon! My favorite part of the job!

I started sewing with monofilament, which suddenly disappeared in the process. After half an hour of searching, the coil was found in the cat's house, already very well gnawed and tangled. I didn't unravel the pieces. She threw the cat hooliganism into a bucket and stole from her husband a spool of thin fishing line, with which she sewed everything else safely.

Sew on the pocket inside the second wall of the bag. I sewed with the same line.
I inserted brown spare parts from handles into wooden rings, sewed them together, then sewed them to both halves of the bag.

Then you can start the general assembly! I take the side. Its length is 80 rows. The binding of each half of the bag is also 80 columns. That is, we connect with a crochet, single crochet, each row of the sidewall with each stub of the strapping.

When we reach the end of the sidewall, we knit its “end” also with single crochets and move on to the second half, which we tie in the same way - column to column!

Yes, do not forget about the second part of the fastener !!! I immediately magnetize it to the first one, already attached to the front part, and combine it with the back of the bag. And I stick the ears of the fastener into those knitting holes where they rest. I straighten my ears - the second part of the fastener is in place.

It remains only to insert long stripes for the handles into the rings and sew them on. All. The bag is ready.

The size of the finished handbag - width 35 cm, height 25 cm.
It took 4 rolls of brown, 4 rolls of light coral, 2 rolls of dark coral and 2 rolls of pink.
Rigelin - about two meters.
Magnetic clasp - 1 pc.
Fishing line 0.18 - spool 30 m.
Tulle - 30 sq. cm.
Beads and flowers are not counted :)
There are 3 rolls of pink ribbon and half a bag of flowers left. I will make an addition! But that's next time!
I hope the master class will come in handy and help everyone who wants to knit a handbag.

I wash my bags in the machine on a delicate cycle. I dry on a towel. Although the shape is reinforced with regilin, and the knitting is quite dense - no deformations! The most important thing is to choose a tape that does not shed at all so that there are no surprises))

Bag examples:

The round ones look pretty too.

Tips from Murochka - I use about 150-300m of ribbon 1 cm wide for my handbags.

It all depends on the size. I also act with the upper contour of the handbag.

The clasp of the handbags is a magnetic button (it is not visible, because it is always hidden under the decor elements). It is best to hide the magnetic buttons under the decor. And I almost always knit the handle with a caterpillar cord and sometimes I tie it with a step (as in the last two handbags). I knit from a satin ribbon, the second side of which is matte. I have not seen another in our stores. But this is not a problem, because. when knitting, an interesting effect is obtained.

Knitted handles I mostly sew with monofilament. But you can plant them
on detachable rings - very convenient and reliable. The semicircle of the bag itself has 10 rows. The "tongue" turned out to be 19 loops wide, 13 rows long, the last 5 rows with decreases. I attached it in the same way as the sidewalls. The first row of the “tongue” was pulled out by clinging from the wrong side to the loops of the back half of the bag of the row with which the regiline was tied with a “crustaceous step”.

When one bobbin ends, I tie the beginning of the second bobbin with a knot (as when knitting with yarn). I burn the ends of the tape and hide inside. You can fold the ribbon in half so that the matte side of the ribbon is not visible. And you can also knit from ribbons 6 mm wide in two additions, then it turns out even tougher. And the stiffness also depends on the tape itself, there are soft tapes, and there are hard ones. I knit with double crochets. The width of the sidewalls can be different (from 2 to 6 double crochets).
It depends on the size of the handbag, the model, the presence of ribbons. I do not line bags, inside they look the same as outside, only, of course, without decor. I try to work carefully, all the "tails" are hidden so that it is difficult to find them (almost impossible). And I make inner knitted pockets for all handbags, except for small and evening ones.

Step by step form "bag".

All knitting - double crochets.
1. We knit a semicircle (the number of rows is arbitrary, depending on what size you want to get.
2. From the lower (straight) part of the semicircle, we collect loops and knit 5-10 (again, it all depends on the desired shape) rows exactly.
3. We knit 1 row along the contour of the obtained form, lay the crossbar along it and tie it with a crustacean step.
4. How to knit sidewalls and finish a handbag can be read in the 4th master class on my website, the principle is the same. Here only a free-form valve is added. Well, handles are also optional - ready-made, knitted, from chains, etc.
About pockets - I knit from ribbons and sew.
About embroidery - of course, nothing should be visible from the back side.
If the embroidery is like this, then I knit another circle and sew it from the inside, if it is on the valve, then I knit another piece according to the size of the valve and connect them with a crustacean step. All irregularities go away after steaming.

I would recommend everything ponytails first singe (so that the tape does not split), then hide, and then also secure with a thread to match or better with monofilament, because. the tape has a tendency to slip and the tails will eventually begin to protrude again ..

About the quality of tapes - The end of the tape in each reel is usually covered with a small piece of tape.

Round bag made of satin ribbons - from here

The handbag is crocheted.

You will need: about 400 m of white satin ribbons 7 mm wide for knitting, 50 m of satin ribbons 12 mm wide in white, pink and cream for embroidery; 3 applications from ribbons in the form of roses with leaves; lace braid 1 m long; crossbar 2 m long; pearl beads, orange and red beads; bobbin threads; lining fabric; magnetic button for fastening; 4 metal rings for pens with a diameter of 4 cm; hook number 4.5; embroidery needle.

Completing of the work

Start by making 2 round parts with a diameter of 25 cm. To do this, knit the first row of 12 C1H into a ring of 5 VPs. Continue with scheme 3, doing 12 increases in each row, distributing them evenly across the canvas. Close the first and last C1H of each row with a connecting loop, and at the beginning of the row do 3 lifting VPs.

Decorate the front part with embroidery. To do this, first, along the contour of the circle, baste a slightly gathered lace braid and outline the location of the “rose” composition. As a guide, use Figure 3, which schematically shows the location of individual motifs and elements of embroidery: 1 - spider web rose, 2 - soft twisted rose, complex rose, 3 - appliqué "rose with leaves", 4 - beads under the "pearl". Embroider white roses - cobwebs of equal diameter around the perimeter of the lace outline. In the center of the composition, place a “bouquet” of soft twisted roses and small-diameter gossamer roses. Sew finished roses with leaves into the middle of large roses. Complete the bouquet with embroidered pearls and beads, filling the space between the flowers as you wish.

In order for the handbag to keep its shape, lay a piece of crossbar along the contour of each finished circle, overlapping the ends, and knit it, securing it with a “crustacean step” so that the crossbar is inside the columns.

Then tie the RLS side part - a strip 8 cm wide and 60 cm long. Connect the sides of the bag with the side part using the “crustacean step”, leaving 18-20 cm at the top of the bag to enter. Cut out and sew the lining, insert into the bag and fix with small Blind stitch along the top edge and along the side of the bag. Sew a magnetic fastener inside the bag.

Next, complete the handles. Tie 4 rings of RLS, sew them to the bag on each side of the edges of the cut for the entry of the hand. Tie 2 caterpillar cords 55 cm long, thread the ends of the cords through the rings, bend them to a height of 3 cm and sew with bobbin threads.

Knitting pattern:

Master class on knitting round red women's handbag crochet with a pattern - from here

Materials:

• red satin ribbons 12 mm wide, flow rate - 230-250 m
• hook number 5
• monofilament (line for shi-tya)
• magnetic button (for fastening)
• crossbar (corsage tape) 5-6 mm wide, consumption-1 m

The main elements of the handbag are 2 identical circles. We knit a circle according to scheme 1. In a ring of five air loops, knit 12 columns with crochets (CCH) and continue knitting a circle, evenly adding 12 CCH in each subsequent row. Having knitted 6 rows, we finish knitting. The resulting circle is from 84 CCH.

To give connected circle stiffness along the contour of the last row, we lay crossbars and tie it with a “crustacean step”. Knitting begins with a single crochet table, but from left to right. For this:

• insert the hook into the column of the underlying row, but to the right of the hook,
• with the head of the hook we move counterclockwise,
• stick the hook into the hole,
• enter under the working thread,
• we throw an air loop,
• we stretch the air loop,
• knit 2 loops together. One column of "crustacean step" is ready.

The weelok is formed by pulling the loop out.

Having thus prepared 2 parts in the shape of a circle, before continuing work, steam the connected parts with a hot iron through a damp cloth. Proceed to knitting the sides of the handbag. To do this, knit 65 CCH along the contour of the circle, inserting the hook under the crossbar. In this case, the part is facing you on the wrong side. Turn knitting to face yourself and knit the 2nd row of dc on 65 loops. The middle 19 loops of the circle remain free.

Steam the sides, fold the parts right side inward and tie the loops of the sides in pairs with single crochets.

Use the magnetic button as a bag closure.

The handle of a crochet knitted round women's bag is a caterpillar cord 30 cm long. Perform 2 air loops without tightening the initial loop. Insert the hook into the initial loop of the chain and knit a single crochet, insert the hook under 2 threads located from the bottom right, grab the thread and, turning away from you to the left, pull through 2 loops on the hook, then, again grabbing the thread, knit 2 loops (single crochet), turning the cord away from you. Insert the hook again under 2 loops from the bottom right and knit a column without a throw, turning the cord. Next, knit a single crochet, inserting a hook under 2 threads from the bottom right, turning the cord away from you. Knit loosely, without tightening. The handle is sewn with monofilament.

The handbag is ready, you can start decorating it.

Handbag from ribbons "Present"

Handbag, crocheted from satin ribbons The author of the handbag is Yulia Bedina. The bag is crocheted from satin ribbons as a birthday present. Bag size: 22 x 33 cm.

For knitting, you need: 125 m of satin ribbon 12 mm wide; 240 m of satin ribbon 6 mm wide; two meters of white, milky and brown ribbon 3-5 cm wide (for roses); beads and beads; regelin; button or Velcro; hook No. 4 and No. 3.

We knit in two ribbons to give the bag greater strength. With hook No. 4 with a 12 mm tape, we make the bottom of the bag. To do this, we collect a chain of 30 air loops and tie it with columns without a crochet according to the scheme. It turns out an elongated oval, if desired, it can be expanded by tying a few more rows of a column without a crochet.

We tie the finished bottom of the bag with 1 row of the “step step” (for the front loop of the column).

With hook No. 3 with a 6 mm tape, we carry out the main part of the bag: with a double crochet for the back loop of the last row of the bottom. At the same time, we knit regelin in the first row of the main part of the bag. At a height of 22 cm, we finish knitting.

Handles: with a 12 mm tape, hook No. 3, we collect 90 air loops and tie them on both sides with a single crochet.

Valve: at a distance of 9 cm from the edge of the bag, we fasten a tape 12 mm wide and with a column with a crochet we make a part with a size of 15 * 16 cm.

We sew handles to the finished bag, put a button (or sew Velcro). We decorate bags with beads, beads, roses from satin ribbons.

Handbag master class

How to tie handles to a bag -