How a chevron is sewn onto a guard's sleeve. The location of the chevrons on the uniform of a private security officer. What provisions were planned for approval?

The generally accepted arrangement of chevrons on a security guard’s uniform is in many ways similar to that of law enforcement agencies, but it is worth considering this issue in a little more detail. In general, this is written in detail in the order of the Ministry of Justice of the Russian Federation dated 211 On approval of the description of the uniform of employees of system bodies and the rules for wearing them. Police chevrons on which side? In general, chevrons can be sewn on the sleeve, chest and back. Badges indicating a person’s membership in various units or services are sewn in the center of the pocket or on the right sleeve. In the Other career questions section, the question on which sleeve is the security chevron with coat of arms sewn on? How to properly sew chevrons onto a security guard's uniform. As we know, previously chevrons were not sewn onto the shirt on the old police uniform. Instructions on how to sew a chevron onto a military office uniform and other clothing

Sewing stripes and chevrons to the uniform of a police officer or other department is not as easy as it might seem. Chevrons Chevron is a laconic image applied to the fabric, in our case, using how to attach a patch to clothing. Security has recently become an increasingly popular service. Many people are tormented by the question of how to sew on a security guard's chevron. On the left sleeve of a casual jacket, an insulated jacket and a shirt, 6 cm below the shoulder. There are 15 options in total. For different units, the inscription, size and color may differ, but they are still sewn in one place on the left side of the chest, 1 cm above the top seam

A chevron with the Security brand name is sewn in the middle. Yes, chevrons are sewn on both dresses with long and short sleeves. Security guard chevrons and stripes are arranged differently depending on the requirements for the uniform of employees, which are usually prescribed in. Before sewing stripes and chevrons onto the uniform, you should select. The rules for wearing insignia on the uniform are established by orders of the Ministry of Internal Affairs of the Russian Federation No. 372 dated Rules for the placement of insignia The location of chevrons on the uniform of a private security company employee. Each security company introduces its own uniform and its own rules for sewing on badges.

All paraphernalia must be sewn onto uniforms using blue or black threads. Before On other types of uniforms, the chevron is sewn onto the uniform and sewn on.

Private security companies appeared in the USSR during the era of perestroika, but were officially enshrined in legislation in 1992. The activities of private security companies are regulated by the Law on Private Detective and Security Activities in the Russian Federation of March 11, 1992.

Security guard patches are very diverse. Below we will tell you about them and explain how to sew them correctly. We also do machine embroidery and will make you patches according to your design!

Security chevrons

A necessary thing in every private security company is security emblems. They are required when organizing, they increase the rating of the ORR. You can't go anywhere without them!

Various symbols are used to create such emblems. State symbols of the Russian Federation are often used: the coat of arms, the flag. Sometimes elements of uniform patches are used: these can be emblems of military branches, recognizable symbols. Ancient heraldry is often used: lions and bears proudly grin from the emblem of the ChOO, symbolizing the courage and bravery of their bearers.

"Security" patch

In addition to various emblems, inscriptions are also used. The Security patch is the most popular of them. It is often embroidered with reflective threads, or threads that glow in the dark. This allows the guard to demonstrate his status even at night or in a dark room.

A large “Security” patch on the back is also a common attribute of a security guard. This patch is sewn onto a jacket or uniform. Shoulder stripes are also ordered as a set.

Private Security Form

Currently, each security organization chooses its own uniform, but this is not the case everywhere. For example, in Novosibirsk a common uniform has been introduced for all private security companies, which can only be distinguished by their chevron.

This form of private security company is modeled after other government services: the Ministry of Internal Affairs, Russian Railways and others. The correct placement of chevrons plays an important role.

On the back of the jacket there is a large “Security” patch made of yellow reflective material. On the left side of the chest there is a small “Security” badge. On the right side of the chest there is a badge with the name of the guard. On the left shoulder there is a chevron with the coat of arms of the Russian Federation and the inscription “Security”. On the right sleeve there is a CHOP chevron.

If your private security company does not have special rules for wearing a uniform, then it is better to follow the above instructions.

Security chevrons: how to sew

Many people are tormented by the question of how to sew on a security guard's chevron.

There are no such strict rules as in the army. Each private security company has its own charter, where you should look for information on how to properly sew on security guard chevrons. However, we can give some general recommendations.

CHOP chevrons usually come in three types: chest, sleeve, and back. The easiest one to distinguish is the one on the back: it is the largest. Chest and sleeve chevrons are often the same, but sometimes only the emblem is attached to the sleeve, and the surname or the inscription “Security” is attached to the chest.

So. Sew the back patch in the center of the back if it is an emblem, and if it is an inscription, closer to the top. Sew the chest patch above the pocket. The sleeve patch is sewn either over the pocket, if there is one, or so that there is 8 cm from the top of the patch to the shoulder seam.

If the location of the chevrons on a security guard’s uniform is not specified in your regulations, then you should sew them on exactly this way.

The sleeve chevron is usually attached to the left sleeve, and the blood type patch is on the left pocket.

Security emblems on hats

Not every private security uniform includes hats, but sometimes it is necessary to apply the emblem there too. Most often, caps are used, sometimes hats, even baseball caps.

In such cases, the emblem of the private security company or the inscription “Security” is located on the front of the product in the center. You can sew on a patch, or you can embroider it on the product itself.

Security patches in Prostovyshivka

Any emblem will become a patch, you just need to convert the image into stitch format. This is called layout rendering. In a special program, our designer will prescribe the settings for each stitch. This is complex work, on which the result directly depends, so the layout is paid separately and once and costs 500-2000 rubles. When you order 500 copies or more, we make it for you free of charge!

You personally approve the layout, and then we embroider a trial copy on our material. Only after the sample is approved is the entire edition embroidered. The price for application depends on the number of stitches. To make it easier for you to navigate, we have compiled a table of the approximate cost of embroidery depending on its size.

The work of a security guard in large populated areas has become quite widespread. Particular attention is paid to the uniform of the security guard, which gives the employee a neat appearance and distinguishes him from other people inside and outside the premises. The need for such clothing arose during the period of massive emergence of security companies. Due to wear and tear, the mold needs to be replaced periodically.

Security guard uniform requirements

For security guards' uniforms, practicality during work is important. Security company personnel serve not only indoors, but also outdoors. This process continues continuously throughout the day, in any weather. In emergency circumstances, a security officer must respond quickly. The uniform should protect against unfavorable environmental factors - wind, high or low air temperature, precipitation, and also ensure freedom of movement. The fabric used for sewing must be resistant to general types of dirt and mechanical friction, and if necessary, have a water-repellent impregnation.

Workwear for security officers includes suits - summer and winter “Strike” (jacket + trousers); shirts (long or short sleeves), ties and trousers for indoor work; headwear (hats and caps, winter and summer); jumpers, sweatshirts and T-shirts. The material for the uniform is knitwear (wool with acrylic, pan; cotton) and mixed fabrics (polyester with cotton, viscose; polyester with spandex; Oxford) fabrics. Color options include camouflage, grey, blue, light blue, brown and black. Particularly important are accessories such as stripes and chevrons, which distinguish security workers from each other.

Purpose of stripes and chevrons, their placement and methods of fixation

Chevrons and stripes on a security guard’s uniform inform people around him about his functions, personal data and the name of the company.

According to the legislation of the Russian Federation, all private companies (including security companies) operate in accordance with the charter. It determines the procedure and conditions for the functioning of the company, and may also contain requirements for the appearance of personnel, the placement of chevrons on uniforms and stripes. If such rules are not written down, it is necessary to use generally accepted recommendations.

The longest patch (up to 20 - 30 cm) is attached to the back, and the image should be in the center, and the text should be at the level of the person’s shoulder blades. The chevron is placed 8-10 cm below the shoulder seams. On the left sleeve is the name of the security company, on the right are the generally accepted emblems (the inscriptions “Security” or “Security”, an image of a sword, etc.). A patch with the employee’s surname and name is attached to the left breast pockets, and the blood type is placed on the right. This arrangement of stripes and chevrons on security guards’ clothing is advisory in nature.

Inscriptions and images for chevrons or stripes are made using various printing methods or machine embroidery on fabric. The following inscriptions are applied to the stripes:

• security;
• security;
• security Service;
• security officer.

Patches come in the form of strips (sizes 120×30, 125×35, 250×75, 255×78 and 296×77 mm) or arcs (30×118 and 33×120 mm). The difference between stripes is that they are placed on the front or middle of the headdress or on T-shirts, shirts, jackets (back or chest).

Chevron is intended for clothing sleeves. In addition to the word “Security”, they depict a shield, sword and symbols of Russia (coat of arms, flag). The chevrons are the same in shape, their dimensions are 99x85, 104x87 and 105x89 mm.

There are several ways to attach chevrons and stripes to your uniform. The most convenient way is to use Velcro. You can glue them using thermal film and an iron. The most reliable method is to correctly sew these elements to the form. This is done on a machine using a sewing stitch.



Various stripes are a popular decoration for clothing, accessories and even shoes. It is not difficult to purchase them, but it is much more difficult to sew them correctly, especially for those who do not have much experience in using a needle. If you need to sew, the difficulties become greater - in addition to the quality of the stitches, the location of the element is important, everything is very strict here.

You can do the work yourself; our masters have shared their secrets. We offer a manual option, since not everyone has a sewing machine, and working with it requires certain skills. The manual method is accessible to everyone, and even if you have never held a needle in your hands, you will succeed.

How to sew on a patch: preparing the product

So, you need to attach a chevron or a branded patch to a kimono or other sports uniform, to casual clothing, to a uniform, for example. The first thing to do is decide on the location of the element. After this, the patch should be attached to the clothing. You can do this in several ways:

• using double-sided tape;
• using tailor's pins;
• using water-soluble textile glue.

The easiest way to work is with double-sided tape - it holds the element well on the clothing, does not leave marks, but it can be easily removed - after you make the first few stitches and the chevron is partially sewn.

Water-soluble textile adhesive is sold in specialized stores. It dries quickly and can be removed with plain water. It is easy to work with, but there is a drawback - the product will need to be washed after finishing, otherwise glue will remain on the wrong side.
Tailor's pins are easy to use and convenient. To attach the patch, it is pressed tightly to the clothing, pierced through with a pin, and the pin is brought from the inside out onto the face. If the element is large, you need to attach it in several places.

But those who do not have tape, pins or glue on hand can simply outline the chevron with tailor's chalk or a regular bar of soap.

How to sew a ready-made patch yourself

So, the chevron is attached or the place of its attachment is marked. Now you need a regular sewing needle and thread. Optimally, the color of the thread should match the color of the chevron or its edging. In another case, the closest shade is selected. A regular thread is used (polyester, No. 40), it is threaded into the eye of the needle and pulled so that the ends of the thread are even.

Now you need to tie a knot at the ends of the thread. So, we have a double thread, its end is wound around the finger one and a half turns. Now between this turn and the finger you need to stretch the needle and pull the finger out of the formed loop. All that remains is to simultaneously pull the needle and the “loop” to tighten the knot. If a tail has formed after the knot, it is carefully cut off, but not at the root.

How to sew a chevron? Immediately you need to secure a knot on it, from the wrong side of the patch. To do this, a needle is used to pierce the underside of the element, in the area of ​​the edging, but so that it does not extend onto the front part. You need to pull the thread until the knot is secured. After this, you can begin sewing the element onto a uniform, kimono or workwear.

Attaching a patch with a blind stitch

It is best to sew elements to clothing using a blind stitch. It's easy to do. The needle is immediately inserted into the fabric of the garment, strictly along the inner edge of the edging, and brought out to the wrong side. After a short distance (about 8 mm), adhering to the edging line, the needle is brought out from the wrong side to the front side, passing through the patch. The next stitch is from the face to the wrong side, again through the patch. Knit stitches are made shorter than purl stitches, approximately twice as long.

It is better to do all the stitches in one movement: pierce the needle from the front side and immediately bring it out again to the face, and only then pull the thread through. This makes it faster, easier and more accurate. When sewing, hold the area of ​​clothing to be sewn with your second hand, so that your palm feels the edges of the chevron.

Sewing using the “back needle” method

The second seam option is called “back needle”. It is a little more complex in execution, but if you stick to the same length of stitches, you will get the effect of an even machine stitch, and the seam itself will be much stronger. It is performed as follows:

• 1. The needle is inserted into the fabric and brought out to the front side - as in the first option.
• 2. The thread is pulled through completely.
• 3. Now the needle is inserted again from the face to the wrong side, but in the opposite direction, ending up in the place where the thread comes out (that is, a step is taken back). It turned out to be one stitch.
• 4. From the inside to the face, the needle is brought forward, but so that it comes out at a distance equal to the length of the first stitch.
• 5. Now on the front side a stitch is made in the opposite direction, inserting the needle into the place where the previous stitch ends.

You should have a continuous line, without gaps.

Over-the-edge seam method

Another option is an over-the-edge seam. It must be done with threads of strictly the same color as the edging. The direction of the seam in the edging is horizontal, in the same direction you should make your seams. The needle is brought out from the inside to the face, strictly along the inner edge of the edging. The needle is brought out from the face to the wrong side through the edging - in this case, the patch will fit tightly to the fabric of the clothing. The back seam is made by bringing the needle from the back to the face at an angle - you need it to come out strictly at the inner edge of the edging.

Using the first or second option, you need to sew the patch along its entire circumference/perimeter. The last stage is the tack or knot. It is needed to prevent the thread from unraveling. The fastening is done either on the wrong side of the garment or on the front side, under the edging of the patch. For a knot, the needle is threaded as when making a small stitch, but not pulled through. Make a loop around the needle with thread; just wrap the needle twice. After this, the needle and thread are pulled until it stops. That's it, the thread can be cut - the tack is done.

The second option is to make a small stitch with a needle, pulling the thread, but only halfway. And the needle is inserted into the formed loop, after which the thread is tightened until it stops.

How to sew on a patch correctly

So, we figured out the process itself - in fact, there is nothing complicated in such sewing. But you need to correctly determine the place of the chevron - if you can sew on anything and any way you like on everyday clothes, then sewing patches on the uniform of a security guard, an employee of the Ministry of Emergency Situations or the Ministry of Internal Affairs is strictly regulated. However, as well as for kimonos or other types of sportswear, and so on.

Regulations for signs of the Ministry of Internal Affairs

This uniform uses breastplate and sleeve insignia. The badge is sewn above the shirt or jacket pocket, on the right side. The inscription on the back is placed in the center, but if there is a reflective strip, then 10 mm below it.

The Ministry of Internal Affairs badge is attached to the left sleeve, at a distance of 80 mm from the shoulder seam. The sleeve chevron indicating the name of the unit is located on the right sleeve, at the same distance from the shoulder seam as the Ministry of Internal Affairs badge. But in the field uniform, such a patch is located in the central part of the pocket on the sleeve.

The badge of special rapid response departments is sewn onto the left sleeve, placing it above the badge of the Ministry of Internal Affairs - the distance to the top of the sleeve is 20 mm. There are also requirements for cadet badges. Special stripes are attached to the left sleeve, positioned 10 mm lower than the Ministry of Internal Affairs sign.

Regulations for EMERCOM chevrons

Sleeve patches are used on the uniforms of the Ministry of Emergency Situations units. placed according to the same regulations as the Ministry of Internal Affairs sign - in the center of the left sleeve, at a distance of 80 mm from the shoulder seam.

Sleeve insignia indicating membership in one of the units are sewn on the right sleeve, in the same way as the Ministry of Emergency Situations insignia (in the center, at a distance of 80 mm).

Badges for cadets are placed on the left sleeve, 10 mm below the sign of the Ministry of Emergency Situations. Be sure to place them at an angle down. Those signs that are golden squares with a gray-blue base must be sewn with an upward angle.

Other rules for sewing on patches. There are many such rules, for each type of uniform or uniform, they are established either by state standards or by certain organizations. Therefore, in each specific case, you need to figure out how to sew a chevron, for example, on a security guard’s jacket or, branded clothing, and so on.

But there are general rules for all types of patches:

• 1. If the element is sleeveless and there is a pocket on the sleeve, the patch is sewn in the center of the pocket. Naturally, so that the pocket itself is not sewn up.
• 2. It is necessary to accurately determine the location of the chevron - strictly in the middle.
• 3. Side chevrons of rectangular or square shape must be positioned strictly vertically. Polygonal products are placed in accordance with the regulations.

Considering that some provisions and questions regarding private and investigative (detective) activities require additions and clarifications, members of the Government made appropriate changes on August 14, 1992. I propose to discuss with the readers of my blog the main nuances of the changes, as well as the relevance of the adjustments made.

What provisions were planned for approval?

First of all, I want to point out the list of those points that needed to be planned for clarification and modification. It was necessary to approve those types of objects that should not be subject to security activities. In addition, it was planned to approve a list of types of weapons or special means allowed for private security to protect entrusted property, one’s own life and health.

Separate paragraphs of this regulatory act clarify various rules governing the actions, behavior, and rights of employees in the immediate workplace. Such rules include rules for issuing certificates for private security guards, rules for training private security officers or preparing a conclusion on the inadmissibility of specific individuals to work.

I also want to emphasize to my readers that the amended rules determine the wearing of uniforms, the acquisition, storage, and carrying of firearms, ammunition for them, and special equipment.

1. A decent appearance of a security guard ensures the moral right to self-respect, helps strengthen citizens' trust in security companies, and influences people's behavior and actions.
2. A security guard at a private enterprise should: wear uniform in accordance with established requirements, clean and neat, well fitted and ironed; maintain an exemplary appearance that commands respect from colleagues and citizens; demonstrate drill bearing, stand straight, with shoulders back, do not slouch, walk with a firm, energetic step; adhere to a healthy lifestyle, observe the rules of personal and public hygiene.
3. In the case of contractual relations or conditions at a guarded facility, it is allowed to wear civilian clothes, a suit (dress) and shoes of a strict business style, in a soft color, emphasizing the neatness and neatness of the guard.
4. A male security guard must always have a neat haircut, carefully shaved, and neatly dressed.
5. The female security guard is advised to observe modesty and reasonable sufficiency in the use of cosmetics and wearing jewelry.
6. A security guard should not mix uniform and civilian clothing, keep his hands in his pockets, wear uncleaned or worn-out shoes, or wear uniforms that have lost their proper appearance.

A security guard who violates the principles and norms of professional ethics loses his good name and honor, discredits his unit, and is deprived of the moral right to respect, support and trust from citizens, colleagues and colleagues.

TYPES OF CLOTHING UNIFORM

Summer casual No. 1

Consists of:

• black “Guard” headdress with the signature “Guard” cockade;
• black “Security Guard” jacket with zipper or buttons;
• a black “Guard” T-shirt or a “Security” shirt with long sleeves and a tie;
• black belt;
• black boots or ankle boots; under certain terrain conditions, wearing black rubber boots is allowed;
• It is used when serving in warm rooms, as well as at outdoor posts in the summer at an ambient temperature of +10 - +20 degrees.

Summer casual No. 2

Consists of:

• black “Guard” headdress with the signature “Guard” cockade;
• "Security" shirt, light blue with long sleeves
• black tie;
• black “Security” trousers;
• black belt;
• Used at outdoor temperatures of +20 degrees and above.

Summer casual No. 3

Consists of:

• black "Guard" headdress with the signature "Guard" badge
• (it is allowed to enter the room without a headdress);
• “Security Guard” shirt, light blue with short sleeves;
• black tie;
• black “Security” trousers;
• black belt;
• black boots,
• Used at outdoor temperatures of +30 degrees and above.

Summer casual No. 4

The performance of service in this type of form is agreed upon with the representative of the “Customer”.

Consists of:

• T-shirt “Security Guard”, black;
• black “Security” trousers;
• black belt;
• black boots, ankle boots, rubber boots.
• It is used when serving in warm rooms, at special facilities by order of the director in the summer at temperatures of +25 degrees and above.

Summer casual special No. 1

Consists of:

• without headdress;
• black suit of “classic style”;
• black “classic style” belt;
• black “classic style” boots,
• "Alerts" and boots are not allowed;
• classic style shirt
• light blue or pink with long sleeves;
• By agreement with the “Customers” of security services at an ambient temperature of +10 degrees and above.

Summer casual special No. 2

Consists of:

Consists of:

• without headdress;
• black “classic style” trousers;
• black suit “classic style”;
• “classic style” boots in black,
• "Alerts" and boots are not allowed;
• black “Security” tie;
• a “classic style” shirt in light blue or pink with short sleeves;
• It is used by order of the director at certain security facilities in agreement with the “Customers” of security services at an ambient temperature of +30 degrees and above.

Winter casual No. 1

Consists of:

• a black “Guard” cap with a visor and the signature “Guard” badge;
• “Security Guard” insulated autumn-winter jacket, black;
• casual black "Security" jacket with zipper or buttons;
• a “Guard” shirt in light blue with long sleeves with a “Security” tie, or a “Security” T-shirt in black;
• black “Security” trousers;
• black belt;
• insulated “Belts” boots or insulated rubber boots;
• It is used at outdoor temperatures of + 10 - -10 degrees, as well as for wearing inside cold protected premises in the autumn - winter period.

Winter casual No. 2

insulated "Security" jacket;

Casual black jacket "Security Officer" with buttons;

“Security” shirt, light blue with long sleeves;

black Security Guard tie;

insulated black "Security" trousers;

black belt;

insulated boots “Belts” or felt boots.

black gloves or two-fingered black mittens;

It is used at outdoor temperatures of -10 degrees and below, as well as for wearing inside cold protected premises in winter.

When the outside air temperature is -25 degrees and below, it is allowed to replace insulated trousers with insulated overalls;

Basic provisions

In order for the security guard or his management to know exactly what actions can be considered legal in a particular case, the Government of the Russian Federation introduced amendments that are important for various subsections. I, Sergey Mashchenko, would like to point out to subscribers and visitors of my blog the main provisions of the adopted adjustments:

1. Various types of weapons permitted for security activities, but having an external resemblance to automatic military weapons, must be marked in special places with paint. This is carried out by the manufacturer, who also determines the location of application and the color of the paint.
2. The executive authorities in the republics of the Russian Federation must allocate the required number of employees to the relevant bodies for monitoring and licensing private security and detective activities.
3. The amount of payment for using different types of weapons, as well as the procedure for using them, is determined by the Ministry of Finance and the Ministry of Defense of the Russian Federation.

These rules and clarifications came into force from the moment the Resolution was adopted. In addition, a separate subsection defines a list of objects that should not be protected by private structures.

Subscribe to my blog ( –